y2019/constants.cc

#include "y2019/constants.h"

#include <inttypes.h>

#include <map>

#if __has_feature(address_sanitizer)
#include "sanitizer/lsan_interface.h"
#endif

#include "aos/logging/logging.h"
#include "aos/mutex/mutex.h"
#include "aos/network/team_number.h"
#include "aos/once.h"
#include "y2019/control_loops/superstructure/elevator/integral_elevator_plant.h"
#include "y2019/control_loops/superstructure/intake/integral_intake_plant.h"
#include "y2019/control_loops/superstructure/stilts/integral_stilts_plant.h"
#include "y2019/control_loops/superstructure/wrist/integral_wrist_plant.h"

namespace y2019 {
namespace constants {

using ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator;

const int Values::kZeroingSampleSize;
constexpr size_t Values::kNumCameras;

namespace {

const uint16_t kCompTeamNumber = 971;
const uint16_t kPracticeTeamNumber = 9971;
const uint16_t kCodingRobotTeamNumber = 7971;

constexpr double FeetToMeters(double ft) {
  return 0.3048 * ft;
}
constexpr double InchToMeters(double in) {
  return 0.0254 * in;
}
constexpr double DegToRad(double deg) {
  return deg * M_PI / 180.0;
}

const Values *DoGetValuesForTeam(uint16_t team) {
  Values *const r = new Values();
  Values::PotAndAbsConstants *const elevator = &r->elevator;
  ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
      ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
      *const elevator_params = &(elevator->subsystem_params);
  Values::PotAndAbsConstants *const stilts = &r->stilts;
  ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
      ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
      *const stilts_params = &(stilts->subsystem_params);
  Values::PotAndAbsConstants *const wrist = &r->wrist;
  ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
      ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
      *const wrist_params = &(wrist->subsystem_params);
  ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
      ::frc971::zeroing::AbsoluteEncoderZeroingEstimator> *const intake =
      &r->intake;

  // Elevator constants.
  elevator_params->zeroing_voltage = 3.0;
  elevator_params->operating_voltage = 12.0;
  elevator_params->zeroing_profile_params = {0.1, 1.0};
  elevator_params->default_profile_params = {4.0, 16.0};
  elevator_params->range = Values::kElevatorRange();
  elevator_params->make_integral_loop =
      &control_loops::superstructure::elevator::MakeIntegralElevatorLoop;
  elevator_params->zeroing_constants.average_filter_size =
      Values::kZeroingSampleSize;
  elevator_params->zeroing_constants.one_revolution_distance =
      M_PI * 2.0 * constants::Values::kElevatorEncoderRatio();
  elevator_params->zeroing_constants.zeroing_threshold = 0.005;
  elevator_params->zeroing_constants.moving_buffer_size = 20;
  elevator_params->zeroing_constants.allowable_encoder_error = 0.9;

  // Wrist constants.
  wrist_params->zeroing_voltage = 4.0;
  wrist_params->operating_voltage = 12.0;
  wrist_params->zeroing_profile_params = {0.5, 2.0};
  wrist_params->default_profile_params = {10.0, 40.0};
  wrist_params->range = Values::kWristRange();
  wrist_params->make_integral_loop =
      &control_loops::superstructure::wrist::MakeIntegralWristLoop;
  wrist_params->zeroing_constants.average_filter_size =
      Values::kZeroingSampleSize;
  wrist_params->zeroing_constants.one_revolution_distance =
      M_PI * 2.0 * constants::Values::kWristEncoderRatio();
  wrist_params->zeroing_constants.zeroing_threshold = 0.0005;
  wrist_params->zeroing_constants.moving_buffer_size = 20;
  wrist_params->zeroing_constants.allowable_encoder_error = 0.9;

  // Intake constants.
  intake->zeroing_voltage = 3.0;
  intake->operating_voltage = 12.0;
  intake->zeroing_profile_params = {0.5, 3.0};
  intake->default_profile_params = {6.0, 30.0};
  intake->range = Values::kIntakeRange();
  intake->make_integral_loop =
      control_loops::superstructure::intake::MakeIntegralIntakeLoop;
  intake->zeroing_constants.average_filter_size = Values::kZeroingSampleSize;
  intake->zeroing_constants.one_revolution_distance =
      M_PI * 2.0 * constants::Values::kIntakeEncoderRatio();
  intake->zeroing_constants.zeroing_threshold = 0.0005;
  intake->zeroing_constants.moving_buffer_size = 20;
  intake->zeroing_constants.allowable_encoder_error = 0.9;
  intake->zeroing_constants.middle_position = Values::kIntakeRange().middle();

  // Stilts constants.
  stilts_params->zeroing_voltage = 3.0;
  stilts_params->operating_voltage = 12.0;
  stilts_params->zeroing_profile_params = {0.1, 0.5};
  stilts_params->default_profile_params = {0.15, 0.5};
  stilts_params->range = Values::kStiltsRange();
  stilts_params->make_integral_loop =
      &control_loops::superstructure::stilts::MakeIntegralStiltsLoop;
  stilts_params->zeroing_constants.average_filter_size =
      Values::kZeroingSampleSize;
  stilts_params->zeroing_constants.one_revolution_distance =
      M_PI * 2.0 * constants::Values::kStiltsEncoderRatio();
  stilts_params->zeroing_constants.zeroing_threshold = 0.0005;
  stilts_params->zeroing_constants.moving_buffer_size = 20;
  stilts_params->zeroing_constants.allowable_encoder_error = 0.9;

  r->camera_noise_parameters = {.max_viewable_distance = 10.0,
                                .heading_noise = 0.02,
                                .nominal_distance_noise = 0.06,
                                .nominal_skew_noise = 0.1,
                                .nominal_height_noise = 0.01};

  switch (team) {
    // A set of constants for tests.
    case 1:
      elevator_params->zeroing_constants.measured_absolute_position = 0.0;
      elevator->potentiometer_offset = 0.0;

      intake->zeroing_constants.measured_absolute_position = 0.0;

      wrist_params->zeroing_constants.measured_absolute_position = 0.0;
      wrist->potentiometer_offset = 0.0;

      stilts_params->zeroing_constants.measured_absolute_position = 0.0;
      stilts->potentiometer_offset = 0.0;

      // Deliberately make FOV a bit large so that we are overly conservative in
      // our EKF.
      for (auto &camera : r->cameras) {
        camera.fov = M_PI_2 * 1.1;
      }
      r->cameras[0].pose.set_theta(M_PI);
      r->cameras[1].pose.set_theta(0.26);
      r->cameras[2].pose.set_theta(-0.26);
      r->cameras[3].pose.set_theta(M_PI_2);
      r->cameras[4].pose.set_theta(-M_PI_2);
      break;

    case kCompTeamNumber:
      elevator_params->zeroing_constants.measured_absolute_position = 0.024407;
      elevator->potentiometer_offset = -0.075017 + 0.015837 + 0.009793 - 0.012017;

      intake->zeroing_constants.measured_absolute_position = 1.860016;

      wrist_params->zeroing_constants.measured_absolute_position = 0.163840;
      wrist->potentiometer_offset = -4.257454;

      stilts_params->zeroing_constants.measured_absolute_position = 0.030049;
      stilts->potentiometer_offset = -0.015760 + 0.011604;
      break;

    case kPracticeTeamNumber:
      elevator_params->zeroing_constants.measured_absolute_position = 0.167722;
      elevator->potentiometer_offset = -0.022320 + 0.020567 - 0.022355 - 0.006497;

      intake->zeroing_constants.measured_absolute_position = 1.756847;

      wrist_params->zeroing_constants.measured_absolute_position = 0.357394;
      wrist->potentiometer_offset = -1.479097 - 2.740303;

      stilts_params->zeroing_constants.measured_absolute_position = 0.048258;
      stilts->potentiometer_offset = -0.093820 + 0.0124 - 0.008334;
      break;

    case kCodingRobotTeamNumber:
      elevator_params->zeroing_constants.measured_absolute_position = 0.0;
      elevator->potentiometer_offset = 0.0;

      intake->zeroing_constants.measured_absolute_position = 0.0;

      wrist_params->zeroing_constants.measured_absolute_position = 0.0;
      wrist->potentiometer_offset = 0.0;

      stilts_params->zeroing_constants.measured_absolute_position = 0.0;
      stilts->potentiometer_offset = 0.0;
      break;

    default:
      LOG(FATAL, "unknown team #%" PRIu16 "\n", team);
  }

  return r;
}

const Values *DoGetValues() {
  uint16_t team = ::aos::network::GetTeamNumber();
  LOG(INFO, "creating a Constants for team %" PRIu16 "\n", team);
  return DoGetValuesForTeam(team);
}

}  // namespace

const Values &GetValues() {
  static ::aos::Once<const Values> once(DoGetValues);
  return *once.Get();
}

const Values &GetValuesForTeam(uint16_t team_number) {
  static ::aos::Mutex mutex;
  ::aos::MutexLocker locker(&mutex);

  // IMPORTANT: This declaration has to stay after the mutex is locked to avoid
  // race conditions.
  static ::std::map<uint16_t, const Values *> values;

  if (values.count(team_number) == 0) {
    values[team_number] = DoGetValuesForTeam(team_number);
#if __has_feature(address_sanitizer)
    __lsan_ignore_object(values[team_number]);
#endif
  }
  return *values[team_number];
}

constexpr size_t Field::kNumTargets;
constexpr size_t Field::kNumObstacles;

Field::Field() {
  // TODO(james): These values need to re-verified. I got them by skimming the
  // manual and they all seem to be pretty much correct.
  //
  // Note: Per //frc971/control_loops/pose.h, coordinate system is:
  // -In meters
  // -Origin at center of our driver's station wall
  // -Positive X-axis pointing straight out from driver's station
  // -Positive Y-axis pointing straight left from the driver's perspective
  // -Positive Z-axis is straight up.
  // -The angle of the target is such that the angle is the angle you would
  //  need to be facing to see it straight-on. I.e., if the target angle is
  //  pi / 2.0, then you would be able to see it face on by facing straight
  //  left from the driver's point of view (if you were standing in the right
  //  spot).
  constexpr double kCenterFieldX = FeetToMeters(27.0) + InchToMeters(1.125);

  constexpr double kFarSideCargoBayX =
      kCenterFieldX - InchToMeters(20.875);
  constexpr double kMidSideCargoBayX = kFarSideCargoBayX - InchToMeters(21.75);
  constexpr double kNearSideCargoBayX = kMidSideCargoBayX - InchToMeters(21.75);
  constexpr double kSideCargoBayY = InchToMeters(24 + 3 + 0.875);
  constexpr double kSideCargoBayTheta = -M_PI_2;

  constexpr double kFaceCargoBayX =
      kCenterFieldX - InchToMeters(7 * 12 + 11.75 + 9);
  constexpr double kFaceCargoBayY = InchToMeters(10.875);
  constexpr double kFaceCargoBayTheta = 0.0;

  constexpr double kRocketX = kCenterFieldX - FeetToMeters(8);
  constexpr double kRocketY = InchToMeters((26 * 12 + 10.5) / 2.0);

  constexpr double kRocketPortX = kRocketX;
  constexpr double kRocketPortY = kRocketY - 0.70;
  constexpr double kRocketPortTheta = M_PI_2;

  // Half of portal + guess at width * cos(61.5 deg)
  const double kRocketHatchXOffset = InchToMeters(14.634);
  const double kRocketHatchY = kRocketPortY + InchToMeters(9.326);
  const double kRocketNearX = kRocketX - kRocketHatchXOffset;
  const double kRocketFarX = kRocketX + kRocketHatchXOffset;
  constexpr double kRocketNearTheta = DegToRad(28.5);
  constexpr double kRocketFarTheta = M_PI - kRocketNearTheta;

  constexpr double kHpSlotY = InchToMeters((26 * 12 + 10.5) / 2.0 - 25.9);
  constexpr double kHpSlotTheta = M_PI;

  constexpr double kNormalZ = 0.80;
  constexpr double kPortZ = 0.99;

  const Pose far_side_cargo_bay({kFarSideCargoBayX, kSideCargoBayY, kNormalZ},
                                kSideCargoBayTheta);
  const Pose mid_side_cargo_bay({kMidSideCargoBayX, kSideCargoBayY, kNormalZ},
                                kSideCargoBayTheta);
  const Pose near_side_cargo_bay({kNearSideCargoBayX, kSideCargoBayY, kNormalZ},
                                 kSideCargoBayTheta);

  const Pose face_cargo_bay({kFaceCargoBayX, kFaceCargoBayY, kNormalZ},
                            kFaceCargoBayTheta);

  const Pose rocket_port({kRocketPortX, kRocketPortY, kPortZ},
                         kRocketPortTheta);

  const Pose rocket_near({kRocketNearX, kRocketHatchY, kNormalZ},
                         kRocketNearTheta);
  const Pose rocket_far({kRocketFarX, kRocketHatchY, kNormalZ},
                        kRocketFarTheta);

  const Pose hp_slot({0.0, kHpSlotY, kNormalZ}, kHpSlotTheta);

  const ::std::array<Pose, 8> quarter_field_targets{
      {far_side_cargo_bay, mid_side_cargo_bay, near_side_cargo_bay,
       face_cargo_bay, rocket_port, rocket_near, rocket_far, hp_slot}};

  // Mirror across center field mid-line (short field axis):
  ::std::array<Pose, 16> half_field_targets;
  ::std::copy(quarter_field_targets.begin(), quarter_field_targets.end(),
              half_field_targets.begin());
  for (int ii = 0; ii < 8; ++ii) {
    const int jj = ii + 8;
    half_field_targets[jj] = quarter_field_targets[ii];
    half_field_targets[jj].mutable_pos()->x() =
        2.0 * kCenterFieldX - half_field_targets[jj].rel_pos().x();
    half_field_targets[jj].set_theta(
        aos::math::NormalizeAngle(M_PI - half_field_targets[jj].rel_theta()));
  }

  ::std::array<Pose, 32> target_poses_;

  // Mirror across x-axis (long field axis):
  ::std::copy(half_field_targets.begin(), half_field_targets.end(),
              target_poses_.begin());
  for (int ii = 0; ii < 16; ++ii) {
    const int jj = ii + 16;
    target_poses_[jj] = half_field_targets[ii];
    target_poses_[jj].mutable_pos()->y() *= -1;
    target_poses_[jj].set_theta(-target_poses_[jj].rel_theta());
  }
  for (int ii = 0; ii < 32; ++ii) {
    targets_[ii] = {target_poses_[ii]};
  }

  // Define rocket obstacles as just being a single line that should block any
  // cameras trying to see through the rocket up and down the field.
  // This line is parallel to the driver's station wall and extends behind
  // the portal.
  Obstacle rocket_obstacle({{kRocketPortX, kRocketY, 0.0}, 0.0},
                           {{kRocketPortX, kRocketPortY + 0.01, 0.0}, 0.0});
  // First, we mirror rocket obstacles across x-axis:
  Obstacle rocket_obstacle2({{kRocketPortX, -kRocketY, 0.0}, 0.0},
                            {{kRocketPortX, -kRocketPortY - 0.01, 0.0}, 0.0});

  // Define an obstacle for the Hab that extends striaght out a few feet from
  // the driver's station wall.
  // TODO(james): Does this actually block our view?
  const double kHabL3X = FeetToMeters(4.0);
  Obstacle hab_obstacle({}, {{kHabL3X, 0.0, 0.0}, 0.0});
  ::std::array<Obstacle, 3> half_obstacles{
      {rocket_obstacle, rocket_obstacle2, hab_obstacle}};
  ::std::copy(half_obstacles.begin(), half_obstacles.end(), obstacles_.begin());

  // Next, we mirror across the mid-line (short axis) to duplicate the
  // rockets and hab to opposite side of the field.
  for (int ii = 0; ii < 3; ++ii) {
    const int jj = ii + 3;
    obstacles_[jj] = half_obstacles[ii];
    obstacles_[jj].mutable_pose1()->mutable_pos()->x() =
        2.0 * kCenterFieldX - obstacles_[jj].mutable_pose1()->rel_pos().x();
    obstacles_[jj].mutable_pose2()->mutable_pos()->x() =
        2.0 * kCenterFieldX - obstacles_[jj].mutable_pose2()->rel_pos().x();
  }

  // Finally, define a rectangular cargo ship.
  const double kCargoCornerX = kFaceCargoBayX + 0.1;
  const double kCargoCornerY = kSideCargoBayY - 0.1;
  ::std::array<Pose, 4> cargo_corners{
      {{{kCargoCornerX, kCargoCornerY, 0.0}, 0.0},
       {{kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
       {{2.0 * kCenterFieldX - kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
       {{2.0 * kCenterFieldX - kCargoCornerX, kCargoCornerY, 0.0}, 0.0}}};
  for (int ii = 6; ii < 10; ++ii) {
    obstacles_[ii] = Obstacle(cargo_corners[ii % cargo_corners.size()],
                              cargo_corners[(ii + 1) % cargo_corners.size()]);
  }
}

}  // namespace constants
}  // namespace y2019