Work on finishing up the board
Add some missing components, get the silkscreen sorted out, and fix
which pins come out to which connectors.
diff --git a/motors/packages/2220.fp b/motors/packages/2220.fp
index f2765bb..4c8ac60 100644
--- a/motors/packages/2220.fp
+++ b/motors/packages/2220.fp
@@ -1,27 +1,9 @@
- # grab the input values and convert to 1/100 mil
- # how much to grow the pads by for soldermask [1/100 mil]
- # clearance from planes [1/100 mil]
- # silk screen width [1/100 mil]
- # courtyard silk screen width [1/100 mil]
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "2022" 0 0 -3150 -3150 0 100 ""]
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "2220" 0 0 -3150 -3150 0 100 ""]
(
-#
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
Pad[-10236 -7874
-10236 7874
- 4725 2000 3552 "1" "1" "square"]
+ 4725 2000 5725 "1" "1" "square"]
Pad[10236 -7874
10236 7874
- 4725 2000 3552 "2" "2" "square"]
-#
-# This draws a 1 mil placement courtyard outline in silk. It should probably
-# not be included since you wont want to try and fab a 1 mil silk line. Then
-# again, it is most useful during parts placement. It really is time for some
-# additional non-fab layers...
-# ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval( V2/2) CYW]
-# ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval( V1/2) eval(-1*V2/2) CYW]
-# ElementLine[eval( V1/2) eval( V2/2) eval( V1/2) eval(-1*V2/2) CYW]
-# ElementLine[eval( V1/2) eval( V2/2) eval(-1*V1/2) eval( V2/2) CYW]
+ 4725 2000 5725 "2" "2" "square"]
)