Squashed 'third_party/allwpilib_2017/' content from commit 35ac87d
Change-Id: I7bb6f5556c30d3f5a092e68de0be9c710c60c9f4
git-subtree-dir: third_party/allwpilib_2017
git-subtree-split: 35ac87d6ff8b7f061c4f18c9ea316e5dccd4888a
diff --git a/wpilibc/shared/include/WPIErrors.h b/wpilibc/shared/include/WPIErrors.h
new file mode 100644
index 0000000..ece177c
--- /dev/null
+++ b/wpilibc/shared/include/WPIErrors.h
@@ -0,0 +1,104 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) FIRST 2008-2017. All Rights Reserved. */
+/* Open Source Software - may be modified and shared by FRC teams. The code */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project. */
+/*----------------------------------------------------------------------------*/
+
+#pragma once
+
+#include <stdint.h>
+
+#ifdef WPI_ERRORS_DEFINE_STRINGS
+#define S(label, offset, message) \
+ const char* wpi_error_s_##label = message; \
+ const int wpi_error_value_##label = offset
+#else
+#define S(label, offset, message) \
+ extern const char* wpi_error_s_##label; \
+ const int wpi_error_value_##label = offset
+#endif
+
+/*
+ * Fatal errors
+ */
+S(ModuleIndexOutOfRange, -1,
+ "Allocating module that is out of range or not found");
+S(ChannelIndexOutOfRange, -1, "Allocating channel that is out of range");
+S(NotAllocated, -2, "Attempting to free unallocated resource");
+S(ResourceAlreadyAllocated, -3, "Attempted to reuse an allocated resource");
+S(NoAvailableResources, -4, "No available resources to allocate");
+S(NullParameter, -5, "A pointer parameter to a method is nullptr");
+S(Timeout, -6, "A timeout has been exceeded");
+S(CompassManufacturerError, -7, "Compass manufacturer doesn't match HiTechnic");
+S(CompassTypeError, -8,
+ "Compass type doesn't match expected type for HiTechnic compass");
+S(IncompatibleMode, -9, "The object is in an incompatible mode");
+S(AnalogTriggerLimitOrderError, -10,
+ "AnalogTrigger limits error. Lower limit > Upper Limit");
+S(AnalogTriggerPulseOutputError, -11,
+ "Attempted to read AnalogTrigger pulse output.");
+S(TaskError, -12, "Task can't be started");
+S(TaskIDError, -13, "Task error: Invalid ID.");
+S(TaskDeletedError, -14, "Task error: Task already deleted.");
+S(TaskOptionsError, -15, "Task error: Invalid options.");
+S(TaskMemoryError, -16, "Task can't be started due to insufficient memory.");
+S(TaskPriorityError, -17, "Task error: Invalid priority [1-255].");
+S(DriveUninitialized, -18, "RobotDrive not initialized for the C interface");
+S(CompressorNonMatching, -19,
+ "Compressor slot/channel doesn't match previous instance");
+S(CompressorAlreadyDefined, -20, "Creating a second compressor instance");
+S(CompressorUndefined, -21,
+ "Using compressor functions without defining compressor");
+S(InconsistentArrayValueAdded, -22,
+ "When packing data into an array to the dashboard, not all values added were "
+ "of the same type.");
+S(MismatchedComplexTypeClose, -23,
+ "When packing data to the dashboard, a Close for a complex type was called "
+ "without a matching Open.");
+S(DashboardDataOverflow, -24,
+ "When packing data to the dashboard, too much data was packed and the buffer "
+ "overflowed.");
+S(DashboardDataCollision, -25,
+ "The same buffer was used for packing data and for printing.");
+S(EnhancedIOMissing, -26, "IO is not attached or Enhanced IO is not enabled.");
+S(LineNotOutput, -27,
+ "Cannot SetDigitalOutput for a line not configured for output.");
+S(ParameterOutOfRange, -28, "A parameter is out of range.");
+S(SPIClockRateTooLow, -29, "SPI clock rate was below the minimum supported");
+S(JaguarVersionError, -30, "Jaguar firmware version error");
+S(JaguarMessageNotFound, -31, "Jaguar message not found");
+S(NetworkTablesReadError, -40, "Error reading NetworkTables socket");
+S(NetworkTablesBufferFull, -41, "Buffer full writing to NetworkTables socket");
+S(NetworkTablesWrongType, -42,
+ "The wrong type was read from the NetworkTables entry");
+S(NetworkTablesCorrupt, -43, "NetworkTables data stream is corrupt");
+S(SmartDashboardMissingKey, -43, "SmartDashboard data does not exist");
+S(CommandIllegalUse, -50, "Illegal use of Command");
+S(UnsupportedInSimulation, -80, "Unsupported in simulation");
+S(CameraServerError, -90, "CameraServer error");
+
+/*
+ * Warnings
+ */
+S(SampleRateTooHigh, 1, "Analog module sample rate is too high");
+S(VoltageOutOfRange, 2,
+ "Voltage to convert to raw value is out of range [-10; 10]");
+S(CompressorTaskError, 3, "Compressor task won't start");
+S(LoopTimingError, 4, "Digital module loop timing is not the expected value");
+S(NonBinaryDigitalValue, 5, "Digital output value is not 0 or 1");
+S(IncorrectBatteryChannel, 6,
+ "Battery measurement channel is not correct value");
+S(BadJoystickIndex, 7, "Joystick index is out of range, should be 0-3");
+S(BadJoystickAxis, 8, "Joystick axis or POV is out of range");
+S(InvalidMotorIndex, 9, "Motor index is out of range, should be 0-3");
+S(DriverStationTaskError, 10, "Driver Station task won't start");
+S(EnhancedIOPWMPeriodOutOfRange, 11,
+ "Driver Station Enhanced IO PWM Output period out of range.");
+S(SPIWriteNoMOSI, 12, "Cannot write to SPI port with no MOSI output");
+S(SPIReadNoMISO, 13, "Cannot read from SPI port with no MISO input");
+S(SPIReadNoData, 14, "No data available to read from SPI");
+S(IncompatibleState, 15,
+ "Incompatible State: The operation cannot be completed");
+
+#undef S