Austin Schuh | a273376 | 2015-09-06 17:46:50 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2009-2012 Niels Provos and Nick Mathewson |
| 3 | * |
| 4 | * Redistribution and use in source and binary forms, with or without |
| 5 | * modification, are permitted provided that the following conditions |
| 6 | * are met: |
| 7 | * 1. Redistributions of source code must retain the above copyright |
| 8 | * notice, this list of conditions and the following disclaimer. |
| 9 | * 2. Redistributions in binary form must reproduce the above copyright |
| 10 | * notice, this list of conditions and the following disclaimer in the |
| 11 | * documentation and/or other materials provided with the distribution. |
| 12 | * 3. The name of the author may not be used to endorse or promote products |
| 13 | * derived from this software without specific prior written permission. |
| 14 | * |
| 15 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| 16 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| 17 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| 18 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 19 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 20 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 21 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 22 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 23 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 24 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 25 | */ |
| 26 | |
| 27 | #include <sys/types.h> |
| 28 | |
| 29 | #include "event2/event-config.h" |
| 30 | |
| 31 | #ifdef _EVENT_HAVE_SYS_TIME_H |
| 32 | #include <sys/time.h> |
| 33 | #endif |
| 34 | |
| 35 | #include <errno.h> |
| 36 | #include <stdio.h> |
| 37 | #include <stdlib.h> |
| 38 | #include <string.h> |
| 39 | #ifdef _EVENT_HAVE_STDARG_H |
| 40 | #include <stdarg.h> |
| 41 | #endif |
| 42 | #ifdef _EVENT_HAVE_UNISTD_H |
| 43 | #include <unistd.h> |
| 44 | #endif |
| 45 | |
| 46 | #ifdef WIN32 |
| 47 | #include <winsock2.h> |
| 48 | #endif |
| 49 | |
| 50 | #include "event2/bufferevent.h" |
| 51 | #include "event2/bufferevent_struct.h" |
| 52 | #include "event2/bufferevent_ssl.h" |
| 53 | #include "event2/buffer.h" |
| 54 | #include "event2/event.h" |
| 55 | |
| 56 | #include "mm-internal.h" |
| 57 | #include "bufferevent-internal.h" |
| 58 | #include "log-internal.h" |
| 59 | |
| 60 | #include <openssl/bio.h> |
| 61 | #include <openssl/ssl.h> |
| 62 | #include <openssl/err.h> |
| 63 | |
| 64 | /* |
| 65 | * Define an OpenSSL bio that targets a bufferevent. |
| 66 | */ |
| 67 | |
| 68 | /* -------------------- |
| 69 | A BIO is an OpenSSL abstraction that handles reading and writing data. The |
| 70 | library will happily speak SSL over anything that implements a BIO |
| 71 | interface. |
| 72 | |
| 73 | Here we define a BIO implementation that directs its output to a |
| 74 | bufferevent. We'll want to use this only when none of OpenSSL's built-in |
| 75 | IO mechanisms work for us. |
| 76 | -------------------- */ |
| 77 | |
| 78 | /* every BIO type needs its own integer type value. */ |
| 79 | #define BIO_TYPE_LIBEVENT 57 |
| 80 | /* ???? Arguably, we should set BIO_TYPE_FILTER or BIO_TYPE_SOURCE_SINK on |
| 81 | * this. */ |
| 82 | |
| 83 | #if 0 |
| 84 | static void |
| 85 | print_err(int val) |
| 86 | { |
| 87 | int err; |
| 88 | printf("Error was %d\n", val); |
| 89 | |
| 90 | while ((err = ERR_get_error())) { |
| 91 | const char *msg = (const char*)ERR_reason_error_string(err); |
| 92 | const char *lib = (const char*)ERR_lib_error_string(err); |
| 93 | const char *func = (const char*)ERR_func_error_string(err); |
| 94 | |
| 95 | printf("%s in %s %s\n", msg, lib, func); |
| 96 | } |
| 97 | } |
| 98 | #else |
| 99 | #define print_err(v) ((void)0) |
| 100 | #endif |
| 101 | |
| 102 | /* Called to initialize a new BIO */ |
| 103 | static int |
| 104 | bio_bufferevent_new(BIO *b) |
| 105 | { |
| 106 | b->init = 0; |
| 107 | b->num = -1; |
| 108 | b->ptr = NULL; /* We'll be putting the bufferevent in this field.*/ |
| 109 | b->flags = 0; |
| 110 | return 1; |
| 111 | } |
| 112 | |
| 113 | /* Called to uninitialize the BIO. */ |
| 114 | static int |
| 115 | bio_bufferevent_free(BIO *b) |
| 116 | { |
| 117 | if (!b) |
| 118 | return 0; |
| 119 | if (b->shutdown) { |
| 120 | if (b->init && b->ptr) |
| 121 | bufferevent_free(b->ptr); |
| 122 | b->init = 0; |
| 123 | b->flags = 0; |
| 124 | b->ptr = NULL; |
| 125 | } |
| 126 | return 1; |
| 127 | } |
| 128 | |
| 129 | /* Called to extract data from the BIO. */ |
| 130 | static int |
| 131 | bio_bufferevent_read(BIO *b, char *out, int outlen) |
| 132 | { |
| 133 | int r = 0; |
| 134 | struct evbuffer *input; |
| 135 | |
| 136 | BIO_clear_retry_flags(b); |
| 137 | |
| 138 | if (!out) |
| 139 | return 0; |
| 140 | if (!b->ptr) |
| 141 | return -1; |
| 142 | |
| 143 | input = bufferevent_get_input(b->ptr); |
| 144 | if (evbuffer_get_length(input) == 0) { |
| 145 | /* If there's no data to read, say so. */ |
| 146 | BIO_set_retry_read(b); |
| 147 | return -1; |
| 148 | } else { |
| 149 | r = evbuffer_remove(input, out, outlen); |
| 150 | } |
| 151 | |
| 152 | return r; |
| 153 | } |
| 154 | |
| 155 | /* Called to write data info the BIO */ |
| 156 | static int |
| 157 | bio_bufferevent_write(BIO *b, const char *in, int inlen) |
| 158 | { |
| 159 | struct bufferevent *bufev = b->ptr; |
| 160 | struct evbuffer *output; |
| 161 | size_t outlen; |
| 162 | |
| 163 | BIO_clear_retry_flags(b); |
| 164 | |
| 165 | if (!b->ptr) |
| 166 | return -1; |
| 167 | |
| 168 | output = bufferevent_get_output(bufev); |
| 169 | outlen = evbuffer_get_length(output); |
| 170 | |
| 171 | /* Copy only as much data onto the output buffer as can fit under the |
| 172 | * high-water mark. */ |
| 173 | if (bufev->wm_write.high && bufev->wm_write.high <= (outlen+inlen)) { |
| 174 | if (bufev->wm_write.high <= outlen) { |
| 175 | /* If no data can fit, we'll need to retry later. */ |
| 176 | BIO_set_retry_write(b); |
| 177 | return -1; |
| 178 | } |
| 179 | inlen = bufev->wm_write.high - outlen; |
| 180 | } |
| 181 | |
| 182 | EVUTIL_ASSERT(inlen > 0); |
| 183 | evbuffer_add(output, in, inlen); |
| 184 | return inlen; |
| 185 | } |
| 186 | |
| 187 | /* Called to handle various requests */ |
| 188 | static long |
| 189 | bio_bufferevent_ctrl(BIO *b, int cmd, long num, void *ptr) |
| 190 | { |
| 191 | struct bufferevent *bufev = b->ptr; |
| 192 | long ret = 1; |
| 193 | |
| 194 | switch (cmd) { |
| 195 | case BIO_CTRL_GET_CLOSE: |
| 196 | ret = b->shutdown; |
| 197 | break; |
| 198 | case BIO_CTRL_SET_CLOSE: |
| 199 | b->shutdown = (int)num; |
| 200 | break; |
| 201 | case BIO_CTRL_PENDING: |
| 202 | ret = evbuffer_get_length(bufferevent_get_input(bufev)) != 0; |
| 203 | break; |
| 204 | case BIO_CTRL_WPENDING: |
| 205 | ret = evbuffer_get_length(bufferevent_get_output(bufev)) != 0; |
| 206 | break; |
| 207 | /* XXXX These two are given a special-case treatment because |
| 208 | * of cargo-cultism. I should come up with a better reason. */ |
| 209 | case BIO_CTRL_DUP: |
| 210 | case BIO_CTRL_FLUSH: |
| 211 | ret = 1; |
| 212 | break; |
| 213 | default: |
| 214 | ret = 0; |
| 215 | break; |
| 216 | } |
| 217 | return ret; |
| 218 | } |
| 219 | |
| 220 | /* Called to write a string to the BIO */ |
| 221 | static int |
| 222 | bio_bufferevent_puts(BIO *b, const char *s) |
| 223 | { |
| 224 | return bio_bufferevent_write(b, s, strlen(s)); |
| 225 | } |
| 226 | |
| 227 | /* Method table for the bufferevent BIO */ |
| 228 | static BIO_METHOD methods_bufferevent = { |
| 229 | BIO_TYPE_LIBEVENT, "bufferevent", |
| 230 | bio_bufferevent_write, |
| 231 | bio_bufferevent_read, |
| 232 | bio_bufferevent_puts, |
| 233 | NULL /* bio_bufferevent_gets */, |
| 234 | bio_bufferevent_ctrl, |
| 235 | bio_bufferevent_new, |
| 236 | bio_bufferevent_free, |
| 237 | NULL /* callback_ctrl */, |
| 238 | }; |
| 239 | |
| 240 | /* Return the method table for the bufferevents BIO */ |
| 241 | static BIO_METHOD * |
| 242 | BIO_s_bufferevent(void) |
| 243 | { |
| 244 | return &methods_bufferevent; |
| 245 | } |
| 246 | |
| 247 | /* Create a new BIO to wrap communication around a bufferevent. If close_flag |
| 248 | * is true, the bufferevent will be freed when the BIO is closed. */ |
| 249 | static BIO * |
| 250 | BIO_new_bufferevent(struct bufferevent *bufferevent, int close_flag) |
| 251 | { |
| 252 | BIO *result; |
| 253 | if (!bufferevent) |
| 254 | return NULL; |
| 255 | if (!(result = BIO_new(BIO_s_bufferevent()))) |
| 256 | return NULL; |
| 257 | result->init = 1; |
| 258 | result->ptr = bufferevent; |
| 259 | result->shutdown = close_flag ? 1 : 0; |
| 260 | return result; |
| 261 | } |
| 262 | |
| 263 | /* -------------------- |
| 264 | Now, here's the OpenSSL-based implementation of bufferevent. |
| 265 | |
| 266 | The implementation comes in two flavors: one that connects its SSL object |
| 267 | to an underlying bufferevent using a BIO_bufferevent, and one that has the |
| 268 | SSL object connect to a socket directly. The latter should generally be |
| 269 | faster, except on Windows, where your best bet is using a |
| 270 | bufferevent_async. |
| 271 | |
| 272 | (OpenSSL supports many other BIO types, too. But we can't use any unless |
| 273 | we have a good way to get notified when they become readable/writable.) |
| 274 | -------------------- */ |
| 275 | |
| 276 | struct bio_data_counts { |
| 277 | unsigned long n_written; |
| 278 | unsigned long n_read; |
| 279 | }; |
| 280 | |
| 281 | struct bufferevent_openssl { |
| 282 | /* Shared fields with common bufferevent implementation code. |
| 283 | If we were set up with an underlying bufferevent, we use the |
| 284 | events here as timers only. If we have an SSL, then we use |
| 285 | the events as socket events. |
| 286 | */ |
| 287 | struct bufferevent_private bev; |
| 288 | /* An underlying bufferevent that we're directing our output to. |
| 289 | If it's NULL, then we're connected to an fd, not an evbuffer. */ |
| 290 | struct bufferevent *underlying; |
| 291 | /* The SSL object doing our encryption. */ |
| 292 | SSL *ssl; |
| 293 | |
| 294 | /* A callback that's invoked when data arrives on our outbuf so we |
| 295 | know to write data to the SSL. */ |
| 296 | struct evbuffer_cb_entry *outbuf_cb; |
| 297 | |
| 298 | /* A count of how much data the bios have read/written total. Used |
| 299 | for rate-limiting. */ |
| 300 | struct bio_data_counts counts; |
| 301 | |
| 302 | /* If this value is greater than 0, then the last SSL_write blocked, |
| 303 | * and we need to try it again with this many bytes. */ |
| 304 | ev_ssize_t last_write; |
| 305 | |
| 306 | #define NUM_ERRORS 3 |
| 307 | ev_uint32_t errors[NUM_ERRORS]; |
| 308 | |
| 309 | /* When we next get available space, we should say "read" instead of |
| 310 | "write". This can happen if there's a renegotiation during a read |
| 311 | operation. */ |
| 312 | unsigned read_blocked_on_write : 1; |
| 313 | /* When we next get data, we should say "write" instead of "read". */ |
| 314 | unsigned write_blocked_on_read : 1; |
| 315 | /* XXX */ |
| 316 | unsigned allow_dirty_shutdown : 1; |
| 317 | /* XXXX */ |
| 318 | unsigned fd_is_set : 1; |
| 319 | /* XXX */ |
| 320 | unsigned n_errors : 2; |
| 321 | |
| 322 | /* Are we currently connecting, accepting, or doing IO? */ |
| 323 | unsigned state : 2; |
| 324 | }; |
| 325 | |
| 326 | static int be_openssl_enable(struct bufferevent *, short); |
| 327 | static int be_openssl_disable(struct bufferevent *, short); |
| 328 | static void be_openssl_destruct(struct bufferevent *); |
| 329 | static int be_openssl_adj_timeouts(struct bufferevent *); |
| 330 | static int be_openssl_flush(struct bufferevent *bufev, |
| 331 | short iotype, enum bufferevent_flush_mode mode); |
| 332 | static int be_openssl_ctrl(struct bufferevent *, enum bufferevent_ctrl_op, union bufferevent_ctrl_data *); |
| 333 | |
| 334 | const struct bufferevent_ops bufferevent_ops_openssl = { |
| 335 | "ssl", |
| 336 | evutil_offsetof(struct bufferevent_openssl, bev.bev), |
| 337 | be_openssl_enable, |
| 338 | be_openssl_disable, |
| 339 | be_openssl_destruct, |
| 340 | be_openssl_adj_timeouts, |
| 341 | be_openssl_flush, |
| 342 | be_openssl_ctrl, |
| 343 | }; |
| 344 | |
| 345 | /* Given a bufferevent, return a pointer to the bufferevent_openssl that |
| 346 | * contains it, if any. */ |
| 347 | static inline struct bufferevent_openssl * |
| 348 | upcast(struct bufferevent *bev) |
| 349 | { |
| 350 | struct bufferevent_openssl *bev_o; |
| 351 | if (bev->be_ops != &bufferevent_ops_openssl) |
| 352 | return NULL; |
| 353 | bev_o = (void*)( ((char*)bev) - |
| 354 | evutil_offsetof(struct bufferevent_openssl, bev.bev)); |
| 355 | EVUTIL_ASSERT(bev_o->bev.bev.be_ops == &bufferevent_ops_openssl); |
| 356 | return bev_o; |
| 357 | } |
| 358 | |
| 359 | static inline void |
| 360 | put_error(struct bufferevent_openssl *bev_ssl, unsigned long err) |
| 361 | { |
| 362 | if (bev_ssl->n_errors == NUM_ERRORS) |
| 363 | return; |
| 364 | /* The error type according to openssl is "unsigned long", but |
| 365 | openssl never uses more than 32 bits of it. It _can't_ use more |
| 366 | than 32 bits of it, since it needs to report errors on systems |
| 367 | where long is only 32 bits. |
| 368 | */ |
| 369 | bev_ssl->errors[bev_ssl->n_errors++] = (ev_uint32_t) err; |
| 370 | } |
| 371 | |
| 372 | /* Have the base communications channel (either the underlying bufferevent or |
| 373 | * ev_read and ev_write) start reading. Take the read-blocked-on-write flag |
| 374 | * into account. */ |
| 375 | static int |
| 376 | start_reading(struct bufferevent_openssl *bev_ssl) |
| 377 | { |
| 378 | if (bev_ssl->underlying) { |
| 379 | bufferevent_unsuspend_read(bev_ssl->underlying, |
| 380 | BEV_SUSPEND_FILT_READ); |
| 381 | return 0; |
| 382 | } else { |
| 383 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 384 | int r; |
| 385 | r = _bufferevent_add_event(&bev->ev_read, &bev->timeout_read); |
| 386 | if (r == 0 && bev_ssl->read_blocked_on_write) |
| 387 | r = _bufferevent_add_event(&bev->ev_write, |
| 388 | &bev->timeout_write); |
| 389 | return r; |
| 390 | } |
| 391 | } |
| 392 | |
| 393 | /* Have the base communications channel (either the underlying bufferevent or |
| 394 | * ev_read and ev_write) start writing. Take the write-blocked-on-read flag |
| 395 | * into account. */ |
| 396 | static int |
| 397 | start_writing(struct bufferevent_openssl *bev_ssl) |
| 398 | { |
| 399 | int r = 0; |
| 400 | if (bev_ssl->underlying) { |
| 401 | ; |
| 402 | } else { |
| 403 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 404 | r = _bufferevent_add_event(&bev->ev_write, &bev->timeout_write); |
| 405 | if (!r && bev_ssl->write_blocked_on_read) |
| 406 | r = _bufferevent_add_event(&bev->ev_read, |
| 407 | &bev->timeout_read); |
| 408 | } |
| 409 | return r; |
| 410 | } |
| 411 | |
| 412 | static void |
| 413 | stop_reading(struct bufferevent_openssl *bev_ssl) |
| 414 | { |
| 415 | if (bev_ssl->write_blocked_on_read) |
| 416 | return; |
| 417 | if (bev_ssl->underlying) { |
| 418 | bufferevent_suspend_read(bev_ssl->underlying, |
| 419 | BEV_SUSPEND_FILT_READ); |
| 420 | } else { |
| 421 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 422 | event_del(&bev->ev_read); |
| 423 | } |
| 424 | } |
| 425 | |
| 426 | static void |
| 427 | stop_writing(struct bufferevent_openssl *bev_ssl) |
| 428 | { |
| 429 | if (bev_ssl->read_blocked_on_write) |
| 430 | return; |
| 431 | if (bev_ssl->underlying) { |
| 432 | ; |
| 433 | } else { |
| 434 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 435 | event_del(&bev->ev_write); |
| 436 | } |
| 437 | } |
| 438 | |
| 439 | static int |
| 440 | set_rbow(struct bufferevent_openssl *bev_ssl) |
| 441 | { |
| 442 | if (!bev_ssl->underlying) |
| 443 | stop_reading(bev_ssl); |
| 444 | bev_ssl->read_blocked_on_write = 1; |
| 445 | return start_writing(bev_ssl); |
| 446 | } |
| 447 | |
| 448 | static int |
| 449 | set_wbor(struct bufferevent_openssl *bev_ssl) |
| 450 | { |
| 451 | if (!bev_ssl->underlying) |
| 452 | stop_writing(bev_ssl); |
| 453 | bev_ssl->write_blocked_on_read = 1; |
| 454 | return start_reading(bev_ssl); |
| 455 | } |
| 456 | |
| 457 | static int |
| 458 | clear_rbow(struct bufferevent_openssl *bev_ssl) |
| 459 | { |
| 460 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 461 | int r = 0; |
| 462 | bev_ssl->read_blocked_on_write = 0; |
| 463 | if (!(bev->enabled & EV_WRITE)) |
| 464 | stop_writing(bev_ssl); |
| 465 | if (bev->enabled & EV_READ) |
| 466 | r = start_reading(bev_ssl); |
| 467 | return r; |
| 468 | } |
| 469 | |
| 470 | |
| 471 | static int |
| 472 | clear_wbor(struct bufferevent_openssl *bev_ssl) |
| 473 | { |
| 474 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 475 | int r = 0; |
| 476 | bev_ssl->write_blocked_on_read = 0; |
| 477 | if (!(bev->enabled & EV_READ)) |
| 478 | stop_reading(bev_ssl); |
| 479 | if (bev->enabled & EV_WRITE) |
| 480 | r = start_writing(bev_ssl); |
| 481 | return r; |
| 482 | } |
| 483 | |
| 484 | static void |
| 485 | conn_closed(struct bufferevent_openssl *bev_ssl, int errcode, int ret) |
| 486 | { |
| 487 | int event = BEV_EVENT_ERROR; |
| 488 | int dirty_shutdown = 0; |
| 489 | unsigned long err; |
| 490 | |
| 491 | switch (errcode) { |
| 492 | case SSL_ERROR_ZERO_RETURN: |
| 493 | /* Possibly a clean shutdown. */ |
| 494 | if (SSL_get_shutdown(bev_ssl->ssl) & SSL_RECEIVED_SHUTDOWN) |
| 495 | event = BEV_EVENT_EOF; |
| 496 | else |
| 497 | dirty_shutdown = 1; |
| 498 | break; |
| 499 | case SSL_ERROR_SYSCALL: |
| 500 | /* IO error; possibly a dirty shutdown. */ |
| 501 | if (ret == 0 && ERR_peek_error() == 0) |
| 502 | dirty_shutdown = 1; |
| 503 | break; |
| 504 | case SSL_ERROR_SSL: |
| 505 | /* Protocol error. */ |
| 506 | break; |
| 507 | case SSL_ERROR_WANT_X509_LOOKUP: |
| 508 | /* XXXX handle this. */ |
| 509 | break; |
| 510 | case SSL_ERROR_NONE: |
| 511 | case SSL_ERROR_WANT_READ: |
| 512 | case SSL_ERROR_WANT_WRITE: |
| 513 | case SSL_ERROR_WANT_CONNECT: |
| 514 | case SSL_ERROR_WANT_ACCEPT: |
| 515 | default: |
| 516 | /* should be impossible; treat as normal error. */ |
| 517 | event_warnx("BUG: Unexpected OpenSSL error code %d", errcode); |
| 518 | break; |
| 519 | } |
| 520 | |
| 521 | while ((err = ERR_get_error())) { |
| 522 | put_error(bev_ssl, err); |
| 523 | } |
| 524 | |
| 525 | if (dirty_shutdown && bev_ssl->allow_dirty_shutdown) |
| 526 | event = BEV_EVENT_EOF; |
| 527 | |
| 528 | stop_reading(bev_ssl); |
| 529 | stop_writing(bev_ssl); |
| 530 | |
| 531 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, event); |
| 532 | } |
| 533 | |
| 534 | static void |
| 535 | init_bio_counts(struct bufferevent_openssl *bev_ssl) |
| 536 | { |
| 537 | bev_ssl->counts.n_written = |
| 538 | BIO_number_written(SSL_get_wbio(bev_ssl->ssl)); |
| 539 | bev_ssl->counts.n_read = |
| 540 | BIO_number_read(SSL_get_rbio(bev_ssl->ssl)); |
| 541 | } |
| 542 | |
| 543 | static inline void |
| 544 | decrement_buckets(struct bufferevent_openssl *bev_ssl) |
| 545 | { |
| 546 | unsigned long num_w = BIO_number_written(SSL_get_wbio(bev_ssl->ssl)); |
| 547 | unsigned long num_r = BIO_number_read(SSL_get_rbio(bev_ssl->ssl)); |
| 548 | /* These next two subtractions can wrap around. That's okay. */ |
| 549 | unsigned long w = num_w - bev_ssl->counts.n_written; |
| 550 | unsigned long r = num_r - bev_ssl->counts.n_read; |
| 551 | if (w) |
| 552 | _bufferevent_decrement_write_buckets(&bev_ssl->bev, w); |
| 553 | if (r) |
| 554 | _bufferevent_decrement_read_buckets(&bev_ssl->bev, r); |
| 555 | bev_ssl->counts.n_written = num_w; |
| 556 | bev_ssl->counts.n_read = num_r; |
| 557 | } |
| 558 | |
| 559 | #define OP_MADE_PROGRESS 1 |
| 560 | #define OP_BLOCKED 2 |
| 561 | #define OP_ERR 4 |
| 562 | |
| 563 | /* Return a bitmask of OP_MADE_PROGRESS (if we read anything); OP_BLOCKED (if |
| 564 | we're now blocked); and OP_ERR (if an error occurred). */ |
| 565 | static int |
| 566 | do_read(struct bufferevent_openssl *bev_ssl, int n_to_read) { |
| 567 | /* Requires lock */ |
| 568 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 569 | struct evbuffer *input = bev->input; |
| 570 | int r, n, i, n_used = 0, atmost; |
| 571 | struct evbuffer_iovec space[2]; |
| 572 | int result = 0; |
| 573 | |
| 574 | if (bev_ssl->bev.read_suspended) |
| 575 | return 0; |
| 576 | |
| 577 | atmost = _bufferevent_get_read_max(&bev_ssl->bev); |
| 578 | if (n_to_read > atmost) |
| 579 | n_to_read = atmost; |
| 580 | |
| 581 | n = evbuffer_reserve_space(input, n_to_read, space, 2); |
| 582 | if (n < 0) |
| 583 | return OP_ERR; |
| 584 | |
| 585 | for (i=0; i<n; ++i) { |
| 586 | if (bev_ssl->bev.read_suspended) |
| 587 | break; |
| 588 | r = SSL_read(bev_ssl->ssl, space[i].iov_base, space[i].iov_len); |
| 589 | if (r>0) { |
| 590 | result |= OP_MADE_PROGRESS; |
| 591 | if (bev_ssl->read_blocked_on_write) |
| 592 | if (clear_rbow(bev_ssl) < 0) |
| 593 | return OP_ERR | result; |
| 594 | ++n_used; |
| 595 | space[i].iov_len = r; |
| 596 | decrement_buckets(bev_ssl); |
| 597 | } else { |
| 598 | int err = SSL_get_error(bev_ssl->ssl, r); |
| 599 | print_err(err); |
| 600 | switch (err) { |
| 601 | case SSL_ERROR_WANT_READ: |
| 602 | /* Can't read until underlying has more data. */ |
| 603 | if (bev_ssl->read_blocked_on_write) |
| 604 | if (clear_rbow(bev_ssl) < 0) |
| 605 | return OP_ERR | result; |
| 606 | break; |
| 607 | case SSL_ERROR_WANT_WRITE: |
| 608 | /* This read operation requires a write, and the |
| 609 | * underlying is full */ |
| 610 | if (!bev_ssl->read_blocked_on_write) |
| 611 | if (set_rbow(bev_ssl) < 0) |
| 612 | return OP_ERR | result; |
| 613 | break; |
| 614 | default: |
| 615 | conn_closed(bev_ssl, err, r); |
| 616 | break; |
| 617 | } |
| 618 | result |= OP_BLOCKED; |
| 619 | break; /* out of the loop */ |
| 620 | } |
| 621 | } |
| 622 | |
| 623 | if (n_used) { |
| 624 | evbuffer_commit_space(input, space, n_used); |
| 625 | if (bev_ssl->underlying) |
| 626 | BEV_RESET_GENERIC_READ_TIMEOUT(bev); |
| 627 | } |
| 628 | |
| 629 | return result; |
| 630 | } |
| 631 | |
| 632 | /* Return a bitmask of OP_MADE_PROGRESS (if we wrote anything); OP_BLOCKED (if |
| 633 | we're now blocked); and OP_ERR (if an error occurred). */ |
| 634 | static int |
| 635 | do_write(struct bufferevent_openssl *bev_ssl, int atmost) |
| 636 | { |
| 637 | int i, r, n, n_written = 0; |
| 638 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 639 | struct evbuffer *output = bev->output; |
| 640 | struct evbuffer_iovec space[8]; |
| 641 | int result = 0; |
| 642 | |
| 643 | if (bev_ssl->last_write > 0) |
| 644 | atmost = bev_ssl->last_write; |
| 645 | else |
| 646 | atmost = _bufferevent_get_write_max(&bev_ssl->bev); |
| 647 | |
| 648 | n = evbuffer_peek(output, atmost, NULL, space, 8); |
| 649 | if (n < 0) |
| 650 | return OP_ERR | result; |
| 651 | |
| 652 | if (n > 8) |
| 653 | n = 8; |
| 654 | for (i=0; i < n; ++i) { |
| 655 | if (bev_ssl->bev.write_suspended) |
| 656 | break; |
| 657 | |
| 658 | /* SSL_write will (reasonably) return 0 if we tell it to |
| 659 | send 0 data. Skip this case so we don't interpret the |
| 660 | result as an error */ |
| 661 | if (space[i].iov_len == 0) |
| 662 | continue; |
| 663 | |
| 664 | r = SSL_write(bev_ssl->ssl, space[i].iov_base, |
| 665 | space[i].iov_len); |
| 666 | if (r > 0) { |
| 667 | result |= OP_MADE_PROGRESS; |
| 668 | if (bev_ssl->write_blocked_on_read) |
| 669 | if (clear_wbor(bev_ssl) < 0) |
| 670 | return OP_ERR | result; |
| 671 | n_written += r; |
| 672 | bev_ssl->last_write = -1; |
| 673 | decrement_buckets(bev_ssl); |
| 674 | } else { |
| 675 | int err = SSL_get_error(bev_ssl->ssl, r); |
| 676 | print_err(err); |
| 677 | switch (err) { |
| 678 | case SSL_ERROR_WANT_WRITE: |
| 679 | /* Can't read until underlying has more data. */ |
| 680 | if (bev_ssl->write_blocked_on_read) |
| 681 | if (clear_wbor(bev_ssl) < 0) |
| 682 | return OP_ERR | result; |
| 683 | bev_ssl->last_write = space[i].iov_len; |
| 684 | break; |
| 685 | case SSL_ERROR_WANT_READ: |
| 686 | /* This read operation requires a write, and the |
| 687 | * underlying is full */ |
| 688 | if (!bev_ssl->write_blocked_on_read) |
| 689 | if (set_wbor(bev_ssl) < 0) |
| 690 | return OP_ERR | result; |
| 691 | bev_ssl->last_write = space[i].iov_len; |
| 692 | break; |
| 693 | default: |
| 694 | conn_closed(bev_ssl, err, r); |
| 695 | bev_ssl->last_write = -1; |
| 696 | break; |
| 697 | } |
| 698 | result |= OP_BLOCKED; |
| 699 | break; |
| 700 | } |
| 701 | } |
| 702 | if (n_written) { |
| 703 | evbuffer_drain(output, n_written); |
| 704 | if (bev_ssl->underlying) |
| 705 | BEV_RESET_GENERIC_WRITE_TIMEOUT(bev); |
| 706 | |
| 707 | if (evbuffer_get_length(output) <= bev->wm_write.low) |
| 708 | _bufferevent_run_writecb(bev); |
| 709 | } |
| 710 | return result; |
| 711 | } |
| 712 | |
| 713 | #define WRITE_FRAME 15000 |
| 714 | |
| 715 | #define READ_DEFAULT 4096 |
| 716 | |
| 717 | /* Try to figure out how many bytes to read; return 0 if we shouldn't be |
| 718 | * reading. */ |
| 719 | static int |
| 720 | bytes_to_read(struct bufferevent_openssl *bev) |
| 721 | { |
| 722 | struct evbuffer *input = bev->bev.bev.input; |
| 723 | struct event_watermark *wm = &bev->bev.bev.wm_read; |
| 724 | int result = READ_DEFAULT; |
| 725 | ev_ssize_t limit; |
| 726 | /* XXX 99% of this is generic code that nearly all bufferevents will |
| 727 | * want. */ |
| 728 | |
| 729 | if (bev->write_blocked_on_read) { |
| 730 | return 0; |
| 731 | } |
| 732 | |
| 733 | if (! (bev->bev.bev.enabled & EV_READ)) { |
| 734 | return 0; |
| 735 | } |
| 736 | |
| 737 | if (bev->bev.read_suspended) { |
| 738 | return 0; |
| 739 | } |
| 740 | |
| 741 | if (wm->high) { |
| 742 | if (evbuffer_get_length(input) >= wm->high) { |
| 743 | return 0; |
| 744 | } |
| 745 | |
| 746 | result = wm->high - evbuffer_get_length(input); |
| 747 | } else { |
| 748 | result = READ_DEFAULT; |
| 749 | } |
| 750 | |
| 751 | /* Respect the rate limit */ |
| 752 | limit = _bufferevent_get_read_max(&bev->bev); |
| 753 | if (result > limit) { |
| 754 | result = limit; |
| 755 | } |
| 756 | |
| 757 | return result; |
| 758 | } |
| 759 | |
| 760 | |
| 761 | /* Things look readable. If write is blocked on read, write till it isn't. |
| 762 | * Read from the underlying buffer until we block or we hit our high-water |
| 763 | * mark. |
| 764 | */ |
| 765 | static void |
| 766 | consider_reading(struct bufferevent_openssl *bev_ssl) |
| 767 | { |
| 768 | int r; |
| 769 | int n_to_read; |
| 770 | int all_result_flags = 0; |
| 771 | |
| 772 | while (bev_ssl->write_blocked_on_read) { |
| 773 | r = do_write(bev_ssl, WRITE_FRAME); |
| 774 | if (r & (OP_BLOCKED|OP_ERR)) |
| 775 | break; |
| 776 | } |
| 777 | if (bev_ssl->write_blocked_on_read) |
| 778 | return; |
| 779 | |
| 780 | n_to_read = bytes_to_read(bev_ssl); |
| 781 | |
| 782 | while (n_to_read) { |
| 783 | r = do_read(bev_ssl, n_to_read); |
| 784 | all_result_flags |= r; |
| 785 | |
| 786 | if (r & (OP_BLOCKED|OP_ERR)) |
| 787 | break; |
| 788 | |
| 789 | if (bev_ssl->bev.read_suspended) |
| 790 | break; |
| 791 | |
| 792 | /* Read all pending data. This won't hit the network |
| 793 | * again, and will (most importantly) put us in a state |
| 794 | * where we don't need to read anything else until the |
| 795 | * socket is readable again. It'll potentially make us |
| 796 | * overrun our read high-watermark (somewhat |
| 797 | * regrettable). The damage to the rate-limit has |
| 798 | * already been done, since OpenSSL went and read a |
| 799 | * whole SSL record anyway. */ |
| 800 | n_to_read = SSL_pending(bev_ssl->ssl); |
| 801 | |
| 802 | /* XXX This if statement is actually a bad bug, added to avoid |
| 803 | * XXX a worse bug. |
| 804 | * |
| 805 | * The bad bug: It can potentially cause resource unfairness |
| 806 | * by reading too much data from the underlying bufferevent; |
| 807 | * it can potentially cause read looping if the underlying |
| 808 | * bufferevent is a bufferevent_pair and deferred callbacks |
| 809 | * aren't used. |
| 810 | * |
| 811 | * The worse bug: If we didn't do this, then we would |
| 812 | * potentially not read any more from bev_ssl->underlying |
| 813 | * until more data arrived there, which could lead to us |
| 814 | * waiting forever. |
| 815 | */ |
| 816 | if (!n_to_read && bev_ssl->underlying) |
| 817 | n_to_read = bytes_to_read(bev_ssl); |
| 818 | } |
| 819 | |
| 820 | if (all_result_flags & OP_MADE_PROGRESS) { |
| 821 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 822 | struct evbuffer *input = bev->input; |
| 823 | |
| 824 | if (evbuffer_get_length(input) >= bev->wm_read.low) { |
| 825 | _bufferevent_run_readcb(bev); |
| 826 | } |
| 827 | } |
| 828 | |
| 829 | if (!bev_ssl->underlying) { |
| 830 | /* Should be redundant, but let's avoid busy-looping */ |
| 831 | if (bev_ssl->bev.read_suspended || |
| 832 | !(bev_ssl->bev.bev.enabled & EV_READ)) { |
| 833 | event_del(&bev_ssl->bev.bev.ev_read); |
| 834 | } |
| 835 | } |
| 836 | } |
| 837 | |
| 838 | static void |
| 839 | consider_writing(struct bufferevent_openssl *bev_ssl) |
| 840 | { |
| 841 | int r; |
| 842 | struct evbuffer *output = bev_ssl->bev.bev.output; |
| 843 | struct evbuffer *target = NULL; |
| 844 | struct event_watermark *wm = NULL; |
| 845 | |
| 846 | while (bev_ssl->read_blocked_on_write) { |
| 847 | r = do_read(bev_ssl, 1024); /* XXXX 1024 is a hack */ |
| 848 | if (r & OP_MADE_PROGRESS) { |
| 849 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 850 | struct evbuffer *input = bev->input; |
| 851 | |
| 852 | if (evbuffer_get_length(input) >= bev->wm_read.low) { |
| 853 | _bufferevent_run_readcb(bev); |
| 854 | } |
| 855 | } |
| 856 | if (r & (OP_ERR|OP_BLOCKED)) |
| 857 | break; |
| 858 | } |
| 859 | if (bev_ssl->read_blocked_on_write) |
| 860 | return; |
| 861 | if (bev_ssl->underlying) { |
| 862 | target = bev_ssl->underlying->output; |
| 863 | wm = &bev_ssl->underlying->wm_write; |
| 864 | } |
| 865 | while ((bev_ssl->bev.bev.enabled & EV_WRITE) && |
| 866 | (! bev_ssl->bev.write_suspended) && |
| 867 | evbuffer_get_length(output) && |
| 868 | (!target || (! wm->high || evbuffer_get_length(target) < wm->high))) { |
| 869 | int n_to_write; |
| 870 | if (wm && wm->high) |
| 871 | n_to_write = wm->high - evbuffer_get_length(target); |
| 872 | else |
| 873 | n_to_write = WRITE_FRAME; |
| 874 | r = do_write(bev_ssl, n_to_write); |
| 875 | if (r & (OP_BLOCKED|OP_ERR)) |
| 876 | break; |
| 877 | } |
| 878 | |
| 879 | if (!bev_ssl->underlying) { |
| 880 | if (evbuffer_get_length(output) == 0) { |
| 881 | event_del(&bev_ssl->bev.bev.ev_write); |
| 882 | } else if (bev_ssl->bev.write_suspended || |
| 883 | !(bev_ssl->bev.bev.enabled & EV_WRITE)) { |
| 884 | /* Should be redundant, but let's avoid busy-looping */ |
| 885 | event_del(&bev_ssl->bev.bev.ev_write); |
| 886 | } |
| 887 | } |
| 888 | } |
| 889 | |
| 890 | static void |
| 891 | be_openssl_readcb(struct bufferevent *bev_base, void *ctx) |
| 892 | { |
| 893 | struct bufferevent_openssl *bev_ssl = ctx; |
| 894 | consider_reading(bev_ssl); |
| 895 | } |
| 896 | |
| 897 | static void |
| 898 | be_openssl_writecb(struct bufferevent *bev_base, void *ctx) |
| 899 | { |
| 900 | struct bufferevent_openssl *bev_ssl = ctx; |
| 901 | consider_writing(bev_ssl); |
| 902 | } |
| 903 | |
| 904 | static void |
| 905 | be_openssl_eventcb(struct bufferevent *bev_base, short what, void *ctx) |
| 906 | { |
| 907 | struct bufferevent_openssl *bev_ssl = ctx; |
| 908 | int event = 0; |
| 909 | |
| 910 | if (what & BEV_EVENT_EOF) { |
| 911 | if (bev_ssl->allow_dirty_shutdown) |
| 912 | event = BEV_EVENT_EOF; |
| 913 | else |
| 914 | event = BEV_EVENT_ERROR; |
| 915 | } else if (what & BEV_EVENT_TIMEOUT) { |
| 916 | /* We sure didn't set this. Propagate it to the user. */ |
| 917 | event = what; |
| 918 | } else if (what & BEV_EVENT_ERROR) { |
| 919 | /* An error occurred on the connection. Propagate it to the user. */ |
| 920 | event = what; |
| 921 | } else if (what & BEV_EVENT_CONNECTED) { |
| 922 | /* Ignore it. We're saying SSL_connect() already, which will |
| 923 | eat it. */ |
| 924 | } |
| 925 | if (event) |
| 926 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, event); |
| 927 | } |
| 928 | |
| 929 | static void |
| 930 | be_openssl_readeventcb(evutil_socket_t fd, short what, void *ptr) |
| 931 | { |
| 932 | struct bufferevent_openssl *bev_ssl = ptr; |
| 933 | _bufferevent_incref_and_lock(&bev_ssl->bev.bev); |
| 934 | if (what == EV_TIMEOUT) { |
| 935 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, |
| 936 | BEV_EVENT_TIMEOUT|BEV_EVENT_READING); |
| 937 | } else { |
| 938 | consider_reading(bev_ssl); |
| 939 | } |
| 940 | _bufferevent_decref_and_unlock(&bev_ssl->bev.bev); |
| 941 | } |
| 942 | |
| 943 | static void |
| 944 | be_openssl_writeeventcb(evutil_socket_t fd, short what, void *ptr) |
| 945 | { |
| 946 | struct bufferevent_openssl *bev_ssl = ptr; |
| 947 | _bufferevent_incref_and_lock(&bev_ssl->bev.bev); |
| 948 | if (what == EV_TIMEOUT) { |
| 949 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, |
| 950 | BEV_EVENT_TIMEOUT|BEV_EVENT_WRITING); |
| 951 | } else { |
| 952 | consider_writing(bev_ssl); |
| 953 | } |
| 954 | _bufferevent_decref_and_unlock(&bev_ssl->bev.bev); |
| 955 | } |
| 956 | |
| 957 | static int |
| 958 | set_open_callbacks(struct bufferevent_openssl *bev_ssl, evutil_socket_t fd) |
| 959 | { |
| 960 | if (bev_ssl->underlying) { |
| 961 | bufferevent_setcb(bev_ssl->underlying, |
| 962 | be_openssl_readcb, be_openssl_writecb, be_openssl_eventcb, |
| 963 | bev_ssl); |
| 964 | return 0; |
| 965 | } else { |
| 966 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 967 | int rpending=0, wpending=0, r1=0, r2=0; |
| 968 | if (fd < 0 && bev_ssl->fd_is_set) |
| 969 | fd = event_get_fd(&bev->ev_read); |
| 970 | if (bev_ssl->fd_is_set) { |
| 971 | rpending = event_pending(&bev->ev_read, EV_READ, NULL); |
| 972 | wpending = event_pending(&bev->ev_write, EV_WRITE, NULL); |
| 973 | event_del(&bev->ev_read); |
| 974 | event_del(&bev->ev_write); |
| 975 | } |
| 976 | event_assign(&bev->ev_read, bev->ev_base, fd, |
| 977 | EV_READ|EV_PERSIST, be_openssl_readeventcb, bev_ssl); |
| 978 | event_assign(&bev->ev_write, bev->ev_base, fd, |
| 979 | EV_WRITE|EV_PERSIST, be_openssl_writeeventcb, bev_ssl); |
| 980 | if (rpending) |
| 981 | r1 = _bufferevent_add_event(&bev->ev_read, &bev->timeout_read); |
| 982 | if (wpending) |
| 983 | r2 = _bufferevent_add_event(&bev->ev_write, &bev->timeout_write); |
| 984 | if (fd >= 0) { |
| 985 | bev_ssl->fd_is_set = 1; |
| 986 | } |
| 987 | return (r1<0 || r2<0) ? -1 : 0; |
| 988 | } |
| 989 | } |
| 990 | |
| 991 | static int |
| 992 | do_handshake(struct bufferevent_openssl *bev_ssl) |
| 993 | { |
| 994 | int r; |
| 995 | |
| 996 | switch (bev_ssl->state) { |
| 997 | default: |
| 998 | case BUFFEREVENT_SSL_OPEN: |
| 999 | EVUTIL_ASSERT(0); |
| 1000 | return -1; |
| 1001 | case BUFFEREVENT_SSL_CONNECTING: |
| 1002 | case BUFFEREVENT_SSL_ACCEPTING: |
| 1003 | r = SSL_do_handshake(bev_ssl->ssl); |
| 1004 | break; |
| 1005 | } |
| 1006 | decrement_buckets(bev_ssl); |
| 1007 | |
| 1008 | if (r==1) { |
| 1009 | /* We're done! */ |
| 1010 | bev_ssl->state = BUFFEREVENT_SSL_OPEN; |
| 1011 | set_open_callbacks(bev_ssl, -1); /* XXXX handle failure */ |
| 1012 | /* Call do_read and do_write as needed */ |
| 1013 | bufferevent_enable(&bev_ssl->bev.bev, bev_ssl->bev.bev.enabled); |
| 1014 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, |
| 1015 | BEV_EVENT_CONNECTED); |
| 1016 | return 1; |
| 1017 | } else { |
| 1018 | int err = SSL_get_error(bev_ssl->ssl, r); |
| 1019 | print_err(err); |
| 1020 | switch (err) { |
| 1021 | case SSL_ERROR_WANT_WRITE: |
| 1022 | if (!bev_ssl->underlying) { |
| 1023 | stop_reading(bev_ssl); |
| 1024 | return start_writing(bev_ssl); |
| 1025 | } |
| 1026 | return 0; |
| 1027 | case SSL_ERROR_WANT_READ: |
| 1028 | if (!bev_ssl->underlying) { |
| 1029 | stop_writing(bev_ssl); |
| 1030 | return start_reading(bev_ssl); |
| 1031 | } |
| 1032 | return 0; |
| 1033 | default: |
| 1034 | conn_closed(bev_ssl, err, r); |
| 1035 | return -1; |
| 1036 | } |
| 1037 | } |
| 1038 | } |
| 1039 | |
| 1040 | static void |
| 1041 | be_openssl_handshakecb(struct bufferevent *bev_base, void *ctx) |
| 1042 | { |
| 1043 | struct bufferevent_openssl *bev_ssl = ctx; |
| 1044 | do_handshake(bev_ssl);/* XXX handle failure */ |
| 1045 | } |
| 1046 | |
| 1047 | static void |
| 1048 | be_openssl_handshakeeventcb(evutil_socket_t fd, short what, void *ptr) |
| 1049 | { |
| 1050 | struct bufferevent_openssl *bev_ssl = ptr; |
| 1051 | |
| 1052 | _bufferevent_incref_and_lock(&bev_ssl->bev.bev); |
| 1053 | if (what & EV_TIMEOUT) { |
| 1054 | _bufferevent_run_eventcb(&bev_ssl->bev.bev, BEV_EVENT_TIMEOUT); |
| 1055 | } else |
| 1056 | do_handshake(bev_ssl);/* XXX handle failure */ |
| 1057 | _bufferevent_decref_and_unlock(&bev_ssl->bev.bev); |
| 1058 | } |
| 1059 | |
| 1060 | static int |
| 1061 | set_handshake_callbacks(struct bufferevent_openssl *bev_ssl, evutil_socket_t fd) |
| 1062 | { |
| 1063 | if (bev_ssl->underlying) { |
| 1064 | bufferevent_setcb(bev_ssl->underlying, |
| 1065 | be_openssl_handshakecb, be_openssl_handshakecb, |
| 1066 | be_openssl_eventcb, |
| 1067 | bev_ssl); |
| 1068 | return do_handshake(bev_ssl); |
| 1069 | } else { |
| 1070 | struct bufferevent *bev = &bev_ssl->bev.bev; |
| 1071 | int r1=0, r2=0; |
| 1072 | if (fd < 0 && bev_ssl->fd_is_set) |
| 1073 | fd = event_get_fd(&bev->ev_read); |
| 1074 | if (bev_ssl->fd_is_set) { |
| 1075 | event_del(&bev->ev_read); |
| 1076 | event_del(&bev->ev_write); |
| 1077 | } |
| 1078 | event_assign(&bev->ev_read, bev->ev_base, fd, |
| 1079 | EV_READ|EV_PERSIST, be_openssl_handshakeeventcb, bev_ssl); |
| 1080 | event_assign(&bev->ev_write, bev->ev_base, fd, |
| 1081 | EV_WRITE|EV_PERSIST, be_openssl_handshakeeventcb, bev_ssl); |
| 1082 | if (fd >= 0) { |
| 1083 | r1 = _bufferevent_add_event(&bev->ev_read, &bev->timeout_read); |
| 1084 | r2 = _bufferevent_add_event(&bev->ev_write, &bev->timeout_write); |
| 1085 | bev_ssl->fd_is_set = 1; |
| 1086 | } |
| 1087 | return (r1<0 || r2<0) ? -1 : 0; |
| 1088 | } |
| 1089 | } |
| 1090 | |
| 1091 | int |
| 1092 | bufferevent_ssl_renegotiate(struct bufferevent *bev) |
| 1093 | { |
| 1094 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1095 | if (!bev_ssl) |
| 1096 | return -1; |
| 1097 | if (SSL_renegotiate(bev_ssl->ssl) < 0) |
| 1098 | return -1; |
| 1099 | bev_ssl->state = BUFFEREVENT_SSL_CONNECTING; |
| 1100 | if (set_handshake_callbacks(bev_ssl, -1) < 0) |
| 1101 | return -1; |
| 1102 | if (!bev_ssl->underlying) |
| 1103 | return do_handshake(bev_ssl); |
| 1104 | return 0; |
| 1105 | } |
| 1106 | |
| 1107 | static void |
| 1108 | be_openssl_outbuf_cb(struct evbuffer *buf, |
| 1109 | const struct evbuffer_cb_info *cbinfo, void *arg) |
| 1110 | { |
| 1111 | struct bufferevent_openssl *bev_ssl = arg; |
| 1112 | int r = 0; |
| 1113 | /* XXX need to hold a reference here. */ |
| 1114 | |
| 1115 | if (cbinfo->n_added && bev_ssl->state == BUFFEREVENT_SSL_OPEN) { |
| 1116 | if (cbinfo->orig_size == 0) |
| 1117 | r = _bufferevent_add_event(&bev_ssl->bev.bev.ev_write, |
| 1118 | &bev_ssl->bev.bev.timeout_write); |
| 1119 | consider_writing(bev_ssl); |
| 1120 | } |
| 1121 | /* XXX Handle r < 0 */ |
| 1122 | (void)r; |
| 1123 | } |
| 1124 | |
| 1125 | |
| 1126 | static int |
| 1127 | be_openssl_enable(struct bufferevent *bev, short events) |
| 1128 | { |
| 1129 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1130 | int r1 = 0, r2 = 0; |
| 1131 | |
| 1132 | if (bev_ssl->state != BUFFEREVENT_SSL_OPEN) |
| 1133 | return 0; |
| 1134 | |
| 1135 | if (events & EV_READ) |
| 1136 | r1 = start_reading(bev_ssl); |
| 1137 | if (events & EV_WRITE) |
| 1138 | r2 = start_writing(bev_ssl); |
| 1139 | |
| 1140 | if (bev_ssl->underlying) { |
| 1141 | if (events & EV_READ) |
| 1142 | BEV_RESET_GENERIC_READ_TIMEOUT(bev); |
| 1143 | if (events & EV_WRITE) |
| 1144 | BEV_RESET_GENERIC_WRITE_TIMEOUT(bev); |
| 1145 | |
| 1146 | if (events & EV_READ) |
| 1147 | consider_reading(bev_ssl); |
| 1148 | if (events & EV_WRITE) |
| 1149 | consider_writing(bev_ssl); |
| 1150 | } |
| 1151 | return (r1 < 0 || r2 < 0) ? -1 : 0; |
| 1152 | } |
| 1153 | |
| 1154 | static int |
| 1155 | be_openssl_disable(struct bufferevent *bev, short events) |
| 1156 | { |
| 1157 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1158 | if (bev_ssl->state != BUFFEREVENT_SSL_OPEN) |
| 1159 | return 0; |
| 1160 | |
| 1161 | if (events & EV_READ) |
| 1162 | stop_reading(bev_ssl); |
| 1163 | if (events & EV_WRITE) |
| 1164 | stop_writing(bev_ssl); |
| 1165 | |
| 1166 | if (bev_ssl->underlying) { |
| 1167 | if (events & EV_READ) |
| 1168 | BEV_DEL_GENERIC_READ_TIMEOUT(bev); |
| 1169 | if (events & EV_WRITE) |
| 1170 | BEV_DEL_GENERIC_WRITE_TIMEOUT(bev); |
| 1171 | } |
| 1172 | return 0; |
| 1173 | } |
| 1174 | |
| 1175 | static void |
| 1176 | be_openssl_destruct(struct bufferevent *bev) |
| 1177 | { |
| 1178 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1179 | |
| 1180 | if (bev_ssl->underlying) { |
| 1181 | _bufferevent_del_generic_timeout_cbs(bev); |
| 1182 | } else { |
| 1183 | event_del(&bev->ev_read); |
| 1184 | event_del(&bev->ev_write); |
| 1185 | } |
| 1186 | |
| 1187 | if (bev_ssl->bev.options & BEV_OPT_CLOSE_ON_FREE) { |
| 1188 | if (bev_ssl->underlying) { |
| 1189 | if (BEV_UPCAST(bev_ssl->underlying)->refcnt < 2) { |
| 1190 | event_warnx("BEV_OPT_CLOSE_ON_FREE set on an " |
| 1191 | "bufferevent with too few references"); |
| 1192 | } else { |
| 1193 | bufferevent_free(bev_ssl->underlying); |
| 1194 | bev_ssl->underlying = NULL; |
| 1195 | } |
| 1196 | } else { |
| 1197 | evutil_socket_t fd = -1; |
| 1198 | BIO *bio = SSL_get_wbio(bev_ssl->ssl); |
| 1199 | if (bio) |
| 1200 | fd = BIO_get_fd(bio, NULL); |
| 1201 | if (fd >= 0) |
| 1202 | evutil_closesocket(fd); |
| 1203 | } |
| 1204 | SSL_free(bev_ssl->ssl); |
| 1205 | } else { |
| 1206 | if (bev_ssl->underlying) { |
| 1207 | if (bev_ssl->underlying->errorcb == be_openssl_eventcb) |
| 1208 | bufferevent_setcb(bev_ssl->underlying, |
| 1209 | NULL,NULL,NULL,NULL); |
| 1210 | bufferevent_unsuspend_read(bev_ssl->underlying, |
| 1211 | BEV_SUSPEND_FILT_READ); |
| 1212 | } |
| 1213 | } |
| 1214 | } |
| 1215 | |
| 1216 | static int |
| 1217 | be_openssl_adj_timeouts(struct bufferevent *bev) |
| 1218 | { |
| 1219 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1220 | |
| 1221 | if (bev_ssl->underlying) |
| 1222 | return _bufferevent_generic_adj_timeouts(bev); |
| 1223 | else { |
| 1224 | int r1=0, r2=0; |
| 1225 | if (event_pending(&bev->ev_read, EV_READ, NULL)) |
| 1226 | r1 = _bufferevent_add_event(&bev->ev_read, &bev->timeout_read); |
| 1227 | if (event_pending(&bev->ev_write, EV_WRITE, NULL)) |
| 1228 | r2 = _bufferevent_add_event(&bev->ev_write, &bev->timeout_write); |
| 1229 | return (r1<0 || r2<0) ? -1 : 0; |
| 1230 | } |
| 1231 | } |
| 1232 | |
| 1233 | static int |
| 1234 | be_openssl_flush(struct bufferevent *bufev, |
| 1235 | short iotype, enum bufferevent_flush_mode mode) |
| 1236 | { |
| 1237 | /* XXXX Implement this. */ |
| 1238 | return 0; |
| 1239 | } |
| 1240 | |
| 1241 | static int |
| 1242 | be_openssl_ctrl(struct bufferevent *bev, |
| 1243 | enum bufferevent_ctrl_op op, union bufferevent_ctrl_data *data) |
| 1244 | { |
| 1245 | struct bufferevent_openssl *bev_ssl = upcast(bev); |
| 1246 | switch (op) { |
| 1247 | case BEV_CTRL_SET_FD: |
| 1248 | if (bev_ssl->underlying) |
| 1249 | return -1; |
| 1250 | { |
| 1251 | BIO *bio; |
| 1252 | bio = BIO_new_socket(data->fd, 0); |
| 1253 | SSL_set_bio(bev_ssl->ssl, bio, bio); |
| 1254 | bev_ssl->fd_is_set = 1; |
| 1255 | } |
| 1256 | if (bev_ssl->state == BUFFEREVENT_SSL_OPEN) |
| 1257 | return set_open_callbacks(bev_ssl, data->fd); |
| 1258 | else { |
| 1259 | return set_handshake_callbacks(bev_ssl, data->fd); |
| 1260 | } |
| 1261 | case BEV_CTRL_GET_FD: |
| 1262 | if (bev_ssl->underlying) |
| 1263 | return -1; |
| 1264 | if (!bev_ssl->fd_is_set) |
| 1265 | return -1; |
| 1266 | data->fd = event_get_fd(&bev->ev_read); |
| 1267 | return 0; |
| 1268 | case BEV_CTRL_GET_UNDERLYING: |
| 1269 | if (!bev_ssl->underlying) |
| 1270 | return -1; |
| 1271 | data->ptr = bev_ssl->underlying; |
| 1272 | return 0; |
| 1273 | case BEV_CTRL_CANCEL_ALL: |
| 1274 | default: |
| 1275 | return -1; |
| 1276 | } |
| 1277 | } |
| 1278 | |
| 1279 | SSL * |
| 1280 | bufferevent_openssl_get_ssl(struct bufferevent *bufev) |
| 1281 | { |
| 1282 | struct bufferevent_openssl *bev_ssl = upcast(bufev); |
| 1283 | if (!bev_ssl) |
| 1284 | return NULL; |
| 1285 | return bev_ssl->ssl; |
| 1286 | } |
| 1287 | |
| 1288 | static struct bufferevent * |
| 1289 | bufferevent_openssl_new_impl(struct event_base *base, |
| 1290 | struct bufferevent *underlying, |
| 1291 | evutil_socket_t fd, |
| 1292 | SSL *ssl, |
| 1293 | enum bufferevent_ssl_state state, |
| 1294 | int options) |
| 1295 | { |
| 1296 | struct bufferevent_openssl *bev_ssl = NULL; |
| 1297 | struct bufferevent_private *bev_p = NULL; |
| 1298 | int tmp_options = options & ~BEV_OPT_THREADSAFE; |
| 1299 | |
| 1300 | if (underlying != NULL && fd >= 0) |
| 1301 | return NULL; /* Only one can be set. */ |
| 1302 | |
| 1303 | if (!(bev_ssl = mm_calloc(1, sizeof(struct bufferevent_openssl)))) |
| 1304 | goto err; |
| 1305 | |
| 1306 | bev_p = &bev_ssl->bev; |
| 1307 | |
| 1308 | if (bufferevent_init_common(bev_p, base, |
| 1309 | &bufferevent_ops_openssl, tmp_options) < 0) |
| 1310 | goto err; |
| 1311 | |
| 1312 | /* Don't explode if we decide to realloc a chunk we're writing from in |
| 1313 | * the output buffer. */ |
| 1314 | SSL_set_mode(ssl, SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER); |
| 1315 | |
| 1316 | bev_ssl->underlying = underlying; |
| 1317 | bev_ssl->ssl = ssl; |
| 1318 | |
| 1319 | bev_ssl->outbuf_cb = evbuffer_add_cb(bev_p->bev.output, |
| 1320 | be_openssl_outbuf_cb, bev_ssl); |
| 1321 | |
| 1322 | if (options & BEV_OPT_THREADSAFE) |
| 1323 | bufferevent_enable_locking(&bev_ssl->bev.bev, NULL); |
| 1324 | |
| 1325 | if (underlying) { |
| 1326 | _bufferevent_init_generic_timeout_cbs(&bev_ssl->bev.bev); |
| 1327 | bufferevent_incref(underlying); |
| 1328 | } |
| 1329 | |
| 1330 | bev_ssl->state = state; |
| 1331 | bev_ssl->last_write = -1; |
| 1332 | |
| 1333 | init_bio_counts(bev_ssl); |
| 1334 | |
| 1335 | switch (state) { |
| 1336 | case BUFFEREVENT_SSL_ACCEPTING: |
| 1337 | SSL_set_accept_state(bev_ssl->ssl); |
| 1338 | if (set_handshake_callbacks(bev_ssl, fd) < 0) |
| 1339 | goto err; |
| 1340 | break; |
| 1341 | case BUFFEREVENT_SSL_CONNECTING: |
| 1342 | SSL_set_connect_state(bev_ssl->ssl); |
| 1343 | if (set_handshake_callbacks(bev_ssl, fd) < 0) |
| 1344 | goto err; |
| 1345 | break; |
| 1346 | case BUFFEREVENT_SSL_OPEN: |
| 1347 | if (set_open_callbacks(bev_ssl, fd) < 0) |
| 1348 | goto err; |
| 1349 | break; |
| 1350 | default: |
| 1351 | goto err; |
| 1352 | } |
| 1353 | |
| 1354 | if (underlying) { |
| 1355 | bufferevent_setwatermark(underlying, EV_READ, 0, 0); |
| 1356 | bufferevent_enable(underlying, EV_READ|EV_WRITE); |
| 1357 | if (state == BUFFEREVENT_SSL_OPEN) |
| 1358 | bufferevent_suspend_read(underlying, |
| 1359 | BEV_SUSPEND_FILT_READ); |
| 1360 | } else { |
| 1361 | bev_ssl->bev.bev.enabled = EV_READ|EV_WRITE; |
| 1362 | if (bev_ssl->fd_is_set) { |
| 1363 | if (state != BUFFEREVENT_SSL_OPEN) |
| 1364 | if (event_add(&bev_ssl->bev.bev.ev_read, NULL) < 0) |
| 1365 | goto err; |
| 1366 | if (event_add(&bev_ssl->bev.bev.ev_write, NULL) < 0) |
| 1367 | goto err; |
| 1368 | } |
| 1369 | } |
| 1370 | |
| 1371 | return &bev_ssl->bev.bev; |
| 1372 | err: |
| 1373 | if (bev_ssl) |
| 1374 | bufferevent_free(&bev_ssl->bev.bev); |
| 1375 | return NULL; |
| 1376 | } |
| 1377 | |
| 1378 | struct bufferevent * |
| 1379 | bufferevent_openssl_filter_new(struct event_base *base, |
| 1380 | struct bufferevent *underlying, |
| 1381 | SSL *ssl, |
| 1382 | enum bufferevent_ssl_state state, |
| 1383 | int options) |
| 1384 | { |
| 1385 | /* We don't tell the BIO to close the bufferevent; we do it ourselves |
| 1386 | * on be_openssl_destruct */ |
| 1387 | int close_flag = 0; /* options & BEV_OPT_CLOSE_ON_FREE; */ |
| 1388 | BIO *bio; |
| 1389 | if (!underlying) |
| 1390 | return NULL; |
| 1391 | if (!(bio = BIO_new_bufferevent(underlying, close_flag))) |
| 1392 | return NULL; |
| 1393 | |
| 1394 | SSL_set_bio(ssl, bio, bio); |
| 1395 | |
| 1396 | return bufferevent_openssl_new_impl( |
| 1397 | base, underlying, -1, ssl, state, options); |
| 1398 | } |
| 1399 | |
| 1400 | struct bufferevent * |
| 1401 | bufferevent_openssl_socket_new(struct event_base *base, |
| 1402 | evutil_socket_t fd, |
| 1403 | SSL *ssl, |
| 1404 | enum bufferevent_ssl_state state, |
| 1405 | int options) |
| 1406 | { |
| 1407 | /* Does the SSL already have an fd? */ |
| 1408 | BIO *bio = SSL_get_wbio(ssl); |
| 1409 | long have_fd = -1; |
| 1410 | |
| 1411 | if (bio) |
| 1412 | have_fd = BIO_get_fd(bio, NULL); |
| 1413 | |
| 1414 | if (have_fd >= 0) { |
| 1415 | /* The SSL is already configured with an fd. */ |
| 1416 | if (fd < 0) { |
| 1417 | /* We should learn the fd from the SSL. */ |
| 1418 | fd = (evutil_socket_t) have_fd; |
| 1419 | } else if (have_fd == (long)fd) { |
| 1420 | /* We already know the fd from the SSL; do nothing */ |
| 1421 | } else { |
| 1422 | /* We specified an fd different from that of the SSL. |
| 1423 | This is probably an error on our part. Fail. */ |
| 1424 | return NULL; |
| 1425 | } |
| 1426 | (void) BIO_set_close(bio, 0); |
| 1427 | } else { |
| 1428 | /* The SSL isn't configured with a BIO with an fd. */ |
| 1429 | if (fd >= 0) { |
| 1430 | /* ... and we have an fd we want to use. */ |
| 1431 | bio = BIO_new_socket(fd, 0); |
| 1432 | SSL_set_bio(ssl, bio, bio); |
| 1433 | } else { |
| 1434 | /* Leave the fd unset. */ |
| 1435 | } |
| 1436 | } |
| 1437 | |
| 1438 | return bufferevent_openssl_new_impl( |
| 1439 | base, NULL, fd, ssl, state, options); |
| 1440 | } |
| 1441 | |
| 1442 | unsigned long |
| 1443 | bufferevent_get_openssl_error(struct bufferevent *bev) |
| 1444 | { |
| 1445 | unsigned long err = 0; |
| 1446 | struct bufferevent_openssl *bev_ssl; |
| 1447 | BEV_LOCK(bev); |
| 1448 | bev_ssl = upcast(bev); |
| 1449 | if (bev_ssl && bev_ssl->n_errors) { |
| 1450 | err = bev_ssl->errors[--bev_ssl->n_errors]; |
| 1451 | } |
| 1452 | BEV_UNLOCK(bev); |
| 1453 | return err; |
| 1454 | } |