y2019/constants.cc - RealtimeRoboticsGroup/test - Gitiles

 #include "y2019/constants.h"

 #include <inttypes.h>

 #include <map>

 #if __has_feature(address_sanitizer)
 #include "sanitizer/lsan_interface.h"
 #endif

 #include "aos/logging/logging.h"
 #include "aos/mutex/mutex.h"
 #include "aos/network/team_number.h"
 #include "aos/once.h"
 #include "y2019/control_loops/superstructure/elevator/integral_elevator_plant.h"
 #include "y2019/control_loops/superstructure/intake/integral_intake_plant.h"
 #include "y2019/control_loops/superstructure/stilts/integral_stilts_plant.h"
 #include "y2019/control_loops/superstructure/wrist/integral_wrist_plant.h"
 #include "y2019/vision/constants.h"

 namespace y2019 {
 namespace constants {

 using ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator;

 const int Values::kZeroingSampleSize;
 constexpr size_t Values::kNumCameras;

 namespace {

 const uint16_t kCompTeamNumber = 971;
 const uint16_t kPracticeTeamNumber = 9971;
 const uint16_t kCodingRobotTeamNumber = 7971;

 constexpr double FeetToMeters(double ft) {
   return 0.3048 * ft;
 }
 constexpr double InchToMeters(double in) {
   return 0.0254 * in;
 }
 constexpr double DegToRad(double deg) {
   return deg * M_PI / 180.0;
 }

 // Populates camera Pose information from the calibrated vision constants.
 void FillCameraPoses(
     uint32_t teensy_processor_id,
     ::std::array<Values::CameraCalibration, Values::kNumCameras> *cameras) {
   ::std::array<int, 5> camera_ids =
       vision::CameraSerialNumbers(teensy_processor_id);
   for (size_t ii = 0; ii < camera_ids.size(); ++ii) {
     const vision::CameraCalibration *calibration =
         vision::GetCamera(camera_ids[ii]);
     if (calibration != nullptr) {
       vision::CameraGeometry geometry = calibration->geometry;
       *cameras->at(ii).pose.mutable_pos() << geometry.location[0],
           geometry.location[1], geometry.location[2];
       cameras->at(ii).pose.set_theta(geometry.heading);
     }
   }
 }

 const Values *DoGetValuesForTeam(uint16_t team) {
   Values *const r = new Values();
   Values::PotAndAbsConstants *const elevator = &r->elevator;
   ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
       ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
       *const elevator_params = &(elevator->subsystem_params);
   Values::PotAndAbsConstants *const stilts = &r->stilts;
   ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
       ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
       *const stilts_params = &(stilts->subsystem_params);
   Values::PotAndAbsConstants *const wrist = &r->wrist;
   ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
       ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
       *const wrist_params = &(wrist->subsystem_params);
   ::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
       ::frc971::zeroing::AbsoluteEncoderZeroingEstimator> *const intake =
       &r->intake;

   // Elevator constants.
   elevator_params->zeroing_voltage = 3.0;
   elevator_params->operating_voltage = 12.0;
   elevator_params->zeroing_profile_params = {0.1, 1.0};
   elevator_params->default_profile_params = {4.0, 13.0};
   elevator_params->range = Values::kElevatorRange();
   elevator_params->make_integral_loop =
       &control_loops::superstructure::elevator::MakeIntegralElevatorLoop;
   elevator_params->zeroing_constants.average_filter_size =
       Values::kZeroingSampleSize;
   elevator_params->zeroing_constants.one_revolution_distance =
       M_PI * 2.0 * constants::Values::kElevatorEncoderRatio();
   elevator_params->zeroing_constants.zeroing_threshold = 0.005;
   elevator_params->zeroing_constants.moving_buffer_size = 20;
   elevator_params->zeroing_constants.allowable_encoder_error = 0.9;

   // Wrist constants.
   wrist_params->zeroing_voltage = 4.0;
   wrist_params->operating_voltage = 12.0;
   wrist_params->zeroing_profile_params = {0.5, 2.0};
   wrist_params->default_profile_params = {10.0, 40.0};
   wrist_params->range = Values::kWristRange();
   wrist_params->make_integral_loop =
       &control_loops::superstructure::wrist::MakeIntegralWristLoop;
   wrist_params->zeroing_constants.average_filter_size =
       Values::kZeroingSampleSize;
   wrist_params->zeroing_constants.one_revolution_distance =
       M_PI * 2.0 * constants::Values::kWristEncoderRatio();
   wrist_params->zeroing_constants.zeroing_threshold = 0.0005;
   wrist_params->zeroing_constants.moving_buffer_size = 20;
   wrist_params->zeroing_constants.allowable_encoder_error = 0.9;

   // Intake constants.
   intake->zeroing_voltage = 3.0;
   intake->operating_voltage = 12.0;
   intake->zeroing_profile_params = {0.5, 3.0};
   intake->default_profile_params = {6.0, 30.0};
   intake->range = Values::kIntakeRange();
   intake->make_integral_loop =
       control_loops::superstructure::intake::MakeIntegralIntakeLoop;
   intake->zeroing_constants.average_filter_size = Values::kZeroingSampleSize;
   intake->zeroing_constants.one_revolution_distance =
       M_PI * 2.0 * constants::Values::kIntakeEncoderRatio();
   intake->zeroing_constants.zeroing_threshold = 0.0005;
   intake->zeroing_constants.moving_buffer_size = 20;
   intake->zeroing_constants.allowable_encoder_error = 0.9;
   intake->zeroing_constants.middle_position = Values::kIntakeRange().middle();

   // Stilts constants.
   stilts_params->zeroing_voltage = 3.0;
   stilts_params->operating_voltage = 12.0;
   stilts_params->zeroing_profile_params = {0.1, 0.5};
   stilts_params->default_profile_params = {0.15, 0.5};
   stilts_params->range = Values::kStiltsRange();
   stilts_params->make_integral_loop =
       &control_loops::superstructure::stilts::MakeIntegralStiltsLoop;
   stilts_params->zeroing_constants.average_filter_size =
       Values::kZeroingSampleSize;
   stilts_params->zeroing_constants.one_revolution_distance =
       M_PI * 2.0 * constants::Values::kStiltsEncoderRatio();
   stilts_params->zeroing_constants.zeroing_threshold = 0.0005;
   stilts_params->zeroing_constants.moving_buffer_size = 20;
   stilts_params->zeroing_constants.allowable_encoder_error = 0.9;

   r->camera_noise_parameters = {.max_viewable_distance = 10.0,
                                 .heading_noise = 0.2,
                                 .nominal_distance_noise = 0.3,
                                 .nominal_skew_noise = 0.35,
                                 .nominal_height_noise = 0.01};

   // Deliberately make FOV a bit large so that we are overly conservative in
   // our EKF.
   for (auto &camera : r->cameras) {
     camera.fov = M_PI_2 * 1.1;
   }

   switch (team) {
     // A set of constants for tests.
     case 1:
       elevator_params->zeroing_constants.measured_absolute_position = 0.0;
       elevator->potentiometer_offset = 0.0;

       intake->zeroing_constants.measured_absolute_position = 0.0;

       wrist_params->zeroing_constants.measured_absolute_position = 0.0;
       wrist->potentiometer_offset = 0.0;

       stilts_params->zeroing_constants.measured_absolute_position = 0.0;
       stilts->potentiometer_offset = 0.0;

       // For the simulation, just place cameras at the center of the robot with
       // nominal angles (back/sides + 15 degree offset front cameras).
       r->cameras[0].pose.set_theta(M_PI);
       r->cameras[1].pose.set_theta(0.26);
       r->cameras[2].pose.set_theta(-0.26);
       r->cameras[3].pose.set_theta(M_PI_2);
       r->cameras[4].pose.set_theta(-M_PI_2);
       break;

     case kCompTeamNumber:
       elevator_params->zeroing_constants.measured_absolute_position = 0.024407;
       elevator->potentiometer_offset = -0.075017 + 0.015837 + 0.009793 - 0.012017;

       intake->zeroing_constants.measured_absolute_position = 1.860016;

       wrist_params->zeroing_constants.measured_absolute_position = 0.163840;
       wrist->potentiometer_offset = -4.257454;

       stilts_params->zeroing_constants.measured_absolute_position = 0.030049;
       stilts->potentiometer_offset = -0.015760 + 0.011604;
       break;

     case kPracticeTeamNumber:
       elevator_params->zeroing_constants.measured_absolute_position = 0.147809;
       elevator->potentiometer_offset = -0.022320 + 0.020567 - 0.022355 - 0.006497 + 0.019690;

       intake->zeroing_constants.measured_absolute_position = 1.756847;

       wrist_params->zeroing_constants.measured_absolute_position = 0.192576;
       wrist->potentiometer_offset = -4.200894 - 0.187134;

       stilts_params->zeroing_constants.measured_absolute_position = 0.043580;
       stilts->potentiometer_offset = -0.093820 + 0.0124 - 0.008334 + 0.004507;

       FillCameraPoses(vision::PracticeBotTeensyId(), &r->cameras);
       break;

     case kCodingRobotTeamNumber:
       elevator_params->zeroing_constants.measured_absolute_position = 0.0;
       elevator->potentiometer_offset = 0.0;

       intake->zeroing_constants.measured_absolute_position = 0.0;

       wrist_params->zeroing_constants.measured_absolute_position = 0.0;
       wrist->potentiometer_offset = 0.0;

       stilts_params->zeroing_constants.measured_absolute_position = 0.0;
       stilts->potentiometer_offset = 0.0;

       FillCameraPoses(vision::CodeBotTeensyId(), &r->cameras);

       break;

     default:
       LOG(FATAL, "unknown team #%" PRIu16 "\n", team);
   }

   return r;
 }

 const Values *DoGetValues() {
   uint16_t team = ::aos::network::GetTeamNumber();
   LOG(INFO, "creating a Constants for team %" PRIu16 "\n", team);
   return DoGetValuesForTeam(team);
 }

 }  // namespace

 const Values &GetValues() {
   static ::aos::Once<const Values> once(DoGetValues);
   return *once.Get();
 }

 const Values &GetValuesForTeam(uint16_t team_number) {
   static ::aos::Mutex mutex;
   ::aos::MutexLocker locker(&mutex);

   // IMPORTANT: This declaration has to stay after the mutex is locked to avoid
   // race conditions.
   static ::std::map<uint16_t, const Values *> values;

   if (values.count(team_number) == 0) {
     values[team_number] = DoGetValuesForTeam(team_number);
 #if __has_feature(address_sanitizer)
     __lsan_ignore_object(values[team_number]);
 #endif
   }
   return *values[team_number];
 }

 constexpr size_t Field::kNumTargets;
 constexpr size_t Field::kNumObstacles;

 Field::Field() {
   // TODO(james): These values need to re-verified. I got them by skimming the
   // manual and they all seem to be pretty much correct.
   //
   // Note: Per //frc971/control_loops/pose.h, coordinate system is:
   // -In meters
   // -Origin at center of our driver's station wall
   // -Positive X-axis pointing straight out from driver's station
   // -Positive Y-axis pointing straight left from the driver's perspective
   // -Positive Z-axis is straight up.
   // -The angle of the target is such that the angle is the angle you would
   //  need to be facing to see it straight-on. I.e., if the target angle is
   //  pi / 2.0, then you would be able to see it face on by facing straight
   //  left from the driver's point of view (if you were standing in the right
   //  spot).
   constexpr double kCenterFieldX = FeetToMeters(27.0) + InchToMeters(1.125);

   constexpr double kFarSideCargoBayX =
       kCenterFieldX - InchToMeters(20.875);
   constexpr double kMidSideCargoBayX = kFarSideCargoBayX - InchToMeters(21.75);
   constexpr double kNearSideCargoBayX = kMidSideCargoBayX - InchToMeters(21.75);
   constexpr double kSideCargoBayY = InchToMeters(24 + 3 + 0.875);
   constexpr double kSideCargoBayTheta = -M_PI_2;

   constexpr double kFaceCargoBayX =
       kCenterFieldX - InchToMeters(7 * 12 + 11.75 + 9);
   constexpr double kFaceCargoBayY = InchToMeters(10.875);
   constexpr double kFaceCargoBayTheta = 0.0;

   constexpr double kRocketX = kCenterFieldX - FeetToMeters(8);
   constexpr double kRocketY = InchToMeters((26 * 12 + 10.5) / 2.0);

   constexpr double kRocketPortX = kRocketX;
   constexpr double kRocketPortY = kRocketY - 0.70;
   constexpr double kRocketPortTheta = M_PI_2;

   // Half of portal + guess at width * cos(61.5 deg)
   const double kRocketHatchXOffset = InchToMeters(14.634);
   const double kRocketHatchY = kRocketPortY + InchToMeters(9.326);
   const double kRocketNearX = kRocketX - kRocketHatchXOffset;
   const double kRocketFarX = kRocketX + kRocketHatchXOffset;
   constexpr double kRocketNearTheta = DegToRad(28.5);
   constexpr double kRocketFarTheta = M_PI - kRocketNearTheta;

   constexpr double kHpSlotY = InchToMeters((26 * 12 + 10.5) / 2.0 - 25.9);
   constexpr double kHpSlotTheta = M_PI;

   constexpr double kNormalZ = 0.85;
   constexpr double kPortZ = 1.04;

   const Pose far_side_cargo_bay({kFarSideCargoBayX, kSideCargoBayY, kNormalZ},
                                 kSideCargoBayTheta);
   const Pose mid_side_cargo_bay({kMidSideCargoBayX, kSideCargoBayY, kNormalZ},
                                 kSideCargoBayTheta);
   const Pose near_side_cargo_bay({kNearSideCargoBayX, kSideCargoBayY, kNormalZ},
                                  kSideCargoBayTheta);

   const Pose face_cargo_bay({kFaceCargoBayX, kFaceCargoBayY, kNormalZ},
                             kFaceCargoBayTheta);

   const Pose rocket_port({kRocketPortX, kRocketPortY, kPortZ},
                          kRocketPortTheta);

   const Pose rocket_near({kRocketNearX, kRocketHatchY, kNormalZ},
                          kRocketNearTheta);
   const Pose rocket_far({kRocketFarX, kRocketHatchY, kNormalZ},
                         kRocketFarTheta);

   const Pose hp_slot({0.0, kHpSlotY, kNormalZ}, kHpSlotTheta);

   const ::std::array<Pose, 8> quarter_field_targets{
       {far_side_cargo_bay, mid_side_cargo_bay, near_side_cargo_bay,
        face_cargo_bay, rocket_port, rocket_near, rocket_far, hp_slot}};

   // Mirror across center field mid-line (short field axis):
   ::std::array<Pose, 16> half_field_targets;
   ::std::copy(quarter_field_targets.begin(), quarter_field_targets.end(),
               half_field_targets.begin());
   for (int ii = 0; ii < 8; ++ii) {
     const int jj = ii + 8;
     half_field_targets[jj] = quarter_field_targets[ii];
     half_field_targets[jj].mutable_pos()->x() =
         2.0 * kCenterFieldX - half_field_targets[jj].rel_pos().x();
     half_field_targets[jj].set_theta(
         aos::math::NormalizeAngle(M_PI - half_field_targets[jj].rel_theta()));
   }

   ::std::array<Pose, 32> target_poses_;

   // Mirror across x-axis (long field axis):
   ::std::copy(half_field_targets.begin(), half_field_targets.end(),
               target_poses_.begin());
   for (int ii = 0; ii < 16; ++ii) {
     const int jj = ii + 16;
     target_poses_[jj] = half_field_targets[ii];
     target_poses_[jj].mutable_pos()->y() *= -1;
     target_poses_[jj].set_theta(-target_poses_[jj].rel_theta());
   }
   for (int ii = 0; ii < 32; ++ii) {
     targets_[ii] = {target_poses_[ii]};
   }

   // Define rocket obstacles as just being a single line that should block any
   // cameras trying to see through the rocket up and down the field.
   // This line is parallel to the driver's station wall and extends behind
   // the portal.
   Obstacle rocket_obstacle({{kRocketPortX, kRocketY, 0.0}, 0.0},
                            {{kRocketPortX, kRocketPortY + 0.01, 0.0}, 0.0});
   // First, we mirror rocket obstacles across x-axis:
   Obstacle rocket_obstacle2({{kRocketPortX, -kRocketY, 0.0}, 0.0},
                             {{kRocketPortX, -kRocketPortY - 0.01, 0.0}, 0.0});

   // Define an obstacle for the Hab that extends striaght out a few feet from
   // the driver's station wall.
   // TODO(james): Does this actually block our view?
   const double kHabL3X = FeetToMeters(4.0);
   Obstacle hab_obstacle({}, {{kHabL3X, 0.0, 0.0}, 0.0});
   ::std::array<Obstacle, 3> half_obstacles{
       {rocket_obstacle, rocket_obstacle2, hab_obstacle}};
   ::std::copy(half_obstacles.begin(), half_obstacles.end(), obstacles_.begin());

   // Next, we mirror across the mid-line (short axis) to duplicate the
   // rockets and hab to opposite side of the field.
   for (int ii = 0; ii < 3; ++ii) {
     const int jj = ii + 3;
     obstacles_[jj] = half_obstacles[ii];
     obstacles_[jj].mutable_pose1()->mutable_pos()->x() =
         2.0 * kCenterFieldX - obstacles_[jj].mutable_pose1()->rel_pos().x();
     obstacles_[jj].mutable_pose2()->mutable_pos()->x() =
         2.0 * kCenterFieldX - obstacles_[jj].mutable_pose2()->rel_pos().x();
   }

   // Finally, define a rectangular cargo ship.
   const double kCargoCornerX = kFaceCargoBayX + 0.1;
   const double kCargoCornerY = kSideCargoBayY - 0.1;
   ::std::array<Pose, 4> cargo_corners{
       {{{kCargoCornerX, kCargoCornerY, 0.0}, 0.0},
        {{kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
        {{2.0 * kCenterFieldX - kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
        {{2.0 * kCenterFieldX - kCargoCornerX, kCargoCornerY, 0.0}, 0.0}}};
   for (int ii = 6; ii < 10; ++ii) {
     obstacles_[ii] = Obstacle(cargo_corners[ii % cargo_corners.size()],
                               cargo_corners[(ii + 1) % cargo_corners.size()]);
   }
 }

 }  // namespace constants
 }  // namespace y2019
	#include "y2019/constants.h"

	#include <inttypes.h>

	#include <map>

	#if __has_feature(address_sanitizer)
	#include "sanitizer/lsan_interface.h"
	#endif

	#include "aos/logging/logging.h"
	#include "aos/mutex/mutex.h"
	#include "aos/network/team_number.h"
	#include "aos/once.h"
	#include "y2019/control_loops/superstructure/elevator/integral_elevator_plant.h"
	#include "y2019/control_loops/superstructure/intake/integral_intake_plant.h"
	#include "y2019/control_loops/superstructure/stilts/integral_stilts_plant.h"
	#include "y2019/control_loops/superstructure/wrist/integral_wrist_plant.h"
	#include "y2019/vision/constants.h"

	namespace y2019 {
	namespace constants {

	using ::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator;

	const int Values::kZeroingSampleSize;
	constexpr size_t Values::kNumCameras;

	namespace {

	const uint16_t kCompTeamNumber = 971;
	const uint16_t kPracticeTeamNumber = 9971;
	const uint16_t kCodingRobotTeamNumber = 7971;

	constexpr double FeetToMeters(double ft) {
	return 0.3048 * ft;
	}
	constexpr double InchToMeters(double in) {
	return 0.0254 * in;
	}
	constexpr double DegToRad(double deg) {
	return deg * M_PI / 180.0;
	}

	// Populates camera Pose information from the calibrated vision constants.
	void FillCameraPoses(
	uint32_t teensy_processor_id,
	::std::array<Values::CameraCalibration, Values::kNumCameras> *cameras) {
	::std::array<int, 5> camera_ids =
	vision::CameraSerialNumbers(teensy_processor_id);
	for (size_t ii = 0; ii < camera_ids.size(); ++ii) {
	const vision::CameraCalibration *calibration =
	vision::GetCamera(camera_ids[ii]);
	if (calibration != nullptr) {
	vision::CameraGeometry geometry = calibration->geometry;
	*cameras->at(ii).pose.mutable_pos() << geometry.location[0],
	geometry.location[1], geometry.location[2];
	cameras->at(ii).pose.set_theta(geometry.heading);
	}
	}
	}

	const Values *DoGetValuesForTeam(uint16_t team) {
	Values *const r = new Values();
	Values::PotAndAbsConstants *const elevator = &r->elevator;
	::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
	::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
	*const elevator_params = &(elevator->subsystem_params);
	Values::PotAndAbsConstants *const stilts = &r->stilts;
	::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
	::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
	*const stilts_params = &(stilts->subsystem_params);
	Values::PotAndAbsConstants *const wrist = &r->wrist;
	::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
	::frc971::zeroing::PotAndAbsoluteEncoderZeroingEstimator>
	*const wrist_params = &(wrist->subsystem_params);
	::frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemParams<
	::frc971::zeroing::AbsoluteEncoderZeroingEstimator> *const intake =
	&r->intake;

	// Elevator constants.
	elevator_params->zeroing_voltage = 3.0;
	elevator_params->operating_voltage = 12.0;
	elevator_params->zeroing_profile_params = {0.1, 1.0};
	elevator_params->default_profile_params = {4.0, 13.0};
	elevator_params->range = Values::kElevatorRange();
	elevator_params->make_integral_loop =
	&control_loops::superstructure::elevator::MakeIntegralElevatorLoop;
	elevator_params->zeroing_constants.average_filter_size =
	Values::kZeroingSampleSize;
	elevator_params->zeroing_constants.one_revolution_distance =
	M_PI * 2.0 * constants::Values::kElevatorEncoderRatio();
	elevator_params->zeroing_constants.zeroing_threshold = 0.005;
	elevator_params->zeroing_constants.moving_buffer_size = 20;
	elevator_params->zeroing_constants.allowable_encoder_error = 0.9;

	// Wrist constants.
	wrist_params->zeroing_voltage = 4.0;
	wrist_params->operating_voltage = 12.0;
	wrist_params->zeroing_profile_params = {0.5, 2.0};
	wrist_params->default_profile_params = {10.0, 40.0};
	wrist_params->range = Values::kWristRange();
	wrist_params->make_integral_loop =
	&control_loops::superstructure::wrist::MakeIntegralWristLoop;
	wrist_params->zeroing_constants.average_filter_size =
	Values::kZeroingSampleSize;
	wrist_params->zeroing_constants.one_revolution_distance =
	M_PI * 2.0 * constants::Values::kWristEncoderRatio();
	wrist_params->zeroing_constants.zeroing_threshold = 0.0005;
	wrist_params->zeroing_constants.moving_buffer_size = 20;
	wrist_params->zeroing_constants.allowable_encoder_error = 0.9;

	// Intake constants.
	intake->zeroing_voltage = 3.0;
	intake->operating_voltage = 12.0;
	intake->zeroing_profile_params = {0.5, 3.0};
	intake->default_profile_params = {6.0, 30.0};
	intake->range = Values::kIntakeRange();
	intake->make_integral_loop =
	control_loops::superstructure::intake::MakeIntegralIntakeLoop;
	intake->zeroing_constants.average_filter_size = Values::kZeroingSampleSize;
	intake->zeroing_constants.one_revolution_distance =
	M_PI * 2.0 * constants::Values::kIntakeEncoderRatio();
	intake->zeroing_constants.zeroing_threshold = 0.0005;
	intake->zeroing_constants.moving_buffer_size = 20;
	intake->zeroing_constants.allowable_encoder_error = 0.9;
	intake->zeroing_constants.middle_position = Values::kIntakeRange().middle();

	// Stilts constants.
	stilts_params->zeroing_voltage = 3.0;
	stilts_params->operating_voltage = 12.0;
	stilts_params->zeroing_profile_params = {0.1, 0.5};
	stilts_params->default_profile_params = {0.15, 0.5};
	stilts_params->range = Values::kStiltsRange();
	stilts_params->make_integral_loop =
	&control_loops::superstructure::stilts::MakeIntegralStiltsLoop;
	stilts_params->zeroing_constants.average_filter_size =
	Values::kZeroingSampleSize;
	stilts_params->zeroing_constants.one_revolution_distance =
	M_PI * 2.0 * constants::Values::kStiltsEncoderRatio();
	stilts_params->zeroing_constants.zeroing_threshold = 0.0005;
	stilts_params->zeroing_constants.moving_buffer_size = 20;
	stilts_params->zeroing_constants.allowable_encoder_error = 0.9;

	r->camera_noise_parameters = {.max_viewable_distance = 10.0,
	.heading_noise = 0.2,
	.nominal_distance_noise = 0.3,
	.nominal_skew_noise = 0.35,
	.nominal_height_noise = 0.01};

	// Deliberately make FOV a bit large so that we are overly conservative in
	// our EKF.
	for (auto &camera : r->cameras) {
	camera.fov = M_PI_2 * 1.1;
	}

	switch (team) {
	// A set of constants for tests.
	case 1:
	elevator_params->zeroing_constants.measured_absolute_position = 0.0;
	elevator->potentiometer_offset = 0.0;

	intake->zeroing_constants.measured_absolute_position = 0.0;

	wrist_params->zeroing_constants.measured_absolute_position = 0.0;
	wrist->potentiometer_offset = 0.0;

	stilts_params->zeroing_constants.measured_absolute_position = 0.0;
	stilts->potentiometer_offset = 0.0;

	// For the simulation, just place cameras at the center of the robot with
	// nominal angles (back/sides + 15 degree offset front cameras).
	r->cameras[0].pose.set_theta(M_PI);
	r->cameras[1].pose.set_theta(0.26);
	r->cameras[2].pose.set_theta(-0.26);
	r->cameras[3].pose.set_theta(M_PI_2);
	r->cameras[4].pose.set_theta(-M_PI_2);
	break;

	case kCompTeamNumber:
	elevator_params->zeroing_constants.measured_absolute_position = 0.024407;
	elevator->potentiometer_offset = -0.075017 + 0.015837 + 0.009793 - 0.012017;

	intake->zeroing_constants.measured_absolute_position = 1.860016;

	wrist_params->zeroing_constants.measured_absolute_position = 0.163840;
	wrist->potentiometer_offset = -4.257454;

	stilts_params->zeroing_constants.measured_absolute_position = 0.030049;
	stilts->potentiometer_offset = -0.015760 + 0.011604;
	break;

	case kPracticeTeamNumber:
	elevator_params->zeroing_constants.measured_absolute_position = 0.147809;
	elevator->potentiometer_offset = -0.022320 + 0.020567 - 0.022355 - 0.006497 + 0.019690;

	intake->zeroing_constants.measured_absolute_position = 1.756847;

	wrist_params->zeroing_constants.measured_absolute_position = 0.192576;
	wrist->potentiometer_offset = -4.200894 - 0.187134;

	stilts_params->zeroing_constants.measured_absolute_position = 0.043580;
	stilts->potentiometer_offset = -0.093820 + 0.0124 - 0.008334 + 0.004507;

	FillCameraPoses(vision::PracticeBotTeensyId(), &r->cameras);
	break;

	case kCodingRobotTeamNumber:
	elevator_params->zeroing_constants.measured_absolute_position = 0.0;
	elevator->potentiometer_offset = 0.0;

	intake->zeroing_constants.measured_absolute_position = 0.0;

	wrist_params->zeroing_constants.measured_absolute_position = 0.0;
	wrist->potentiometer_offset = 0.0;

	stilts_params->zeroing_constants.measured_absolute_position = 0.0;
	stilts->potentiometer_offset = 0.0;

	FillCameraPoses(vision::CodeBotTeensyId(), &r->cameras);

	break;

	default:
	LOG(FATAL, "unknown team #%" PRIu16 "\n", team);
	}

	return r;
	}

	const Values *DoGetValues() {
	uint16_t team = ::aos::network::GetTeamNumber();
	LOG(INFO, "creating a Constants for team %" PRIu16 "\n", team);
	return DoGetValuesForTeam(team);
	}

	} // namespace

	const Values &GetValues() {
	static ::aos::Once<const Values> once(DoGetValues);
	return *once.Get();
	}

	const Values &GetValuesForTeam(uint16_t team_number) {
	static ::aos::Mutex mutex;
	::aos::MutexLocker locker(&mutex);

	// IMPORTANT: This declaration has to stay after the mutex is locked to avoid
	// race conditions.
	static ::std::map<uint16_t, const Values *> values;

	if (values.count(team_number) == 0) {
	values[team_number] = DoGetValuesForTeam(team_number);
	#if __has_feature(address_sanitizer)
	__lsan_ignore_object(values[team_number]);
	#endif
	}
	return *values[team_number];
	}

	constexpr size_t Field::kNumTargets;
	constexpr size_t Field::kNumObstacles;

	Field::Field() {
	// TODO(james): These values need to re-verified. I got them by skimming the
	// manual and they all seem to be pretty much correct.
	//
	// Note: Per //frc971/control_loops/pose.h, coordinate system is:
	// -In meters
	// -Origin at center of our driver's station wall
	// -Positive X-axis pointing straight out from driver's station
	// -Positive Y-axis pointing straight left from the driver's perspective
	// -Positive Z-axis is straight up.
	// -The angle of the target is such that the angle is the angle you would
	// need to be facing to see it straight-on. I.e., if the target angle is
	// pi / 2.0, then you would be able to see it face on by facing straight
	// left from the driver's point of view (if you were standing in the right
	// spot).
	constexpr double kCenterFieldX = FeetToMeters(27.0) + InchToMeters(1.125);

	constexpr double kFarSideCargoBayX =
	kCenterFieldX - InchToMeters(20.875);
	constexpr double kMidSideCargoBayX = kFarSideCargoBayX - InchToMeters(21.75);
	constexpr double kNearSideCargoBayX = kMidSideCargoBayX - InchToMeters(21.75);
	constexpr double kSideCargoBayY = InchToMeters(24 + 3 + 0.875);
	constexpr double kSideCargoBayTheta = -M_PI_2;

	constexpr double kFaceCargoBayX =
	kCenterFieldX - InchToMeters(7 * 12 + 11.75 + 9);
	constexpr double kFaceCargoBayY = InchToMeters(10.875);
	constexpr double kFaceCargoBayTheta = 0.0;

	constexpr double kRocketX = kCenterFieldX - FeetToMeters(8);
	constexpr double kRocketY = InchToMeters((26 * 12 + 10.5) / 2.0);

	constexpr double kRocketPortX = kRocketX;
	constexpr double kRocketPortY = kRocketY - 0.70;
	constexpr double kRocketPortTheta = M_PI_2;

	// Half of portal + guess at width * cos(61.5 deg)
	const double kRocketHatchXOffset = InchToMeters(14.634);
	const double kRocketHatchY = kRocketPortY + InchToMeters(9.326);
	const double kRocketNearX = kRocketX - kRocketHatchXOffset;
	const double kRocketFarX = kRocketX + kRocketHatchXOffset;
	constexpr double kRocketNearTheta = DegToRad(28.5);
	constexpr double kRocketFarTheta = M_PI - kRocketNearTheta;

	constexpr double kHpSlotY = InchToMeters((26 * 12 + 10.5) / 2.0 - 25.9);
	constexpr double kHpSlotTheta = M_PI;

	constexpr double kNormalZ = 0.85;
	constexpr double kPortZ = 1.04;

	const Pose far_side_cargo_bay({kFarSideCargoBayX, kSideCargoBayY, kNormalZ},
	kSideCargoBayTheta);
	const Pose mid_side_cargo_bay({kMidSideCargoBayX, kSideCargoBayY, kNormalZ},
	kSideCargoBayTheta);
	const Pose near_side_cargo_bay({kNearSideCargoBayX, kSideCargoBayY, kNormalZ},
	kSideCargoBayTheta);

	const Pose face_cargo_bay({kFaceCargoBayX, kFaceCargoBayY, kNormalZ},
	kFaceCargoBayTheta);

	const Pose rocket_port({kRocketPortX, kRocketPortY, kPortZ},
	kRocketPortTheta);

	const Pose rocket_near({kRocketNearX, kRocketHatchY, kNormalZ},
	kRocketNearTheta);
	const Pose rocket_far({kRocketFarX, kRocketHatchY, kNormalZ},
	kRocketFarTheta);

	const Pose hp_slot({0.0, kHpSlotY, kNormalZ}, kHpSlotTheta);

	const ::std::array<Pose, 8> quarter_field_targets{
	{far_side_cargo_bay, mid_side_cargo_bay, near_side_cargo_bay,
	face_cargo_bay, rocket_port, rocket_near, rocket_far, hp_slot}};

	// Mirror across center field mid-line (short field axis):
	::std::array<Pose, 16> half_field_targets;
	::std::copy(quarter_field_targets.begin(), quarter_field_targets.end(),
	half_field_targets.begin());
	for (int ii = 0; ii < 8; ++ii) {
	const int jj = ii + 8;
	half_field_targets[jj] = quarter_field_targets[ii];
	half_field_targets[jj].mutable_pos()->x() =
	2.0 * kCenterFieldX - half_field_targets[jj].rel_pos().x();
	half_field_targets[jj].set_theta(
	aos::math::NormalizeAngle(M_PI - half_field_targets[jj].rel_theta()));
	}

	::std::array<Pose, 32> target_poses_;

	// Mirror across x-axis (long field axis):
	::std::copy(half_field_targets.begin(), half_field_targets.end(),
	target_poses_.begin());
	for (int ii = 0; ii < 16; ++ii) {
	const int jj = ii + 16;
	target_poses_[jj] = half_field_targets[ii];
	target_poses_[jj].mutable_pos()->y() *= -1;
	target_poses_[jj].set_theta(-target_poses_[jj].rel_theta());
	}
	for (int ii = 0; ii < 32; ++ii) {
	targets_[ii] = {target_poses_[ii]};
	}

	// Define rocket obstacles as just being a single line that should block any
	// cameras trying to see through the rocket up and down the field.
	// This line is parallel to the driver's station wall and extends behind
	// the portal.
	Obstacle rocket_obstacle({{kRocketPortX, kRocketY, 0.0}, 0.0},
	{{kRocketPortX, kRocketPortY + 0.01, 0.0}, 0.0});
	// First, we mirror rocket obstacles across x-axis:
	Obstacle rocket_obstacle2({{kRocketPortX, -kRocketY, 0.0}, 0.0},
	{{kRocketPortX, -kRocketPortY - 0.01, 0.0}, 0.0});

	// Define an obstacle for the Hab that extends striaght out a few feet from
	// the driver's station wall.
	// TODO(james): Does this actually block our view?
	const double kHabL3X = FeetToMeters(4.0);
	Obstacle hab_obstacle({}, {{kHabL3X, 0.0, 0.0}, 0.0});
	::std::array<Obstacle, 3> half_obstacles{
	{rocket_obstacle, rocket_obstacle2, hab_obstacle}};
	::std::copy(half_obstacles.begin(), half_obstacles.end(), obstacles_.begin());

	// Next, we mirror across the mid-line (short axis) to duplicate the
	// rockets and hab to opposite side of the field.
	for (int ii = 0; ii < 3; ++ii) {
	const int jj = ii + 3;
	obstacles_[jj] = half_obstacles[ii];
	obstacles_[jj].mutable_pose1()->mutable_pos()->x() =
	2.0 * kCenterFieldX - obstacles_[jj].mutable_pose1()->rel_pos().x();
	obstacles_[jj].mutable_pose2()->mutable_pos()->x() =
	2.0 * kCenterFieldX - obstacles_[jj].mutable_pose2()->rel_pos().x();
	}

	// Finally, define a rectangular cargo ship.
	const double kCargoCornerX = kFaceCargoBayX + 0.1;
	const double kCargoCornerY = kSideCargoBayY - 0.1;
	::std::array<Pose, 4> cargo_corners{
	{{{kCargoCornerX, kCargoCornerY, 0.0}, 0.0},
	{{kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
	{{2.0 * kCenterFieldX - kCargoCornerX, -kCargoCornerY, 0.0}, 0.0},
	{{2.0 * kCenterFieldX - kCargoCornerX, kCargoCornerY, 0.0}, 0.0}}};
	for (int ii = 6; ii < 10; ++ii) {
	obstacles_[ii] = Obstacle(cargo_corners[ii % cargo_corners.size()],
	cargo_corners[(ii + 1) % cargo_corners.size()]);
	}
	}

	} // namespace constants
	} // namespace y2019