third_party/gmp/tune/Makefile.am - RealtimeRoboticsGroup/test - Gitiles

 ## Process this file with automake to generate Makefile.in

 # Copyright 2000-2003, 2005-2011 Free Software Foundation, Inc.
 #
 #  This file is part of the GNU MP Library.
 #
 #  The GNU MP Library is free software; you can redistribute it and/or modify
 #  it under the terms of either:
 #
 #    * the GNU Lesser General Public License as published by the Free
 #      Software Foundation; either version 3 of the License, or (at your
 #      option) any later version.
 #
 #  or
 #
 #    * the GNU General Public License as published by the Free Software
 #      Foundation; either version 2 of the License, or (at your option) any
 #      later version.
 #
 #  or both in parallel, as here.
 #
 #  The GNU MP Library is distributed in the hope that it will be useful, but
 #  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 #  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 #  for more details.
 #
 #  You should have received copies of the GNU General Public License and the
 #  GNU Lesser General Public License along with the GNU MP Library.  If not,
 #  see https://www.gnu.org/licenses/.


 AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/tests
 AM_LDFLAGS = -no-install

 EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \
   ia64.asm powerpc.asm powerpc64.asm x86_64.asm many.pl
 noinst_HEADERS = speed.h

 # Prefer -static on the speed and tune programs, since that can avoid
 # overheads of shared library linkages on some systems.  Libtool tends to
 # botch -static if configured with --disable-static, perhaps reasonably
 # enough.  In any event under --disable-static the only choice is a dynamic
 # link so there's no point in -static.
 #
 if ENABLE_STATIC
 STATIC = -static
 else
 STATIC =
 endif


 EXTRA_LTLIBRARIES = libspeed.la

 libspeed_la_SOURCES =							\
   common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c		\
   div_qr_1n_pi1_1.c div_qr_1n_pi1_2.c div_qr_1_tune.c			\
   freq.c								\
   gcdext_single.c gcdext_double.c gcdextod.c gcdextos.c			\
   hgcd_lehmer.c hgcd_appr_lehmer.c hgcd_reduce_1.c hgcd_reduce_2.c	\
   jacbase1.c jacbase2.c jacbase3.c jacbase4.c				\
   hgcd2-1.c hgcd2-2.c hgcd2-3.c hgcd2-4.c hgcd2-5.c			\
   mod_1_div.c mod_1_inv.c mod_1_1-1.c mod_1_1-2.c modlinv.c		\
   noop.c powm_mod.c powm_redc.c pre_divrem_1.c				\
   set_strb.c set_strs.c set_strp.c time.c

 libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \
   $(top_builddir)/tests/libtests.la $(top_builddir)/libgmp.la
 libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM)
 libspeed_la_LDFLAGS = $(STATIC)

 $(top_builddir)/tests/libtests.la:
 	cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la


 # The library code is faster static than shared on some systems, so do
 # tuning and measuring with static, since users who care about maximizing
 # speed will be using that.  speed-dynamic exists to show the difference.
 #
 # On Solaris 8, gcc 2.95.2 -static is somehow broken (it creates executables
 # that immediately seg fault), so -all-static is not used.  The only thing
 # -all-static does is make libc static linked as well as libgmp, and that
 # makes a difference only when measuring malloc and friends in the speed
 # program.  This can always be forced with "make speed_LDFLAGS=-all-static
 # ..." if desired, see tune/README.

 EXTRA_PROGRAMS = speed speed-dynamic speed-ext tuneup tune-gcd-p

 DEPENDENCIES = libspeed.la
 LDADD = $(DEPENDENCIES) $(TUNE_LIBS)

 speed_SOURCES = speed.c
 speed_LDFLAGS = $(STATIC)

 speed_dynamic_SOURCES = speed.c

 speed_ext_SOURCES = speed-ext.c
 speed_ext_LDFLAGS = $(STATIC)

 tuneup_SOURCES = tuneup.c hgcd2.c
 nodist_tuneup_SOURCES = sqr_basecase.c fac_ui.c $(TUNE_MPN_SRCS)
 tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la
 tuneup_LDADD = $(tuneup_DEPENDENCIES) $(TUNE_LIBS)
 tuneup_LDFLAGS = $(STATIC)

 tune_gcd_p_SOURCES = tune-gcd-p.c
 tune_gcd_p_DEPENDENCIES = ../mpn/gcd.c
 tune_gcd_p_LDFLAGS = $(STATIC)


 tune:
 	$(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT)
 	./tuneup

 allprogs: $(EXTRA_PROGRAMS)

 # $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl
 CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \
 	$(TUNE_MPN_SRCS) fac_ui.c sqr_asm.asm \
 	stg.gnuplot stg.data \
 	mtg.gnuplot mtg.data \
 	fibg.gnuplot fibg.data \
 	graph.gnuplot graph.data \
 	$(MANY_CLEAN)
 DISTCLEANFILES = sqr_basecase.c  $(MANY_DISTCLEAN)


 # Generating these little files at build time seems better than including
 # them in the distribution, since the list can be changed more easily.
 #
 # mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1
 # and 2 limb divisors, which are never used during tuning, so it doesn't
 # matter whether it picks up a tuned or untuned version of those.
 #
 # divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking
 # problem.  If a native divrem_1 provides an mpn_divrem_1c entrypoint then
 # common.c will want that, but the generic divrem_1 doesn't provide it,
 # likewise for mod_1.  The simplest way around this is to have the tune
 # build versions renamed suitably.
 #
 # FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the
 # recompiled object will be rebuilt if that file changes.

 TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) divrem_1.c mod_1.c
 TUNE_MPN_SRCS_BASIC = div_qr_2.c bdiv_q.c bdiv_qr.c			\
   dcpi1_div_qr.c dcpi1_divappr_q.c dcpi1_bdiv_qr.c dcpi1_bdiv_q.c	\
   invertappr.c invert.c binvert.c divrem_2.c gcd.c gcdext.c		\
   get_str.c set_str.c matrix22_mul.c					\
   hgcd.c hgcd_appr.c hgcd_reduce.c					\
   mul_n.c sqr.c sec_powm.c						\
   mullo_n.c mul_fft.c mul.c tdiv_qr.c mulmod_bnm1.c sqrmod_bnm1.c	\
   mulmid.c mulmid_n.c toom42_mulmid.c sqrlo.c sqrlo_basecase.c		\
   nussbaumer_mul.c toom6h_mul.c toom8h_mul.c toom6_sqr.c toom8_sqr.c	\
   toom22_mul.c toom2_sqr.c toom33_mul.c toom3_sqr.c toom44_mul.c toom4_sqr.c

 $(TUNE_MPN_SRCS_BASIC):
 	for i in $(TUNE_MPN_SRCS_BASIC); do \
 	  echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
 	  echo "#include \"mpn/generic/$$i\"" >>$$i; \
 	done

 divrem_1.c:
 	echo "#define TUNE_PROGRAM_BUILD 1"                >divrem_1.c
 	echo "#define __gmpn_divrem_1  mpn_divrem_1_tune" >>divrem_1.c
 	echo "#include \"mpn/generic/divrem_1.c\""        >>divrem_1.c

 mod_1.c:
 	echo "#define TUNE_PROGRAM_BUILD 1"          >mod_1.c
 	echo "#define __gmpn_mod_1  mpn_mod_1_tune" >>mod_1.c
 	echo "#include \"mpn/generic/mod_1.c\""     >>mod_1.c

 sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm
 	echo 'define(SQR_TOOM2_THRESHOLD_OVERRIDE,SQR_TOOM2_THRESHOLD_MAX)' >sqr_asm.asm
 	echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm

 # FIXME: Should it depend on $(top_builddir)/fac_ui.h too?
 fac_ui.c: $(top_builddir)/mpz/fac_ui.c
 	echo "#define TUNE_PROGRAM_BUILD 1"          >fac_ui.c
 	echo "#define __gmpz_fac_ui mpz_fac_ui_tune" >>fac_ui.c
 	echo "#define __gmpz_oddfac_1 mpz_oddfac_1_tune" >>fac_ui.c
 	echo "#include \"mpz/oddfac_1.c\""           >>fac_ui.c
 	echo "#include \"mpz/fac_ui.c\""             >>fac_ui.c

 include ../mpn/Makeasm.am

 .NOTPARALLEL:
	## Process this file with automake to generate Makefile.in

	# Copyright 2000-2003, 2005-2011 Free Software Foundation, Inc.
	#
	# This file is part of the GNU MP Library.
	#
	# The GNU MP Library is free software; you can redistribute it and/or modify
	# it under the terms of either:
	#
	# * the GNU Lesser General Public License as published by the Free
	# Software Foundation; either version 3 of the License, or (at your
	# option) any later version.
	#
	# or
	#
	# * the GNU General Public License as published by the Free Software
	# Foundation; either version 2 of the License, or (at your option) any
	# later version.
	#
	# or both in parallel, as here.
	#
	# The GNU MP Library is distributed in the hope that it will be useful, but
	# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	# for more details.
	#
	# You should have received copies of the GNU General Public License and the
	# GNU Lesser General Public License along with the GNU MP Library. If not,
	# see https://www.gnu.org/licenses/.


	AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/tests
	AM_LDFLAGS = -no-install

	EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \
	ia64.asm powerpc.asm powerpc64.asm x86_64.asm many.pl
	noinst_HEADERS = speed.h

	# Prefer -static on the speed and tune programs, since that can avoid
	# overheads of shared library linkages on some systems. Libtool tends to
	# botch -static if configured with --disable-static, perhaps reasonably
	# enough. In any event under --disable-static the only choice is a dynamic
	# link so there's no point in -static.
	#
	if ENABLE_STATIC
	STATIC = -static
	else
	STATIC =
	endif


	EXTRA_LTLIBRARIES = libspeed.la

	libspeed_la_SOURCES = \
	common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c \
	div_qr_1n_pi1_1.c div_qr_1n_pi1_2.c div_qr_1_tune.c \
	freq.c \
	gcdext_single.c gcdext_double.c gcdextod.c gcdextos.c \
	hgcd_lehmer.c hgcd_appr_lehmer.c hgcd_reduce_1.c hgcd_reduce_2.c \
	jacbase1.c jacbase2.c jacbase3.c jacbase4.c \
	hgcd2-1.c hgcd2-2.c hgcd2-3.c hgcd2-4.c hgcd2-5.c \
	mod_1_div.c mod_1_inv.c mod_1_1-1.c mod_1_1-2.c modlinv.c \
	noop.c powm_mod.c powm_redc.c pre_divrem_1.c \
	set_strb.c set_strs.c set_strp.c time.c

	libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \
	$(top_builddir)/tests/libtests.la $(top_builddir)/libgmp.la
	libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM)
	libspeed_la_LDFLAGS = $(STATIC)

	$(top_builddir)/tests/libtests.la:
	cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la


	# The library code is faster static than shared on some systems, so do
	# tuning and measuring with static, since users who care about maximizing
	# speed will be using that. speed-dynamic exists to show the difference.
	#
	# On Solaris 8, gcc 2.95.2 -static is somehow broken (it creates executables
	# that immediately seg fault), so -all-static is not used. The only thing
	# -all-static does is make libc static linked as well as libgmp, and that
	# makes a difference only when measuring malloc and friends in the speed
	# program. This can always be forced with "make speed_LDFLAGS=-all-static
	# ..." if desired, see tune/README.

	EXTRA_PROGRAMS = speed speed-dynamic speed-ext tuneup tune-gcd-p

	DEPENDENCIES = libspeed.la
	LDADD = $(DEPENDENCIES) $(TUNE_LIBS)

	speed_SOURCES = speed.c
	speed_LDFLAGS = $(STATIC)

	speed_dynamic_SOURCES = speed.c

	speed_ext_SOURCES = speed-ext.c
	speed_ext_LDFLAGS = $(STATIC)

	tuneup_SOURCES = tuneup.c hgcd2.c
	nodist_tuneup_SOURCES = sqr_basecase.c fac_ui.c $(TUNE_MPN_SRCS)
	tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la
	tuneup_LDADD = $(tuneup_DEPENDENCIES) $(TUNE_LIBS)
	tuneup_LDFLAGS = $(STATIC)

	tune_gcd_p_SOURCES = tune-gcd-p.c
	tune_gcd_p_DEPENDENCIES = ../mpn/gcd.c
	tune_gcd_p_LDFLAGS = $(STATIC)


	tune:
	$(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT)
	./tuneup

	allprogs: $(EXTRA_PROGRAMS)

	# $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl
	CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \
	$(TUNE_MPN_SRCS) fac_ui.c sqr_asm.asm \
	stg.gnuplot stg.data \
	mtg.gnuplot mtg.data \
	fibg.gnuplot fibg.data \
	graph.gnuplot graph.data \
	$(MANY_CLEAN)
	DISTCLEANFILES = sqr_basecase.c $(MANY_DISTCLEAN)


	# Generating these little files at build time seems better than including
	# them in the distribution, since the list can be changed more easily.
	#
	# mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1
	# and 2 limb divisors, which are never used during tuning, so it doesn't
	# matter whether it picks up a tuned or untuned version of those.
	#
	# divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking
	# problem. If a native divrem_1 provides an mpn_divrem_1c entrypoint then
	# common.c will want that, but the generic divrem_1 doesn't provide it,
	# likewise for mod_1. The simplest way around this is to have the tune
	# build versions renamed suitably.
	#
	# FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the
	# recompiled object will be rebuilt if that file changes.

	TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) divrem_1.c mod_1.c
	TUNE_MPN_SRCS_BASIC = div_qr_2.c bdiv_q.c bdiv_qr.c \
	dcpi1_div_qr.c dcpi1_divappr_q.c dcpi1_bdiv_qr.c dcpi1_bdiv_q.c \
	invertappr.c invert.c binvert.c divrem_2.c gcd.c gcdext.c \
	get_str.c set_str.c matrix22_mul.c \
	hgcd.c hgcd_appr.c hgcd_reduce.c \
	mul_n.c sqr.c sec_powm.c \
	mullo_n.c mul_fft.c mul.c tdiv_qr.c mulmod_bnm1.c sqrmod_bnm1.c \
	mulmid.c mulmid_n.c toom42_mulmid.c sqrlo.c sqrlo_basecase.c \
	nussbaumer_mul.c toom6h_mul.c toom8h_mul.c toom6_sqr.c toom8_sqr.c \
	toom22_mul.c toom2_sqr.c toom33_mul.c toom3_sqr.c toom44_mul.c toom4_sqr.c

	$(TUNE_MPN_SRCS_BASIC):
	for i in $(TUNE_MPN_SRCS_BASIC); do \
	echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
	echo "#include \"mpn/generic/$$i\"" >>$$i; \
	done

	divrem_1.c:
	echo "#define TUNE_PROGRAM_BUILD 1" >divrem_1.c
	echo "#define __gmpn_divrem_1 mpn_divrem_1_tune" >>divrem_1.c
	echo "#include \"mpn/generic/divrem_1.c\"" >>divrem_1.c

	mod_1.c:
	echo "#define TUNE_PROGRAM_BUILD 1" >mod_1.c
	echo "#define __gmpn_mod_1 mpn_mod_1_tune" >>mod_1.c
	echo "#include \"mpn/generic/mod_1.c\"" >>mod_1.c

	sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm
	echo 'define(SQR_TOOM2_THRESHOLD_OVERRIDE,SQR_TOOM2_THRESHOLD_MAX)' >sqr_asm.asm
	echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm

	# FIXME: Should it depend on $(top_builddir)/fac_ui.h too?
	fac_ui.c: $(top_builddir)/mpz/fac_ui.c
	echo "#define TUNE_PROGRAM_BUILD 1" >fac_ui.c
	echo "#define __gmpz_fac_ui mpz_fac_ui_tune" >>fac_ui.c
	echo "#define __gmpz_oddfac_1 mpz_oddfac_1_tune" >>fac_ui.c
	echo "#include \"mpz/oddfac_1.c\"" >>fac_ui.c
	echo "#include \"mpz/fac_ui.c\"" >>fac_ui.c

	include ../mpn/Makeasm.am

	.NOTPARALLEL: