| ST_FAMILY = f2 |
| DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver |
| |
| ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) |
| ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver |
| |
| CFLAGS += \ |
| -flto \ |
| -mthumb \ |
| -mabi=aapcs \ |
| -mcpu=cortex-m3 \ |
| -mfloat-abi=soft \ |
| -nostdlib -nostartfiles \ |
| -DSTM32F207xx \ |
| -DCFG_TUSB_MCU=OPT_MCU_STM32F2 |
| |
| # mcu driver cause following warnings |
| CFLAGS += -Wno-error=sign-compare |
| |
| # All source paths should be relative to the top level. |
| LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld |
| |
| SRC_C += \ |
| src/portable/synopsys/dwc2/dcd_dwc2.c \ |
| $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ |
| $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ |
| $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ |
| $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ |
| $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ |
| $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c |
| |
| SRC_S += \ |
| $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s |
| |
| INC += \ |
| $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ |
| $(TOP)/$(ST_CMSIS)/Include \ |
| $(TOP)/$(ST_HAL_DRIVER)/Inc \ |
| $(TOP)/hw/bsp/$(BOARD) |
| |
| # For freeRTOS port source |
| FREERTOS_PORT = ARM_CM3 |
| |
| # For flash-jlink target |
| JLINK_DEVICE = stm32f207zg |
| |
| # flash target using on-board stlink |
| flash: flash-stlink |