Gitiles
Code Review Sign In
realtimeroboticsgroup.org / RealtimeRoboticsGroup / test / 41baf20be1280c8a32cf14c85970ff9e710e2089 / . / hw / bsp / stm32f0 / stm32f0xx_hal_conf.h
blob: cfa66b366c734f33ac44a3357dcdae8d75b5642f [file] [log] [blame]
Austin Schuh41baf202022-01-01 14:33:40 -0800[diff] [blame^]1/**
2 ******************************************************************************
3 * @file stm32f0xx_hal_conf.h
4 * @author MCD Application Team
5 * @brief HAL configuration file.
6 ******************************************************************************
7 * @attention
8 *
9 * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
10 * All rights reserved.</center></h2>
11 *
12 * This software component is licensed by ST under BSD 3-Clause license,
13 * the "License"; You may not use this file except in compliance with the
14 * License. You may obtain a copy of the License at:
15 * opensource.org/licenses/BSD-3-Clause
16 *
17 ******************************************************************************
18 */
19
20/* Define to prevent recursive inclusion -------------------------------------*/
21#ifndef __STM32F0xx_HAL_CONF_H
22#define __STM32F0xx_HAL_CONF_H
23
24#ifdef __cplusplus
25 extern "C" {
26#endif
27
28/* Exported types ------------------------------------------------------------*/
29/* Exported constants --------------------------------------------------------*/
30
31/* ########################## Module Selection ############################## */
32/**
33 * @brief This is the list of modules to be used in the HAL driver
34 */
35#define HAL_MODULE_ENABLED
36/*#define HAL_ADC_MODULE_ENABLED */
37/*#define HAL_CAN_MODULE_ENABLED */
38/*#define HAL_CEC_MODULE_ENABLED */
39/*#define HAL_COMP_MODULE_ENABLED */
40#define HAL_CORTEX_MODULE_ENABLED
41/*#define HAL_CRC_MODULE_ENABLED */
42/*#define HAL_DAC_MODULE_ENABLED */
43#define HAL_DMA_MODULE_ENABLED
44#define HAL_FLASH_MODULE_ENABLED
45#define HAL_GPIO_MODULE_ENABLED
46/*#define HAL_EXTI_MODULE_ENABLED */
47/*#define HAL_I2C_MODULE_ENABLED */
48/*#define HAL_I2S_MODULE_ENABLED */
49/*#define HAL_IRDA_MODULE_ENABLED */
50/*#define HAL_IWDG_MODULE_ENABLED */
51#define HAL_PCD_MODULE_ENABLED
52#define HAL_PWR_MODULE_ENABLED
53#define HAL_RCC_MODULE_ENABLED
54/*#define HAL_RTC_MODULE_ENABLED */
55/*#define HAL_SMARTCARD_MODULE_ENABLED */
56/*#define HAL_SMBUS_MODULE_ENABLED */
57/*#define HAL_SPI_MODULE_ENABLED */
58/*#define HAL_TIM_MODULE_ENABLED */
59/*#define HAL_TSC_MODULE_ENABLED */
60#define HAL_UART_MODULE_ENABLED
61/*#define HAL_USART_MODULE_ENABLED */
62/*#define HAL_WWDG_MODULE_ENABLED */
63
64/* ######################### Oscillator Values adaptation ################### */
65/**
66 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
67 * This value is used by the RCC HAL module to compute the system frequency
68 * (when HSE is used as system clock source, directly or through the PLL).
69 */
70#if !defined (HSE_VALUE)
71 #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
72#endif /* HSE_VALUE */
73
74/**
75 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
76 * Timeout value
77 */
78#if !defined (HSE_STARTUP_TIMEOUT)
79 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
80#endif /* HSE_STARTUP_TIMEOUT */
81
82/**
83 * @brief Internal High Speed oscillator (HSI) value.
84 * This value is used by the RCC HAL module to compute the system frequency
85 * (when HSI is used as system clock source, directly or through the PLL).
86 */
87#if !defined (HSI_VALUE)
88 #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
89#endif /* HSI_VALUE */
90
91/**
92 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
93 * Timeout value
94 */
95#if !defined (HSI_STARTUP_TIMEOUT)
96 #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */
97#endif /* HSI_STARTUP_TIMEOUT */
98
99/**
100 * @brief Internal High Speed oscillator for ADC (HSI14) value.
101 */
102#if !defined (HSI14_VALUE)
103 #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
104 The real value may vary depending on the variations
105 in voltage and temperature. */
106#endif /* HSI14_VALUE */
107
108/**
109 * @brief Internal High Speed oscillator for USB (HSI48) value.
110 */
111#if !defined (HSI48_VALUE)
112 #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
113 The real value may vary depending on the variations
114 in voltage and temperature. */
115#endif /* HSI48_VALUE */
116
117/**
118 * @brief Internal Low Speed oscillator (LSI) value.
119 */
120#if !defined (LSI_VALUE)
121 #define LSI_VALUE 32000U
122#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
123 The real value may vary depending on the variations
124 in voltage and temperature. */
125/**
126 * @brief External Low Speed oscillator (LSE) value.
127 */
128#if !defined (LSE_VALUE)
129 #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
130#endif /* LSE_VALUE */
131
132/**
133 * @brief Time out for LSE start up value in ms.
134 */
135#if !defined (LSE_STARTUP_TIMEOUT)
136 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
137#endif /* LSE_STARTUP_TIMEOUT */
138
139
140/* Tip: To avoid modifying this file each time you need to use different HSE,
141 === you can define the HSE value in your toolchain compiler preprocessor. */
142
143/* ########################### System Configuration ######################### */
144/**
145 * @brief This is the HAL system configuration section
146 */
147#define VDD_VALUE 3300U /*!< Value of VDD in mv */
148#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */
149 /* Warning: Must be set to higher priority for HAL_Delay() */
150 /* and HAL_GetTick() usage under interrupt context */
151#define USE_RTOS 0U
152#define PREFETCH_ENABLE 1U
153#define INSTRUCTION_CACHE_ENABLE 0U
154#define DATA_CACHE_ENABLE 0U
155#define USE_SPI_CRC 1U
156
157#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
158#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
159#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
160#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
161#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
162#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
163#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
164#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
165#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
166#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
167#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
168#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
169#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
170#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
171#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
172#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
173#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */
174#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
175
176/* ########################## Assert Selection ############################## */
177/**
178 * @brief Uncomment the line below to expanse the "assert_param" macro in the
179 * HAL drivers code
180 */
181 #define USE_FULL_ASSERT 1
182
183/* Includes ------------------------------------------------------------------*/
184/**
185 * @brief Include module's header file
186 */
187
188#ifdef HAL_RCC_MODULE_ENABLED
189 #include "stm32f0xx_hal_rcc.h"
190#endif /* HAL_RCC_MODULE_ENABLED */
191
192#ifdef HAL_GPIO_MODULE_ENABLED
193 #include "stm32f0xx_hal_gpio.h"
194#endif /* HAL_GPIO_MODULE_ENABLED */
195
196#ifdef HAL_EXTI_MODULE_ENABLED
197 #include "stm32f0xx_hal_exti.h"
198#endif /* HAL_EXTI_MODULE_ENABLED */
199
200#ifdef HAL_DMA_MODULE_ENABLED
201 #include "stm32f0xx_hal_dma.h"
202#endif /* HAL_DMA_MODULE_ENABLED */
203
204#ifdef HAL_CORTEX_MODULE_ENABLED
205 #include "stm32f0xx_hal_cortex.h"
206#endif /* HAL_CORTEX_MODULE_ENABLED */
207
208#ifdef HAL_ADC_MODULE_ENABLED
209 #include "stm32f0xx_hal_adc.h"
210#endif /* HAL_ADC_MODULE_ENABLED */
211
212#ifdef HAL_CAN_MODULE_ENABLED
213 #include "stm32f0xx_hal_can.h"
214#endif /* HAL_CAN_MODULE_ENABLED */
215
216#ifdef HAL_CEC_MODULE_ENABLED
217 #include "stm32f0xx_hal_cec.h"
218#endif /* HAL_CEC_MODULE_ENABLED */
219
220#ifdef HAL_COMP_MODULE_ENABLED
221 #include "stm32f0xx_hal_comp.h"
222#endif /* HAL_COMP_MODULE_ENABLED */
223
224#ifdef HAL_CRC_MODULE_ENABLED
225 #include "stm32f0xx_hal_crc.h"
226#endif /* HAL_CRC_MODULE_ENABLED */
227
228#ifdef HAL_DAC_MODULE_ENABLED
229 #include "stm32f0xx_hal_dac.h"
230#endif /* HAL_DAC_MODULE_ENABLED */
231
232#ifdef HAL_FLASH_MODULE_ENABLED
233 #include "stm32f0xx_hal_flash.h"
234#endif /* HAL_FLASH_MODULE_ENABLED */
235
236#ifdef HAL_I2C_MODULE_ENABLED
237 #include "stm32f0xx_hal_i2c.h"
238#endif /* HAL_I2C_MODULE_ENABLED */
239
240#ifdef HAL_I2S_MODULE_ENABLED
241 #include "stm32f0xx_hal_i2s.h"
242#endif /* HAL_I2S_MODULE_ENABLED */
243
244#ifdef HAL_IRDA_MODULE_ENABLED
245 #include "stm32f0xx_hal_irda.h"
246#endif /* HAL_IRDA_MODULE_ENABLED */
247
248#ifdef HAL_IWDG_MODULE_ENABLED
249 #include "stm32f0xx_hal_iwdg.h"
250#endif /* HAL_IWDG_MODULE_ENABLED */
251
252#ifdef HAL_PCD_MODULE_ENABLED
253 #include "stm32f0xx_hal_pcd.h"
254#endif /* HAL_PCD_MODULE_ENABLED */
255
256#ifdef HAL_PWR_MODULE_ENABLED
257 #include "stm32f0xx_hal_pwr.h"
258#endif /* HAL_PWR_MODULE_ENABLED */
259
260#ifdef HAL_RTC_MODULE_ENABLED
261 #include "stm32f0xx_hal_rtc.h"
262#endif /* HAL_RTC_MODULE_ENABLED */
263
264#ifdef HAL_SMARTCARD_MODULE_ENABLED
265 #include "stm32f0xx_hal_smartcard.h"
266#endif /* HAL_SMARTCARD_MODULE_ENABLED */
267
268#ifdef HAL_SMBUS_MODULE_ENABLED
269 #include "stm32f0xx_hal_smbus.h"
270#endif /* HAL_SMBUS_MODULE_ENABLED */
271
272#ifdef HAL_SPI_MODULE_ENABLED
273 #include "stm32f0xx_hal_spi.h"
274#endif /* HAL_SPI_MODULE_ENABLED */
275
276#ifdef HAL_TIM_MODULE_ENABLED
277 #include "stm32f0xx_hal_tim.h"
278#endif /* HAL_TIM_MODULE_ENABLED */
279
280#ifdef HAL_TSC_MODULE_ENABLED
281 #include "stm32f0xx_hal_tsc.h"
282#endif /* HAL_TSC_MODULE_ENABLED */
283
284#ifdef HAL_UART_MODULE_ENABLED
285 #include "stm32f0xx_hal_uart.h"
286#endif /* HAL_UART_MODULE_ENABLED */
287
288#ifdef HAL_USART_MODULE_ENABLED
289 #include "stm32f0xx_hal_usart.h"
290#endif /* HAL_USART_MODULE_ENABLED */
291
292#ifdef HAL_WWDG_MODULE_ENABLED
293 #include "stm32f0xx_hal_wwdg.h"
294#endif /* HAL_WWDG_MODULE_ENABLED */
295
296/* Exported macro ------------------------------------------------------------*/
297#ifdef USE_FULL_ASSERT
298/**
299 * @brief The assert_param macro is used for function's parameters check.
300 * @param expr If expr is false, it calls assert_failed function
301 * which reports the name of the source file and the source
302 * line number of the call that failed.
303 * If expr is true, it returns no value.
304 * @retval None
305 */
306 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
307/* Exported functions ------------------------------------------------------- */
308 void assert_failed(uint8_t* file, uint32_t line);
309#else
310 #define assert_param(expr) ((void)0U)
311#endif /* USE_FULL_ASSERT */
312
313#ifdef __cplusplus
314}
315#endif
316
317#endif /* __STM32F0xx_HAL_CONF_H */
318
319
320/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
321