Squashed 'third_party/allwpilib_2017/' content from commit 35ac87d
Change-Id: I7bb6f5556c30d3f5a092e68de0be9c710c60c9f4
git-subtree-dir: third_party/allwpilib_2017
git-subtree-split: 35ac87d6ff8b7f061c4f18c9ea316e5dccd4888a
diff --git a/hal/include/HAL/Errors.h b/hal/include/HAL/Errors.h
new file mode 100644
index 0000000..a31fa9f
--- /dev/null
+++ b/hal/include/HAL/Errors.h
@@ -0,0 +1,117 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) FIRST 2016-2017. All Rights Reserved. */
+/* Open Source Software - may be modified and shared by FRC teams. The code */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project. */
+/*----------------------------------------------------------------------------*/
+
+#pragma once
+
+#define CTR_RxTimeout_MESSAGE "CTRE CAN Receive Timeout"
+#define CTR_TxTimeout_MESSAGE "CTRE CAN Transmit Timeout"
+#define CTR_InvalidParamValue_MESSAGE "CTRE CAN Invalid Parameter"
+#define CTR_UnexpectedArbId_MESSAGE \
+ "CTRE Unexpected Arbitration ID (CAN Node ID)"
+#define CTR_TxFailed_MESSAGE "CTRE CAN Transmit Error"
+#define CTR_SigNotUpdated_MESSAGE "CTRE CAN Signal Not Updated"
+
+#define NiFpga_Status_FifoTimeout_MESSAGE "NIFPGA: FIFO timeout error"
+#define NiFpga_Status_TransferAborted_MESSAGE "NIFPGA: Transfer aborted error"
+#define NiFpga_Status_MemoryFull_MESSAGE \
+ "NIFPGA: Memory Allocation failed, memory full"
+#define NiFpga_Status_SoftwareFault_MESSAGE "NIFPGA: Unexpected software error"
+#define NiFpga_Status_InvalidParameter_MESSAGE "NIFPGA: Invalid Parameter"
+#define NiFpga_Status_ResourceNotFound_MESSAGE "NIFPGA: Resource not found"
+#define NiFpga_Status_ResourceNotInitialized_MESSAGE \
+ "NIFPGA: Resource not initialized"
+#define NiFpga_Status_HardwareFault_MESSAGE "NIFPGA: Hardware Fault"
+#define NiFpga_Status_IrqTimeout_MESSAGE "NIFPGA: Interrupt timeout"
+
+#define ERR_CANSessionMux_InvalidBuffer_MESSAGE "CAN: Invalid Buffer"
+#define ERR_CANSessionMux_MessageNotFound_MESSAGE "CAN: Message not found"
+#define WARN_CANSessionMux_NoToken_MESSAGE "CAN: No token"
+#define ERR_CANSessionMux_NotAllowed_MESSAGE "CAN: Not allowed"
+#define ERR_CANSessionMux_NotInitialized_MESSAGE "CAN: Not initialized"
+
+#define SAMPLE_RATE_TOO_HIGH 1001
+#define SAMPLE_RATE_TOO_HIGH_MESSAGE \
+ "HAL: Analog module sample rate is too high"
+#define VOLTAGE_OUT_OF_RANGE 1002
+#define VOLTAGE_OUT_OF_RANGE_MESSAGE \
+ "HAL: Voltage to convert to raw value is out of range [0; 5]"
+#define LOOP_TIMING_ERROR 1004
+#define LOOP_TIMING_ERROR_MESSAGE \
+ "HAL: Digital module loop timing is not the expected value"
+#define SPI_WRITE_NO_MOSI 1012
+#define SPI_WRITE_NO_MOSI_MESSAGE \
+ "HAL: Cannot write to SPI port with no MOSI output"
+#define SPI_READ_NO_MISO 1013
+#define SPI_READ_NO_MISO_MESSAGE \
+ "HAL: Cannot read from SPI port with no MISO input"
+#define SPI_READ_NO_DATA 1014
+#define SPI_READ_NO_DATA_MESSAGE "HAL: No data available to read from SPI"
+#define INCOMPATIBLE_STATE 1015
+#define INCOMPATIBLE_STATE_MESSAGE \
+ "HAL: Incompatible State: The operation cannot be completed"
+#define NO_AVAILABLE_RESOURCES -1004
+#define NO_AVAILABLE_RESOURCES_MESSAGE "HAL: No available resources to allocate"
+#define NULL_PARAMETER -1005
+#define NULL_PARAMETER_MESSAGE "HAL: A pointer parameter to a method is NULL"
+#define ANALOG_TRIGGER_LIMIT_ORDER_ERROR -1010
+#define ANALOG_TRIGGER_LIMIT_ORDER_ERROR_MESSAGE \
+ "HAL: AnalogTrigger limits error. Lower limit > Upper Limit"
+#define ANALOG_TRIGGER_PULSE_OUTPUT_ERROR -1011
+#define ANALOG_TRIGGER_PULSE_OUTPUT_ERROR_MESSAGE \
+ "HAL: Attempted to read AnalogTrigger pulse output."
+#define PARAMETER_OUT_OF_RANGE -1028
+#define PARAMETER_OUT_OF_RANGE_MESSAGE "HAL: A parameter is out of range."
+#define RESOURCE_IS_ALLOCATED -1029
+#define RESOURCE_IS_ALLOCATED_MESSAGE "HAL: Resource already allocated"
+#define RESOURCE_OUT_OF_RANGE -1030
+#define RESOURCE_OUT_OF_RANGE_MESSAGE \
+ "HAL: The requested resource is out of range."
+#define HAL_INVALID_ACCUMULATOR_CHANNEL -1035
+#define HAL_INVALID_ACCUMULATOR_CHANNEL_MESSAGE \
+ "HAL: The requested input is not an accumulator channel"
+#define HAL_COUNTER_NOT_SUPPORTED -1058
+#define HAL_COUNTER_NOT_SUPPORTED_MESSAGE \
+ "HAL: Counter mode not supported for encoder method"
+#define HAL_PWM_SCALE_ERROR -1072
+#define HAL_PWM_SCALE_ERROR_MESSAGE \
+ "HAL: The PWM Scale Factors are out of range"
+#define HAL_HANDLE_ERROR -1098
+#define HAL_HANDLE_ERROR_MESSAGE \
+ "HAL: A handle parameter was passed incorrectly"
+
+#define HAL_SERIAL_PORT_NOT_FOUND -1123
+#define HAL_SERIAL_PORT_NOT_FOUND_MESSAGE \
+ "HAL: The specified serial port device was not found"
+
+#define HAL_SERIAL_PORT_OPEN_ERROR -1124
+#define HAL_SERIAL_PORT_OPEN_ERROR_MESSAGE \
+ "HAL: The serial port could not be opened"
+
+#define HAL_SERIAL_PORT_ERROR -1125
+#define HAL_SERIAL_PORT_ERROR_MESSAGE \
+ "HAL: There was an error on the serial port"
+
+#define HAL_THREAD_PRIORITY_ERROR -1152
+#define HAL_THREAD_PRIORITY_ERROR_MESSAGE \
+ "HAL: Getting or setting the priority of a thread has failed";
+
+#define HAL_THREAD_PRIORITY_RANGE_ERROR -1153
+#define HAL_THREAD_PRIORITY_RANGE_ERROR_MESSAGE \
+ "HAL: The priority requested to be set is invalid"
+
+#define VI_ERROR_SYSTEM_ERROR_MESSAGE "HAL - VISA: System Error";
+#define VI_ERROR_INV_OBJECT_MESSAGE "HAL - VISA: Invalid Object"
+#define VI_ERROR_RSRC_LOCKED_MESSAGE "HAL - VISA: Resource Locked"
+#define VI_ERROR_RSRC_NFOUND_MESSAGE "HAL - VISA: Resource Not Found"
+#define VI_ERROR_INV_RSRC_NAME_MESSAGE "HAL - VISA: Invalid Resource Name"
+#define VI_ERROR_QUEUE_OVERFLOW_MESSAGE "HAL - VISA: Queue Overflow"
+#define VI_ERROR_IO_MESSAGE "HAL - VISA: General IO Error"
+#define VI_ERROR_ASRL_PARITY_MESSAGE "HAL - VISA: Parity Error"
+#define VI_ERROR_ASRL_FRAMING_MESSAGE "HAL - VISA: Framing Error"
+#define VI_ERROR_ASRL_OVERRUN_MESSAGE "HAL - VISA: Buffer Overrun Error"
+#define VI_ERROR_RSRC_BUSY_MESSAGE "HAL - VISA: Resource Busy"
+#define VI_ERROR_INV_PARAMETER_MESSAGE "HAL - VISA: Invalid Parameter"