Squashed 'third_party/allwpilib_2017/' content from commit 35ac87d
Change-Id: I7bb6f5556c30d3f5a092e68de0be9c710c60c9f4
git-subtree-dir: third_party/allwpilib_2017
git-subtree-split: 35ac87d6ff8b7f061c4f18c9ea316e5dccd4888a
diff --git a/wpilibc/athena/src/Victor.cpp b/wpilibc/athena/src/Victor.cpp
new file mode 100644
index 0000000..d06f091
--- /dev/null
+++ b/wpilibc/athena/src/Victor.cpp
@@ -0,0 +1,43 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) FIRST 2008-2017. All Rights Reserved. */
+/* Open Source Software - may be modified and shared by FRC teams. The code */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project. */
+/*----------------------------------------------------------------------------*/
+
+#include "Victor.h"
+
+#include "HAL/HAL.h"
+#include "LiveWindow/LiveWindow.h"
+
+using namespace frc;
+
+/**
+ * Constructor for a Victor.
+ *
+ * @param channel The PWM channel number that the Victor is attached to. 0-9
+ * are on-board, 10-19 are on the MXP port
+ */
+Victor::Victor(int channel) : PWMSpeedController(channel) {
+ /* Note that the Victor uses the following bounds for PWM values. These
+ * values were determined empirically and optimized for the Victor 888. These
+ * values should work reasonably well for Victor 884 controllers as well but
+ * if users experience issues such as asymmetric behaviour around the deadband
+ * or inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Victor 884 User
+ * Manual available from IFI.
+ *
+ * 2.027ms = full "forward"
+ * 1.525ms = the "high end" of the deadband range
+ * 1.507ms = center of the deadband range (off)
+ * 1.49ms = the "low end" of the deadband range
+ * 1.026ms = full "reverse"
+ */
+ SetBounds(2.027, 1.525, 1.507, 1.49, 1.026);
+ SetPeriodMultiplier(kPeriodMultiplier_2X);
+ SetSpeed(0.0);
+ SetZeroLatch();
+
+ LiveWindow::GetInstance()->AddActuator("Victor", GetChannel(), this);
+ HAL_Report(HALUsageReporting::kResourceType_Victor, GetChannel());
+}