| #include "y2023_bot3/autonomous/autonomous_actor.h" |
| |
| #include <chrono> |
| #include <cinttypes> |
| #include <cmath> |
| |
| #include "absl/flags/flag.h" |
| |
| #include "aos/logging/logging.h" |
| #include "aos/util/math.h" |
| #include "frc971/control_loops/drivetrain/localizer_generated.h" |
| #include "y2023_bot3/autonomous/auto_splines.h" |
| #include "y2023_bot3/constants.h" |
| #include "y2023_bot3/control_loops/drivetrain/drivetrain_base.h" |
| |
| ABSL_FLAG(bool, spline_auto, false, "Run simple test S-spline auto mode."); |
| ABSL_FLAG(bool, charged_up, true, |
| "If true run charged up autonomous mode. 2 Piece non-cable side"); |
| ABSL_FLAG(bool, charged_up_middle, false, |
| "If true run charged up middle autonomous mode. Starts middle, " |
| "places cube mid, mobility"); |
| ABSL_FLAG(bool, one_piece, false, |
| "End charged_up autonomous after first cube is placed."); |
| |
| namespace y2023_bot3::autonomous { |
| |
| using ::frc971::ProfileParametersT; |
| |
| ProfileParametersT MakeProfileParameters(float max_velocity, |
| float max_acceleration) { |
| ProfileParametersT result; |
| result.max_velocity = max_velocity; |
| result.max_acceleration = max_acceleration; |
| return result; |
| } |
| |
| using ::aos::monotonic_clock; |
| using frc971::CreateProfileParameters; |
| using ::frc971::ProfileParametersT; |
| using frc971::control_loops::CreateStaticZeroingSingleDOFProfiledSubsystemGoal; |
| using frc971::control_loops::StaticZeroingSingleDOFProfiledSubsystemGoal; |
| using frc971::control_loops::drivetrain::LocalizerControl; |
| namespace chrono = ::std::chrono; |
| |
| AutonomousActor::AutonomousActor(::aos::EventLoop *event_loop) |
| : frc971::autonomous::BaseAutonomousActor( |
| event_loop, control_loops::drivetrain::GetDrivetrainConfig()), |
| localizer_control_sender_( |
| event_loop->MakeSender< |
| ::frc971::control_loops::drivetrain::LocalizerControl>( |
| "/drivetrain")), |
| joystick_state_fetcher_( |
| event_loop->MakeFetcher<aos::JoystickState>("/aos")), |
| robot_state_fetcher_(event_loop->MakeFetcher<aos::RobotState>("/aos")), |
| auto_splines_(), |
| superstructure_goal_sender_( |
| event_loop |
| ->MakeSender<::y2023_bot3::control_loops::superstructure::Goal>( |
| "/superstructure")), |
| superstructure_status_fetcher_( |
| event_loop->MakeFetcher< |
| ::y2023_bot3::control_loops::superstructure::Status>( |
| "/superstructure")) { |
| drivetrain_status_fetcher_.Fetch(); |
| replan_timer_ = event_loop->AddTimer([this]() { Replan(); }); |
| |
| event_loop->OnRun([this, event_loop]() { |
| replan_timer_->Schedule(event_loop->monotonic_now()); |
| button_poll_->Schedule(event_loop->monotonic_now(), |
| chrono::milliseconds(50)); |
| }); |
| |
| // TODO(james): Really need to refactor this code since we keep using it. |
| button_poll_ = event_loop->AddTimer([this]() { |
| const aos::monotonic_clock::time_point now = |
| this->event_loop()->context().monotonic_event_time; |
| if (robot_state_fetcher_.Fetch()) { |
| if (robot_state_fetcher_->user_button()) { |
| user_indicated_safe_to_reset_ = true; |
| MaybeSendStartingPosition(); |
| } |
| } |
| if (joystick_state_fetcher_.Fetch()) { |
| if (joystick_state_fetcher_->has_alliance() && |
| (joystick_state_fetcher_->alliance() != alliance_)) { |
| alliance_ = joystick_state_fetcher_->alliance(); |
| is_planned_ = false; |
| // Only kick the planning out by 2 seconds. If we end up enabled in |
| // that second, then we will kick it out further based on the code |
| // below. |
| replan_timer_->Schedule(now + std::chrono::seconds(2)); |
| } |
| if (joystick_state_fetcher_->enabled()) { |
| if (!is_planned_) { |
| // Only replan once we've been disabled for 5 seconds. |
| replan_timer_->Schedule(now + std::chrono::seconds(5)); |
| } |
| } |
| } |
| }); |
| } |
| |
| void AutonomousActor::Replan() { |
| if (!drivetrain_status_fetcher_.Fetch()) { |
| replan_timer_->Schedule(event_loop()->monotonic_now() + chrono::seconds(1)); |
| AOS_LOG(INFO, "Drivetrain not up, replanning in 1 second"); |
| return; |
| } |
| |
| if (alliance_ == aos::Alliance::kInvalid) { |
| return; |
| } |
| sent_starting_position_ = false; |
| if (absl::GetFlag(FLAGS_spline_auto)) { |
| test_spline_ = |
| PlanSpline(std::bind(&AutonomousSplines::TestSpline, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kForward); |
| |
| starting_position_ = test_spline_->starting_position(); |
| } else if (absl::GetFlag(FLAGS_charged_up)) { |
| charged_up_splines_ = { |
| PlanSpline(std::bind(&AutonomousSplines::Spline1, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kBackward), |
| PlanSpline(std::bind(&AutonomousSplines::Spline2, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kForward), |
| PlanSpline(std::bind(&AutonomousSplines::Spline3, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kBackward), |
| PlanSpline(std::bind(&AutonomousSplines::Spline4, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kForward)}; |
| starting_position_ = charged_up_splines_.value()[0].starting_position(); |
| CHECK(starting_position_); |
| } else if (absl::GetFlag(FLAGS_charged_up_middle)) { |
| charged_up_middle_splines_ = { |
| PlanSpline(std::bind(&AutonomousSplines::SplineMiddle1, &auto_splines_, |
| std::placeholders::_1, alliance_), |
| SplineDirection::kForward)}; |
| } |
| is_planned_ = true; |
| |
| MaybeSendStartingPosition(); |
| } // namespace autonomous |
| |
| void AutonomousActor::MaybeSendStartingPosition() { |
| if (is_planned_ && user_indicated_safe_to_reset_ && |
| !sent_starting_position_) { |
| CHECK(starting_position_); |
| SendStartingPosition(starting_position_.value()); |
| } |
| } |
| |
| void AutonomousActor::Reset() { |
| InitializeEncoders(); |
| ResetDrivetrain(); |
| |
| joystick_state_fetcher_.Fetch(); |
| CHECK(joystick_state_fetcher_.get() != nullptr) |
| << "Expect at least one JoystickState message before running auto..."; |
| alliance_ = joystick_state_fetcher_->alliance(); |
| |
| SendSuperstructureGoal(); |
| } |
| |
| bool AutonomousActor::RunAction( |
| const ::frc971::autonomous::AutonomousActionParams *params) { |
| Reset(); |
| |
| AOS_LOG(INFO, "Params are %d\n", params->mode()); |
| |
| if (!user_indicated_safe_to_reset_) { |
| AOS_LOG(WARNING, "Didn't send starting position prior to starting auto."); |
| CHECK(starting_position_); |
| SendStartingPosition(starting_position_.value()); |
| } |
| // Clear this so that we don't accidentally resend things as soon as we |
| // replan later. |
| user_indicated_safe_to_reset_ = false; |
| is_planned_ = false; |
| starting_position_.reset(); |
| |
| AOS_LOG(INFO, "Params are %d\n", params->mode()); |
| if (alliance_ == aos::Alliance::kInvalid) { |
| AOS_LOG(INFO, "Aborting autonomous due to invalid alliance selection."); |
| return false; |
| } |
| |
| if (absl::GetFlag(FLAGS_charged_up)) { |
| ChargedUp(); |
| } else { |
| AOS_LOG(INFO, "No autonomous mode selected."); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void AutonomousActor::SendStartingPosition(const Eigen::Vector3d &start) { |
| // Set up the starting position for the blue alliance. |
| |
| auto builder = localizer_control_sender_.MakeBuilder(); |
| |
| LocalizerControl::Builder localizer_control_builder = |
| builder.MakeBuilder<LocalizerControl>(); |
| localizer_control_builder.add_x(start(0)); |
| localizer_control_builder.add_y(start(1)); |
| localizer_control_builder.add_theta(start(2)); |
| localizer_control_builder.add_theta_uncertainty(0.00001); |
| AOS_LOG(INFO, "User button pressed, x: %f y: %f theta: %f", start(0), |
| start(1), start(2)); |
| if (builder.Send(localizer_control_builder.Finish()) != |
| aos::RawSender::Error::kOk) { |
| AOS_LOG(ERROR, "Failed to reset localizer.\n"); |
| } |
| } |
| |
| // Charged Up 2 Game Object Autonomous (non-cable side) |
| void AutonomousActor::ChargedUp() { |
| aos::monotonic_clock::time_point start_time = aos::monotonic_clock::now(); |
| |
| CHECK(charged_up_splines_); |
| |
| auto &splines = *charged_up_splines_; |
| |
| // Drive to second cube |
| if (!splines[0].WaitForPlan()) { |
| return; |
| } |
| splines[0].Start(); |
| |
| if (!splines[1].WaitForPlan()) { |
| return; |
| } |
| splines[1].Start(); |
| |
| if (!splines[1].WaitForSplineDistanceRemaining(0.1)) return; |
| |
| // Drive to third cube |
| if (!splines[2].WaitForPlan()) { |
| return; |
| } |
| splines[2].Start(); |
| |
| if (!splines[2].WaitForSplineDistanceRemaining(0.02)) { |
| return; |
| } |
| |
| AOS_LOG( |
| INFO, "Got there %lf s\n", |
| aos::time::DurationInSeconds(aos::monotonic_clock::now() - start_time)); |
| |
| // Drive back to grid |
| if (!splines[3].WaitForPlan()) { |
| return; |
| } |
| splines[3].Start(); |
| std::this_thread::sleep_for(chrono::milliseconds(600)); |
| |
| if (!splines[3].WaitForSplineDistanceRemaining(0.1)) return; |
| } |
| |
| // Charged Up Place and Mobility Autonomous (middle) |
| void AutonomousActor::ChargedUpMiddle() { |
| CHECK(charged_up_middle_splines_); |
| |
| auto &splines = *charged_up_middle_splines_; |
| |
| AOS_LOG(INFO, "Going to preload"); |
| |
| if (!splines[0].WaitForPlan()) { |
| return; |
| } |
| splines[0].Start(); |
| } |
| |
| void AutonomousActor::SendSuperstructureGoal() { |
| auto builder = superstructure_goal_sender_.MakeBuilder(); |
| |
| control_loops::superstructure::Goal::Builder superstructure_builder = |
| builder.MakeBuilder<control_loops::superstructure::Goal>(); |
| |
| if (builder.Send(superstructure_builder.Finish()) != |
| aos::RawSender::Error::kOk) { |
| AOS_LOG(ERROR, "Sending superstructure goal failed.\n"); |
| } |
| } |
| |
| } // namespace y2023_bot3::autonomous |