diff --git a/rust/flatbuffers/Cargo.toml b/rust/flatbuffers/Cargo.toml
new file mode 100644
index 0000000..32d9b1b
--- /dev/null
+++ b/rust/flatbuffers/Cargo.toml
@@ -0,0 +1,13 @@
+[package]
+name = "flatbuffers"
+version = "0.6.0"
+authors = ["Robert Winslow <hello@rwinslow.com>", "FlatBuffers Maintainers"]
+license = "Apache-2.0"
+description = "Official FlatBuffers Rust runtime library."
+homepage = "https://google.github.io/flatbuffers/"
+repository = "https://github.com/google/flatbuffers"
+keywords = ["flatbuffers", "serialization", "zero-copy"]
+categories = ["encoding", "data-structures", "memory-management"]
+
+[dependencies]
+smallvec = "0.6"
diff --git a/rust/flatbuffers/src/builder.rs b/rust/flatbuffers/src/builder.rs
new file mode 100644
index 0000000..36d6c6a
--- /dev/null
+++ b/rust/flatbuffers/src/builder.rs
@@ -0,0 +1,701 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+extern crate smallvec;
+
+use std::cmp::max;
+use std::marker::PhantomData;
+use std::ptr::write_bytes;
+use std::slice::from_raw_parts;
+
+use endian_scalar::{emplace_scalar, read_scalar_at};
+use primitives::*;
+use push::{Push, PushAlignment};
+use table::Table;
+use vector::{SafeSliceAccess, Vector};
+use vtable::{field_index_to_field_offset, VTable};
+use vtable_writer::VTableWriter;
+
+pub const N_SMALLVEC_STRING_VECTOR_CAPACITY: usize = 16;
+
+#[derive(Clone, Copy, Debug, Eq, PartialEq)]
+struct FieldLoc {
+    off: UOffsetT,
+    id: VOffsetT,
+}
+
+/// FlatBufferBuilder builds a FlatBuffer through manipulating its internal
+/// state. It has an owned `Vec<u8>` that grows as needed (up to the hardcoded
+/// limit of 2GiB, which is set by the FlatBuffers format).
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct FlatBufferBuilder<'fbb> {
+    owned_buf: Vec<u8>,
+    head: usize,
+
+    field_locs: Vec<FieldLoc>,
+    written_vtable_revpos: Vec<UOffsetT>,
+
+    nested: bool,
+    finished: bool,
+
+    min_align: usize,
+
+    _phantom: PhantomData<&'fbb ()>,
+}
+
+impl<'fbb> FlatBufferBuilder<'fbb> {
+    /// Create a FlatBufferBuilder that is ready for writing.
+    pub fn new() -> Self {
+        Self::new_with_capacity(0)
+    }
+
+    /// Create a FlatBufferBuilder that is ready for writing, with a
+    /// ready-to-use capacity of the provided size.
+    ///
+    /// The maximum valid value is `FLATBUFFERS_MAX_BUFFER_SIZE`.
+    pub fn new_with_capacity(size: usize) -> Self {
+        // we need to check the size here because we create the backing buffer
+        // directly, bypassing the typical way of using grow_owned_buf:
+        assert!(
+            size <= FLATBUFFERS_MAX_BUFFER_SIZE,
+            "cannot initialize buffer bigger than 2 gigabytes"
+        );
+
+        FlatBufferBuilder {
+            owned_buf: vec![0u8; size],
+            head: size,
+
+            field_locs: Vec::new(),
+            written_vtable_revpos: Vec::new(),
+
+            nested: false,
+            finished: false,
+
+            min_align: 0,
+
+            _phantom: PhantomData,
+        }
+    }
+
+    /// Reset the FlatBufferBuilder internal state. Use this method after a
+    /// call to a `finish` function in order to re-use a FlatBufferBuilder.
+    ///
+    /// This function is the only way to reset the `finished` state and start
+    /// again.
+    ///
+    /// If you are using a FlatBufferBuilder repeatedly, make sure to use this
+    /// function, because it re-uses the FlatBufferBuilder's existing
+    /// heap-allocated `Vec<u8>` internal buffer. This offers significant speed
+    /// improvements as compared to creating a new FlatBufferBuilder for every
+    /// new object.
+    pub fn reset(&mut self) {
+        // memset only the part of the buffer that could be dirty:
+        {
+            let to_clear = self.owned_buf.len() - self.head;
+            let ptr = (&mut self.owned_buf[self.head..]).as_mut_ptr();
+            unsafe {
+                write_bytes(ptr, 0, to_clear);
+            }
+        }
+
+        self.head = self.owned_buf.len();
+        self.written_vtable_revpos.clear();
+
+        self.nested = false;
+        self.finished = false;
+
+        self.min_align = 0;
+    }
+
+    /// Destroy the FlatBufferBuilder, returning its internal byte vector
+    /// and the index into it that represents the start of valid data.
+    pub fn collapse(self) -> (Vec<u8>, usize) {
+        (self.owned_buf, self.head)
+    }
+
+    /// Push a Push'able value onto the front of the in-progress data.
+    ///
+    /// This function uses traits to provide a unified API for writing
+    /// scalars, tables, vectors, and WIPOffsets.
+    #[inline]
+    pub fn push<P: Push>(&mut self, x: P) -> WIPOffset<P::Output> {
+        let sz = P::size();
+        self.align(sz, P::alignment());
+        self.make_space(sz);
+        {
+            let (dst, rest) = (&mut self.owned_buf[self.head..]).split_at_mut(sz);
+            x.push(dst, rest);
+        }
+        WIPOffset::new(self.used_space() as UOffsetT)
+    }
+
+    /// Push a Push'able value onto the front of the in-progress data, and
+    /// store a reference to it in the in-progress vtable. If the value matches
+    /// the default, then this is a no-op.
+    #[inline]
+    pub fn push_slot<X: Push + PartialEq>(&mut self, slotoff: VOffsetT, x: X, default: X) {
+        self.assert_nested("push_slot");
+        if x == default {
+            return;
+        }
+        self.push_slot_always(slotoff, x);
+    }
+
+    /// Push a Push'able value onto the front of the in-progress data, and
+    /// store a reference to it in the in-progress vtable.
+    #[inline]
+    pub fn push_slot_always<X: Push>(&mut self, slotoff: VOffsetT, x: X) {
+        self.assert_nested("push_slot_always");
+        let off = self.push(x);
+        self.track_field(slotoff, off.value());
+    }
+
+    /// Retrieve the number of vtables that have been serialized into the
+    /// FlatBuffer. This is primarily used to check vtable deduplication.
+    #[inline]
+    pub fn num_written_vtables(&self) -> usize {
+        self.written_vtable_revpos.len()
+    }
+
+    /// Start a Table write.
+    ///
+    /// Asserts that the builder is not in a nested state.
+    ///
+    /// Users probably want to use `push_slot` to add values after calling this.
+    #[inline]
+    pub fn start_table(&mut self) -> WIPOffset<TableUnfinishedWIPOffset> {
+        self.assert_not_nested(
+            "start_table can not be called when a table or vector is under construction",
+        );
+        self.nested = true;
+
+        WIPOffset::new(self.used_space() as UOffsetT)
+    }
+
+    /// End a Table write.
+    ///
+    /// Asserts that the builder is in a nested state.
+    #[inline]
+    pub fn end_table(
+        &mut self,
+        off: WIPOffset<TableUnfinishedWIPOffset>,
+    ) -> WIPOffset<TableFinishedWIPOffset> {
+        self.assert_nested("end_table");
+
+        let o = self.write_vtable(off);
+
+        self.nested = false;
+        self.field_locs.clear();
+
+        WIPOffset::new(o.value())
+    }
+
+    /// Start a Vector write.
+    ///
+    /// Asserts that the builder is not in a nested state.
+    ///
+    /// Most users will prefer to call `create_vector`.
+    /// Speed optimizing users who choose to create vectors manually using this
+    /// function will want to use `push` to add values.
+    #[inline]
+    pub fn start_vector<T: Push>(&mut self, num_items: usize) {
+        self.assert_not_nested(
+            "start_vector can not be called when a table or vector is under construction",
+        );
+        self.nested = true;
+        self.align(num_items * T::size(), T::alignment().max_of(SIZE_UOFFSET));
+    }
+
+    /// End a Vector write.
+    ///
+    /// Note that the `num_elems` parameter is the number of written items, not
+    /// the byte count.
+    ///
+    /// Asserts that the builder is in a nested state.
+    #[inline]
+    pub fn end_vector<T: Push>(&mut self, num_elems: usize) -> WIPOffset<Vector<'fbb, T>> {
+        self.assert_nested("end_vector");
+        self.nested = false;
+        let o = self.push::<UOffsetT>(num_elems as UOffsetT);
+        WIPOffset::new(o.value())
+    }
+
+    /// Create a utf8 string.
+    ///
+    /// The wire format represents this as a zero-terminated byte vector.
+    #[inline]
+    pub fn create_string<'a: 'b, 'b>(&'a mut self, s: &'b str) -> WIPOffset<&'fbb str> {
+        self.assert_not_nested(
+            "create_string can not be called when a table or vector is under construction",
+        );
+        WIPOffset::new(self.create_byte_string(s.as_bytes()).value())
+    }
+
+    /// Create a zero-terminated byte vector.
+    #[inline]
+    pub fn create_byte_string(&mut self, data: &[u8]) -> WIPOffset<&'fbb [u8]> {
+        self.assert_not_nested(
+            "create_byte_string can not be called when a table or vector is under construction",
+        );
+        self.align(data.len() + 1, PushAlignment::new(SIZE_UOFFSET));
+        self.push(0u8);
+        self.push_bytes_unprefixed(data);
+        self.push(data.len() as UOffsetT);
+        WIPOffset::new(self.used_space() as UOffsetT)
+    }
+
+    /// Create a vector by memcpy'ing. This is much faster than calling
+    /// `create_vector`, but the underlying type must be represented as
+    /// little-endian on the host machine. This property is encoded in the
+    /// type system through the SafeSliceAccess trait. The following types are
+    /// always safe, on any platform: bool, u8, i8, and any
+    /// FlatBuffers-generated struct.
+    #[inline]
+    pub fn create_vector_direct<'a: 'b, 'b, T: SafeSliceAccess + Push + Sized + 'b>(
+        &'a mut self,
+        items: &'b [T],
+    ) -> WIPOffset<Vector<'fbb, T>> {
+        self.assert_not_nested(
+            "create_vector_direct can not be called when a table or vector is under construction",
+        );
+        let elem_size = T::size();
+        self.align(items.len() * elem_size, T::alignment().max_of(SIZE_UOFFSET));
+
+        let bytes = {
+            let ptr = items.as_ptr() as *const T as *const u8;
+            unsafe { from_raw_parts(ptr, items.len() * elem_size) }
+        };
+        self.push_bytes_unprefixed(bytes);
+        self.push(items.len() as UOffsetT);
+
+        WIPOffset::new(self.used_space() as UOffsetT)
+    }
+
+    /// Create a vector of strings.
+    ///
+    /// Speed-sensitive users may wish to reduce memory usage by creating the
+    /// vector manually: use `start_vector`, `push`, and `end_vector`.
+    #[inline]
+    pub fn create_vector_of_strings<'a, 'b>(
+        &'a mut self,
+        xs: &'b [&'b str],
+    ) -> WIPOffset<Vector<'fbb, ForwardsUOffset<&'fbb str>>> {
+        self.assert_not_nested("create_vector_of_strings can not be called when a table or vector is under construction");
+        // internally, smallvec can be a stack-allocated or heap-allocated vector:
+        // if xs.len() > N_SMALLVEC_STRING_VECTOR_CAPACITY then it will overflow to the heap.
+        let mut offsets: smallvec::SmallVec<[WIPOffset<&str>; N_SMALLVEC_STRING_VECTOR_CAPACITY]> =
+            smallvec::SmallVec::with_capacity(xs.len());
+        unsafe {
+            offsets.set_len(xs.len());
+        }
+
+        // note that this happens in reverse, because the buffer is built back-to-front:
+        for (i, &s) in xs.iter().enumerate().rev() {
+            let o = self.create_string(s);
+            offsets[i] = o;
+        }
+        self.create_vector(&offsets[..])
+    }
+
+    /// Create a vector of Push-able objects.
+    ///
+    /// Speed-sensitive users may wish to reduce memory usage by creating the
+    /// vector manually: use `start_vector`, `push`, and `end_vector`.
+    #[inline]
+    pub fn create_vector<'a: 'b, 'b, T: Push + Copy + 'b>(
+        &'a mut self,
+        items: &'b [T],
+    ) -> WIPOffset<Vector<'fbb, T::Output>> {
+        let elem_size = T::size();
+        self.align(items.len() * elem_size, T::alignment().max_of(SIZE_UOFFSET));
+        for i in (0..items.len()).rev() {
+            self.push(items[i]);
+        }
+        WIPOffset::new(self.push::<UOffsetT>(items.len() as UOffsetT).value())
+    }
+
+    /// Get the byte slice for the data that has been written, regardless of
+    /// whether it has been finished.
+    #[inline]
+    pub fn unfinished_data(&self) -> &[u8] {
+        &self.owned_buf[self.head..]
+    }
+    /// Get the byte slice for the data that has been written after a call to
+    /// one of the `finish` functions.
+    #[inline]
+    pub fn finished_data(&self) -> &[u8] {
+        self.assert_finished("finished_bytes cannot be called when the buffer is not yet finished");
+        &self.owned_buf[self.head..]
+    }
+    /// Assert that a field is present in the just-finished Table.
+    ///
+    /// This is somewhat low-level and is mostly used by the generated code.
+    #[inline]
+    pub fn required(
+        &self,
+        tab_revloc: WIPOffset<TableFinishedWIPOffset>,
+        slot_byte_loc: VOffsetT,
+        assert_msg_name: &'static str,
+    ) {
+        let idx = self.used_space() - tab_revloc.value() as usize;
+        let tab = Table::new(&self.owned_buf[self.head..], idx);
+        let o = tab.vtable().get(slot_byte_loc) as usize;
+        assert!(o != 0, "missing required field {}", assert_msg_name);
+    }
+
+    /// Finalize the FlatBuffer by: aligning it, pushing an optional file
+    /// identifier on to it, pushing a size prefix on to it, and marking the
+    /// internal state of the FlatBufferBuilder as `finished`. Afterwards,
+    /// users can call `finished_data` to get the resulting data.
+    #[inline]
+    pub fn finish_size_prefixed<T>(&mut self, root: WIPOffset<T>, file_identifier: Option<&str>) {
+        self.finish_with_opts(root, file_identifier, true);
+    }
+
+    /// Finalize the FlatBuffer by: aligning it, pushing an optional file
+    /// identifier on to it, and marking the internal state of the
+    /// FlatBufferBuilder as `finished`. Afterwards, users can call
+    /// `finished_data` to get the resulting data.
+    #[inline]
+    pub fn finish<T>(&mut self, root: WIPOffset<T>, file_identifier: Option<&str>) {
+        self.finish_with_opts(root, file_identifier, false);
+    }
+
+    /// Finalize the FlatBuffer by: aligning it and marking the internal state
+    /// of the FlatBufferBuilder as `finished`. Afterwards, users can call
+    /// `finished_data` to get the resulting data.
+    #[inline]
+    pub fn finish_minimal<T>(&mut self, root: WIPOffset<T>) {
+        self.finish_with_opts(root, None, false);
+    }
+
+    #[inline]
+    fn used_space(&self) -> usize {
+        self.owned_buf.len() - self.head as usize
+    }
+
+    #[inline]
+    fn track_field(&mut self, slot_off: VOffsetT, off: UOffsetT) {
+        let fl = FieldLoc {
+            id: slot_off,
+            off: off,
+        };
+        self.field_locs.push(fl);
+    }
+
+    /// Write the VTable, if it is new.
+    fn write_vtable(
+        &mut self,
+        table_tail_revloc: WIPOffset<TableUnfinishedWIPOffset>,
+    ) -> WIPOffset<VTableWIPOffset> {
+        self.assert_nested("write_vtable");
+
+        // Write the vtable offset, which is the start of any Table.
+        // We fill its value later.
+        let object_revloc_to_vtable: WIPOffset<VTableWIPOffset> =
+            WIPOffset::new(self.push::<UOffsetT>(0xF0F0F0F0 as UOffsetT).value());
+
+        // Layout of the data this function will create when a new vtable is
+        // needed.
+        // --------------------------------------------------------------------
+        // vtable starts here
+        // | x, x -- vtable len (bytes) [u16]
+        // | x, x -- object inline len (bytes) [u16]
+        // | x, x -- zero, or num bytes from start of object to field #0   [u16]
+        // | ...
+        // | x, x -- zero, or num bytes from start of object to field #n-1 [u16]
+        // vtable ends here
+        // table starts here
+        // | x, x, x, x -- offset (negative direction) to the vtable [i32]
+        // |               aka "vtableoffset"
+        // | -- table inline data begins here, we don't touch it --
+        // table ends here -- aka "table_start"
+        // --------------------------------------------------------------------
+        //
+        // Layout of the data this function will create when we re-use an
+        // existing vtable.
+        //
+        // We always serialize this particular vtable, then compare it to the
+        // other vtables we know about to see if there is a duplicate. If there
+        // is, then we erase the serialized vtable we just made.
+        // We serialize it first so that we are able to do byte-by-byte
+        // comparisons with already-serialized vtables. This 1) saves
+        // bookkeeping space (we only keep revlocs to existing vtables), 2)
+        // allows us to convert to little-endian once, then do
+        // fast memcmp comparisons, and 3) by ensuring we are comparing real
+        // serialized vtables, we can be more assured that we are doing the
+        // comparisons correctly.
+        //
+        // --------------------------------------------------------------------
+        // table starts here
+        // | x, x, x, x -- offset (negative direction) to an existing vtable [i32]
+        // |               aka "vtableoffset"
+        // | -- table inline data begins here, we don't touch it --
+        // table starts here: aka "table_start"
+        // --------------------------------------------------------------------
+
+        // fill the WIP vtable with zeros:
+        let vtable_byte_len = get_vtable_byte_len(&self.field_locs);
+        self.make_space(vtable_byte_len);
+
+        // compute the length of the table (not vtable!) in bytes:
+        let table_object_size = object_revloc_to_vtable.value() - table_tail_revloc.value();
+        debug_assert!(table_object_size < 0x10000); // vTable use 16bit offsets.
+
+        // Write the VTable (we may delete it afterwards, if it is a duplicate):
+        let vt_start_pos = self.head;
+        let vt_end_pos = self.head + vtable_byte_len;
+        {
+            // write the vtable header:
+            let vtfw = &mut VTableWriter::init(&mut self.owned_buf[vt_start_pos..vt_end_pos]);
+            vtfw.write_vtable_byte_length(vtable_byte_len as VOffsetT);
+            vtfw.write_object_inline_size(table_object_size as VOffsetT);
+
+            // serialize every FieldLoc to the vtable:
+            for &fl in self.field_locs.iter() {
+                let pos: VOffsetT = (object_revloc_to_vtable.value() - fl.off) as VOffsetT;
+                debug_assert_eq!(
+                    vtfw.get_field_offset(fl.id),
+                    0,
+                    "tried to write a vtable field multiple times"
+                );
+                vtfw.write_field_offset(fl.id, pos);
+            }
+        }
+        let dup_vt_use = {
+            let this_vt = VTable::init(&self.owned_buf[..], self.head);
+            self.find_duplicate_stored_vtable_revloc(this_vt)
+        };
+
+        let vt_use = match dup_vt_use {
+            Some(n) => {
+                VTableWriter::init(&mut self.owned_buf[vt_start_pos..vt_end_pos]).clear();
+                self.head += vtable_byte_len;
+                n
+            }
+            None => {
+                let new_vt_use = self.used_space() as UOffsetT;
+                self.written_vtable_revpos.push(new_vt_use);
+                new_vt_use
+            }
+        };
+
+        {
+            let n = self.head + self.used_space() - object_revloc_to_vtable.value() as usize;
+            let saw = read_scalar_at::<UOffsetT>(&self.owned_buf, n);
+            debug_assert_eq!(saw, 0xF0F0F0F0);
+            emplace_scalar::<SOffsetT>(
+                &mut self.owned_buf[n..n + SIZE_SOFFSET],
+                vt_use as SOffsetT - object_revloc_to_vtable.value() as SOffsetT,
+            );
+        }
+
+        self.field_locs.clear();
+
+        object_revloc_to_vtable
+    }
+
+    #[inline]
+    fn find_duplicate_stored_vtable_revloc(&self, needle: VTable) -> Option<UOffsetT> {
+        for &revloc in self.written_vtable_revpos.iter().rev() {
+            let o = VTable::init(
+                &self.owned_buf[..],
+                self.head + self.used_space() - revloc as usize,
+            );
+            if needle == o {
+                return Some(revloc);
+            }
+        }
+        None
+    }
+
+    // Only call this when you know it is safe to double the size of the buffer.
+    #[inline]
+    fn grow_owned_buf(&mut self) {
+        let old_len = self.owned_buf.len();
+        let new_len = max(1, old_len * 2);
+
+        let starting_active_size = self.used_space();
+
+        let diff = new_len - old_len;
+        self.owned_buf.resize(new_len, 0);
+        self.head += diff;
+
+        let ending_active_size = self.used_space();
+        debug_assert_eq!(starting_active_size, ending_active_size);
+
+        if new_len == 1 {
+            return;
+        }
+
+        // calculate the midpoint, and safely copy the old end data to the new
+        // end position:
+        let middle = new_len / 2;
+        {
+            let (left, right) = &mut self.owned_buf[..].split_at_mut(middle);
+            right.copy_from_slice(left);
+        }
+        // finally, zero out the old end data.
+        {
+            let ptr = (&mut self.owned_buf[..middle]).as_mut_ptr();
+            unsafe {
+                write_bytes(ptr, 0, middle);
+            }
+        }
+    }
+
+    // with or without a size prefix changes how we load the data, so finish*
+    // functions are split along those lines.
+    fn finish_with_opts<T>(
+        &mut self,
+        root: WIPOffset<T>,
+        file_identifier: Option<&str>,
+        size_prefixed: bool,
+    ) {
+        self.assert_not_finished("buffer cannot be finished when it is already finished");
+        self.assert_not_nested(
+            "buffer cannot be finished when a table or vector is under construction",
+        );
+        self.written_vtable_revpos.clear();
+
+        let to_align = {
+            // for the root offset:
+            let a = SIZE_UOFFSET;
+            // for the size prefix:
+            let b = if size_prefixed { SIZE_UOFFSET } else { 0 };
+            // for the file identifier (a string that is not zero-terminated):
+            let c = if file_identifier.is_some() {
+                FILE_IDENTIFIER_LENGTH
+            } else {
+                0
+            };
+            a + b + c
+        };
+
+        {
+            let ma = PushAlignment::new(self.min_align);
+            self.align(to_align, ma);
+        }
+
+        if let Some(ident) = file_identifier {
+            debug_assert_eq!(ident.len(), FILE_IDENTIFIER_LENGTH);
+            self.push_bytes_unprefixed(ident.as_bytes());
+        }
+
+        self.push(root);
+
+        if size_prefixed {
+            let sz = self.used_space() as UOffsetT;
+            self.push::<UOffsetT>(sz);
+        }
+        self.finished = true;
+    }
+
+    #[inline]
+    fn align(&mut self, len: usize, alignment: PushAlignment) {
+        self.track_min_align(alignment.value());
+        let s = self.used_space() as usize;
+        self.make_space(padding_bytes(s + len, alignment.value()));
+    }
+
+    #[inline]
+    fn track_min_align(&mut self, alignment: usize) {
+        self.min_align = max(self.min_align, alignment);
+    }
+
+    #[inline]
+    fn push_bytes_unprefixed(&mut self, x: &[u8]) -> UOffsetT {
+        let n = self.make_space(x.len());
+        &mut self.owned_buf[n..n + x.len()].copy_from_slice(x);
+
+        n as UOffsetT
+    }
+
+    #[inline]
+    fn make_space(&mut self, want: usize) -> usize {
+        self.ensure_capacity(want);
+        self.head -= want;
+        self.head
+    }
+
+    #[inline]
+    fn ensure_capacity(&mut self, want: usize) -> usize {
+        if self.unused_ready_space() >= want {
+            return want;
+        }
+        assert!(
+            want <= FLATBUFFERS_MAX_BUFFER_SIZE,
+            "cannot grow buffer beyond 2 gigabytes"
+        );
+
+        while self.unused_ready_space() < want {
+            self.grow_owned_buf();
+        }
+        want
+    }
+    #[inline]
+    fn unused_ready_space(&self) -> usize {
+        self.head
+    }
+    #[inline]
+    fn assert_nested(&self, fn_name: &'static str) {
+        // we don't assert that self.field_locs.len() >0 because the vtable
+        // could be empty (e.g. for empty tables, or for all-default values).
+        debug_assert!(
+            self.nested,
+            format!(
+                "incorrect FlatBufferBuilder usage: {} must be called while in a nested state",
+                fn_name
+            )
+        );
+    }
+    #[inline]
+    fn assert_not_nested(&self, msg: &'static str) {
+        debug_assert!(!self.nested, msg);
+    }
+    #[inline]
+    fn assert_finished(&self, msg: &'static str) {
+        debug_assert!(self.finished, msg);
+    }
+    #[inline]
+    fn assert_not_finished(&self, msg: &'static str) {
+        debug_assert!(!self.finished, msg);
+    }
+}
+
+/// Compute the length of the vtable needed to represent the provided FieldLocs.
+/// If there are no FieldLocs, then provide the minimum number of bytes
+/// required: enough to write the VTable header.
+#[inline]
+fn get_vtable_byte_len(field_locs: &[FieldLoc]) -> usize {
+    let max_voffset = field_locs.iter().map(|fl| fl.id).max();
+    match max_voffset {
+        None => field_index_to_field_offset(0) as usize,
+        Some(mv) => mv as usize + SIZE_VOFFSET,
+    }
+}
+
+#[inline]
+fn padding_bytes(buf_size: usize, scalar_size: usize) -> usize {
+    // ((!buf_size) + 1) & (scalar_size - 1)
+    (!buf_size).wrapping_add(1) & (scalar_size.wrapping_sub(1))
+}
+
+impl<'fbb> Default for FlatBufferBuilder<'fbb> {
+    fn default() -> Self {
+        Self::new_with_capacity(0)
+    }
+}
diff --git a/rust/flatbuffers/src/endian_scalar.rs b/rust/flatbuffers/src/endian_scalar.rs
new file mode 100644
index 0000000..df0b384
--- /dev/null
+++ b/rust/flatbuffers/src/endian_scalar.rs
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::mem::size_of;
+
+/// Trait for values that must be stored in little-endian byte order, but
+/// might be represented in memory as big-endian. Every type that implements
+/// EndianScalar is a valid FlatBuffers scalar value.
+///
+/// The Rust stdlib does not provide a trait to represent scalars, so this trait
+/// serves that purpose, too.
+///
+/// Note that we do not use the num-traits crate for this, because it provides
+/// "too much". For example, num-traits provides i128 support, but that is an
+/// invalid FlatBuffers type.
+pub trait EndianScalar: Sized + PartialEq + Copy + Clone {
+    fn to_little_endian(self) -> Self;
+    fn from_little_endian(self) -> Self;
+}
+
+/// Macro for implementing a no-op endian conversion. This is used for types
+/// that are one byte wide.
+macro_rules! impl_endian_scalar_noop {
+    ($ty:ident) => {
+        impl EndianScalar for $ty {
+            #[inline]
+            fn to_little_endian(self) -> Self {
+                self
+            }
+            #[inline]
+            fn from_little_endian(self) -> Self {
+                self
+            }
+        }
+    };
+}
+
+/// Macro for implementing an endian conversion using the stdlib `to_le` and
+/// `from_le` functions. This is used for integer types. It is not used for
+/// floats, because the `to_le` and `from_le` are not implemented for them in
+/// the stdlib.
+macro_rules! impl_endian_scalar_stdlib_le_conversion {
+    ($ty:ident) => {
+        impl EndianScalar for $ty {
+            #[inline]
+            fn to_little_endian(self) -> Self {
+                Self::to_le(self)
+            }
+            #[inline]
+            fn from_little_endian(self) -> Self {
+                Self::from_le(self)
+            }
+        }
+    };
+}
+
+impl_endian_scalar_noop!(bool);
+impl_endian_scalar_noop!(u8);
+impl_endian_scalar_noop!(i8);
+
+impl_endian_scalar_stdlib_le_conversion!(u16);
+impl_endian_scalar_stdlib_le_conversion!(u32);
+impl_endian_scalar_stdlib_le_conversion!(u64);
+impl_endian_scalar_stdlib_le_conversion!(i16);
+impl_endian_scalar_stdlib_le_conversion!(i32);
+impl_endian_scalar_stdlib_le_conversion!(i64);
+
+impl EndianScalar for f32 {
+    /// Convert f32 from host endian-ness to little-endian.
+    #[inline]
+    fn to_little_endian(self) -> Self {
+        #[cfg(target_endian = "little")]
+        {
+            self
+        }
+        #[cfg(not(target_endian = "little"))]
+        {
+            byte_swap_f32(self)
+        }
+    }
+    /// Convert f32 from little-endian to host endian-ness.
+    #[inline]
+    fn from_little_endian(self) -> Self {
+        #[cfg(target_endian = "little")]
+        {
+            self
+        }
+        #[cfg(not(target_endian = "little"))]
+        {
+            byte_swap_f32(self)
+        }
+    }
+}
+
+impl EndianScalar for f64 {
+    /// Convert f64 from host endian-ness to little-endian.
+    #[inline]
+    fn to_little_endian(self) -> Self {
+        #[cfg(target_endian = "little")]
+        {
+            self
+        }
+        #[cfg(not(target_endian = "little"))]
+        {
+            byte_swap_f64(self)
+        }
+    }
+    /// Convert f64 from little-endian to host endian-ness.
+    #[inline]
+    fn from_little_endian(self) -> Self {
+        #[cfg(target_endian = "little")]
+        {
+            self
+        }
+        #[cfg(not(target_endian = "little"))]
+        {
+            byte_swap_f64(self)
+        }
+    }
+}
+
+/// Swaps the bytes of an f32.
+#[allow(dead_code)]
+#[inline]
+pub fn byte_swap_f32(x: f32) -> f32 {
+    f32::from_bits(x.to_bits().swap_bytes())
+}
+
+/// Swaps the bytes of an f64.
+#[allow(dead_code)]
+#[inline]
+pub fn byte_swap_f64(x: f64) -> f64 {
+    f64::from_bits(x.to_bits().swap_bytes())
+}
+
+/// Place an EndianScalar into the provided mutable byte slice. Performs
+/// endian conversion, if necessary.
+#[inline]
+pub fn emplace_scalar<T: EndianScalar>(s: &mut [u8], x: T) {
+    let sz = size_of::<T>();
+    let mut_ptr = (&mut s[..sz]).as_mut_ptr() as *mut T;
+    let val = x.to_little_endian();
+    unsafe {
+        *mut_ptr = val;
+    }
+}
+
+/// Read an EndianScalar from the provided byte slice at the specified location.
+/// Performs endian conversion, if necessary.
+#[inline]
+pub fn read_scalar_at<T: EndianScalar>(s: &[u8], loc: usize) -> T {
+    let buf = &s[loc..loc + size_of::<T>()];
+    read_scalar(buf)
+}
+
+/// Read an EndianScalar from the provided byte slice. Performs endian
+/// conversion, if necessary.
+#[inline]
+pub fn read_scalar<T: EndianScalar>(s: &[u8]) -> T {
+    let sz = size_of::<T>();
+
+    let p = (&s[..sz]).as_ptr() as *const T;
+    let x = unsafe { *p };
+
+    x.from_little_endian()
+}
diff --git a/rust/flatbuffers/src/follow.rs b/rust/flatbuffers/src/follow.rs
new file mode 100644
index 0000000..4d3eff7
--- /dev/null
+++ b/rust/flatbuffers/src/follow.rs
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::marker::PhantomData;
+
+/// Follow is a trait that allows us to access FlatBuffers in a declarative,
+/// type safe, and fast way. They compile down to almost no code (after
+/// optimizations). Conceptually, Follow lifts the offset-based access
+/// patterns of FlatBuffers data into the type system. This trait is used
+/// pervasively at read time, to access tables, vtables, vectors, strings, and
+/// all other data. At this time, Follow is not utilized much on the write
+/// path.
+///
+/// Writing a new Follow implementation primarily involves deciding whether
+/// you want to return data (of the type Self::Inner) or do you want to
+/// continue traversing the FlatBuffer.
+pub trait Follow<'a> {
+    type Inner;
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner;
+}
+
+/// Execute a follow as a top-level function.
+#[allow(dead_code)]
+#[inline]
+pub fn lifted_follow<'a, T: Follow<'a>>(buf: &'a [u8], loc: usize) -> T::Inner {
+    T::follow(buf, loc)
+}
+
+/// FollowStart wraps a Follow impl in a struct type. This can make certain
+/// programming patterns more ergonomic.
+#[derive(Debug)]
+pub struct FollowStart<T>(PhantomData<T>);
+impl<'a, T: Follow<'a> + 'a> FollowStart<T> {
+    #[inline]
+    pub fn new() -> Self {
+        Self { 0: PhantomData }
+    }
+    #[inline]
+    pub fn self_follow(&'a self, buf: &'a [u8], loc: usize) -> T::Inner {
+        T::follow(buf, loc)
+    }
+}
+impl<'a, T: Follow<'a>> Follow<'a> for FollowStart<T> {
+    type Inner = T::Inner;
+    #[inline]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        T::follow(buf, loc)
+    }
+}
diff --git a/rust/flatbuffers/src/lib.rs b/rust/flatbuffers/src/lib.rs
new file mode 100644
index 0000000..ef54132
--- /dev/null
+++ b/rust/flatbuffers/src/lib.rs
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//! # FlatBuffers
+//!
+//! A library for memory-efficient serialization of data.
+//!
+//! This crate provides runtime support for the FlatBuffers format in the Rust programming language.
+//! To use this crate, first generate code with the `flatc` compiler, as described here: https://google.github.io/flatbuffers/
+//! Then, include that code into your project.
+//! Finally, add this crate to your `Cargo.toml`.
+//!
+//! At this time, Rust support is experimental, and APIs may change between minor versions.
+//!
+//! At this time, to generate Rust code, you will need the latest `master` version of `flatc`, available from here: https://github.com/google/flatbuffers
+//! (On OSX, you can install FlatBuffers from `HEAD` with the Homebrew package manager.)
+
+mod builder;
+mod endian_scalar;
+mod follow;
+mod primitives;
+mod push;
+mod table;
+mod vector;
+mod vtable;
+mod vtable_writer;
+
+pub use builder::FlatBufferBuilder;
+pub use endian_scalar::{
+    byte_swap_f32, byte_swap_f64, emplace_scalar, read_scalar, read_scalar_at, EndianScalar,
+};
+pub use follow::{Follow, FollowStart};
+pub use primitives::*;
+pub use push::Push;
+pub use table::{buffer_has_identifier, get_root, get_size_prefixed_root, Table};
+pub use vector::{follow_cast_ref, SafeSliceAccess, Vector};
+pub use vtable::field_index_to_field_offset;
+
+// TODO(rw): Unify `create_vector` and `create_vector_direct` by using
+//           `Into<Vector<...>>`.
+// TODO(rw): Split fill ops in builder into fill_small, fill_big like in C++.
diff --git a/rust/flatbuffers/src/primitives.rs b/rust/flatbuffers/src/primitives.rs
new file mode 100644
index 0000000..cfd4140
--- /dev/null
+++ b/rust/flatbuffers/src/primitives.rs
@@ -0,0 +1,298 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::marker::PhantomData;
+use std::mem::size_of;
+use std::ops::Deref;
+
+use endian_scalar::{emplace_scalar, read_scalar, read_scalar_at};
+use follow::Follow;
+use push::Push;
+
+pub const FLATBUFFERS_MAX_BUFFER_SIZE: usize = (1u64 << 31) as usize;
+
+pub const FILE_IDENTIFIER_LENGTH: usize = 4;
+
+pub const VTABLE_METADATA_FIELDS: usize = 2;
+
+pub const SIZE_U8: usize = size_of::<u8>();
+pub const SIZE_I8: usize = size_of::<i8>();
+
+pub const SIZE_U16: usize = size_of::<u16>();
+pub const SIZE_I16: usize = size_of::<i16>();
+
+pub const SIZE_U32: usize = size_of::<u32>();
+pub const SIZE_I32: usize = size_of::<i32>();
+
+pub const SIZE_U64: usize = size_of::<u64>();
+pub const SIZE_I64: usize = size_of::<i64>();
+
+pub const SIZE_F32: usize = size_of::<f32>();
+pub const SIZE_F64: usize = size_of::<f64>();
+
+pub const SIZE_SOFFSET: usize = SIZE_I32;
+pub const SIZE_UOFFSET: usize = SIZE_U32;
+pub const SIZE_VOFFSET: usize = SIZE_I16;
+
+pub const SIZE_SIZEPREFIX: usize = SIZE_UOFFSET;
+
+/// SOffsetT is an i32 that is used by tables to reference their vtables.
+pub type SOffsetT = i32;
+
+/// UOffsetT is a u32 that is used by pervasively to represent both pointers
+/// and lengths of vectors.
+pub type UOffsetT = u32;
+
+/// VOffsetT is a i32 that is used by vtables to store field data.
+pub type VOffsetT = i16;
+
+/// TableFinishedWIPOffset marks a WIPOffset as being for a finished table.
+pub struct TableFinishedWIPOffset {}
+
+/// TableUnfinishedWIPOffset marks a WIPOffset as being for an unfinished table.
+pub struct TableUnfinishedWIPOffset {}
+
+/// UnionWIPOffset marks a WIPOffset as being for a union value.
+pub struct UnionWIPOffset {}
+
+/// VTableWIPOffset marks a WIPOffset as being for a vtable.
+pub struct VTableWIPOffset {}
+
+/// WIPOffset contains an UOffsetT with a special meaning: it is the location of
+/// data relative to the *end* of an in-progress FlatBuffer. The
+/// FlatBufferBuilder uses this to track the location of objects in an absolute
+/// way. The impl of Push converts a WIPOffset into a ForwardsUOffset.
+#[derive(Debug)]
+pub struct WIPOffset<T>(UOffsetT, PhantomData<T>);
+
+// TODO(rw): why do we need to reimplement (with a default impl) Copy to
+//           avoid ownership errors?
+impl<T> Copy for WIPOffset<T> {}
+impl<T> Clone for WIPOffset<T> {
+    #[inline]
+    fn clone(&self) -> WIPOffset<T> {
+        WIPOffset::new(self.0.clone())
+    }
+}
+impl<T> PartialEq for WIPOffset<T> {
+    fn eq(&self, o: &WIPOffset<T>) -> bool {
+        self.value() == o.value()
+    }
+}
+
+impl<T> Deref for WIPOffset<T> {
+    type Target = UOffsetT;
+    #[inline]
+    fn deref(&self) -> &UOffsetT {
+        &self.0
+    }
+}
+impl<'a, T: 'a> WIPOffset<T> {
+    /// Create a new WIPOffset.
+    #[inline]
+    pub fn new(o: UOffsetT) -> WIPOffset<T> {
+        WIPOffset {
+            0: o,
+            1: PhantomData,
+        }
+    }
+
+    /// Return a wrapped value that brings its meaning as a union WIPOffset
+    /// into the type system.
+    #[inline(always)]
+    pub fn as_union_value(&self) -> WIPOffset<UnionWIPOffset> {
+        WIPOffset::new(self.0)
+    }
+    /// Get the underlying value.
+    #[inline(always)]
+    pub fn value(&self) -> UOffsetT {
+        self.0
+    }
+}
+
+impl<T> Push for WIPOffset<T> {
+    type Output = ForwardsUOffset<T>;
+
+    #[inline(always)]
+    fn push(&self, dst: &mut [u8], rest: &[u8]) {
+        let n = (SIZE_UOFFSET + rest.len() - self.value() as usize) as UOffsetT;
+        emplace_scalar::<UOffsetT>(dst, n);
+    }
+}
+
+impl<T> Push for ForwardsUOffset<T> {
+    type Output = Self;
+
+    #[inline(always)]
+    fn push(&self, dst: &mut [u8], rest: &[u8]) {
+        self.value().push(dst, rest);
+    }
+}
+
+/// ForwardsUOffset is used by Follow to traverse a FlatBuffer: the pointer
+/// is incremented by the value contained in this type.
+#[derive(Debug)]
+pub struct ForwardsUOffset<T>(UOffsetT, PhantomData<T>);
+impl<T> ForwardsUOffset<T> {
+    #[inline(always)]
+    pub fn value(&self) -> UOffsetT {
+        self.0
+    }
+}
+
+impl<'a, T: Follow<'a>> Follow<'a> for ForwardsUOffset<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        let slice = &buf[loc..loc + SIZE_UOFFSET];
+        let off = read_scalar::<u32>(slice) as usize;
+        T::follow(buf, loc + off)
+    }
+}
+
+/// ForwardsVOffset is used by Follow to traverse a FlatBuffer: the pointer
+/// is incremented by the value contained in this type.
+#[derive(Debug)]
+pub struct ForwardsVOffset<T>(VOffsetT, PhantomData<T>);
+impl<T> ForwardsVOffset<T> {
+    #[inline(always)]
+    pub fn value(&self) -> VOffsetT {
+        self.0
+    }
+}
+
+impl<'a, T: Follow<'a>> Follow<'a> for ForwardsVOffset<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        let slice = &buf[loc..loc + SIZE_VOFFSET];
+        let off = read_scalar::<VOffsetT>(slice) as usize;
+        T::follow(buf, loc + off)
+    }
+}
+
+impl<T> Push for ForwardsVOffset<T> {
+    type Output = Self;
+
+    #[inline]
+    fn push(&self, dst: &mut [u8], rest: &[u8]) {
+        self.value().push(dst, rest);
+    }
+}
+
+/// ForwardsSOffset is used by Follow to traverse a FlatBuffer: the pointer
+/// is incremented by the *negative* of the value contained in this type.
+#[derive(Debug)]
+pub struct BackwardsSOffset<T>(SOffsetT, PhantomData<T>);
+impl<T> BackwardsSOffset<T> {
+    #[inline(always)]
+    pub fn value(&self) -> SOffsetT {
+        self.0
+    }
+}
+
+impl<'a, T: Follow<'a>> Follow<'a> for BackwardsSOffset<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        let slice = &buf[loc..loc + SIZE_SOFFSET];
+        let off = read_scalar::<SOffsetT>(slice);
+        T::follow(buf, (loc as SOffsetT - off) as usize)
+    }
+}
+
+impl<T> Push for BackwardsSOffset<T> {
+    type Output = Self;
+
+    #[inline]
+    fn push(&self, dst: &mut [u8], rest: &[u8]) {
+        self.value().push(dst, rest);
+    }
+}
+
+/// SkipSizePrefix is used by Follow to traverse a FlatBuffer: the pointer is
+/// incremented by a fixed constant in order to skip over the size prefix value.
+pub struct SkipSizePrefix<T>(PhantomData<T>);
+impl<'a, T: Follow<'a> + 'a> Follow<'a> for SkipSizePrefix<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        T::follow(buf, loc + SIZE_SIZEPREFIX)
+    }
+}
+
+/// SkipRootOffset is used by Follow to traverse a FlatBuffer: the pointer is
+/// incremented by a fixed constant in order to skip over the root offset value.
+pub struct SkipRootOffset<T>(PhantomData<T>);
+impl<'a, T: Follow<'a> + 'a> Follow<'a> for SkipRootOffset<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        T::follow(buf, loc + SIZE_UOFFSET)
+    }
+}
+
+/// FileIdentifier is used by Follow to traverse a FlatBuffer: the pointer is
+/// dereferenced into a byte slice, whose bytes are the file identifer value.
+pub struct FileIdentifier;
+impl<'a> Follow<'a> for FileIdentifier {
+    type Inner = &'a [u8];
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        &buf[loc..loc + FILE_IDENTIFIER_LENGTH]
+    }
+}
+
+/// SkipFileIdentifier is used by Follow to traverse a FlatBuffer: the pointer
+/// is incremented by a fixed constant in order to skip over the file
+/// identifier value.
+pub struct SkipFileIdentifier<T>(PhantomData<T>);
+impl<'a, T: Follow<'a> + 'a> Follow<'a> for SkipFileIdentifier<T> {
+    type Inner = T::Inner;
+    #[inline(always)]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        T::follow(buf, loc + FILE_IDENTIFIER_LENGTH)
+    }
+}
+
+/// Follow trait impls for primitive types.
+///
+/// Ideally, these would be implemented as a single impl using trait bounds on
+/// EndianScalar, but implementing Follow that way causes a conflict with
+/// other impls.
+macro_rules! impl_follow_for_endian_scalar {
+    ($ty:ident) => {
+        impl<'a> Follow<'a> for $ty {
+            type Inner = $ty;
+            #[inline(always)]
+            fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+                read_scalar_at::<$ty>(buf, loc)
+            }
+        }
+    };
+}
+
+impl_follow_for_endian_scalar!(bool);
+impl_follow_for_endian_scalar!(u8);
+impl_follow_for_endian_scalar!(u16);
+impl_follow_for_endian_scalar!(u32);
+impl_follow_for_endian_scalar!(u64);
+impl_follow_for_endian_scalar!(i8);
+impl_follow_for_endian_scalar!(i16);
+impl_follow_for_endian_scalar!(i32);
+impl_follow_for_endian_scalar!(i64);
+impl_follow_for_endian_scalar!(f32);
+impl_follow_for_endian_scalar!(f64);
diff --git a/rust/flatbuffers/src/push.rs b/rust/flatbuffers/src/push.rs
new file mode 100644
index 0000000..1863058
--- /dev/null
+++ b/rust/flatbuffers/src/push.rs
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::cmp::max;
+use std::mem::{align_of, size_of};
+
+use endian_scalar::emplace_scalar;
+
+/// Trait to abstract over functionality needed to write values (either owned
+/// or referenced). Used in FlatBufferBuilder and implemented for generated
+/// types.
+pub trait Push: Sized {
+    type Output;
+    fn push(&self, dst: &mut [u8], _rest: &[u8]);
+    #[inline]
+    fn size() -> usize {
+        size_of::<Self::Output>()
+    }
+    #[inline]
+    fn alignment() -> PushAlignment {
+        PushAlignment::new(align_of::<Self::Output>())
+    }
+}
+
+/// Ensure Push alignment calculations are typesafe (because this helps reduce
+/// implementation issues when using FlatBufferBuilder::align).
+pub struct PushAlignment(usize);
+impl PushAlignment {
+    #[inline]
+    pub fn new(x: usize) -> Self {
+        PushAlignment { 0: x }
+    }
+    #[inline]
+    pub fn value(&self) -> usize {
+        self.0
+    }
+    #[inline]
+    pub fn max_of(&self, o: usize) -> Self {
+        PushAlignment::new(max(self.0, o))
+    }
+}
+
+/// Macro to implement Push for EndianScalar types.
+macro_rules! impl_push_for_endian_scalar {
+    ($ty:ident) => {
+        impl Push for $ty {
+            type Output = $ty;
+
+            #[inline]
+            fn push(&self, dst: &mut [u8], _rest: &[u8]) {
+                emplace_scalar::<$ty>(dst, *self);
+            }
+        }
+    };
+}
+
+impl_push_for_endian_scalar!(bool);
+impl_push_for_endian_scalar!(u8);
+impl_push_for_endian_scalar!(i8);
+impl_push_for_endian_scalar!(u16);
+impl_push_for_endian_scalar!(i16);
+impl_push_for_endian_scalar!(u32);
+impl_push_for_endian_scalar!(i32);
+impl_push_for_endian_scalar!(u64);
+impl_push_for_endian_scalar!(i64);
+impl_push_for_endian_scalar!(f32);
+impl_push_for_endian_scalar!(f64);
diff --git a/rust/flatbuffers/src/table.rs b/rust/flatbuffers/src/table.rs
new file mode 100644
index 0000000..7b1c4a5
--- /dev/null
+++ b/rust/flatbuffers/src/table.rs
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use follow::Follow;
+use primitives::*;
+use vtable::VTable;
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub struct Table<'a> {
+    pub buf: &'a [u8],
+    pub loc: usize,
+}
+
+impl<'a> Table<'a> {
+    #[inline]
+    pub fn new(buf: &'a [u8], loc: usize) -> Self {
+        Table { buf: buf, loc: loc }
+    }
+    #[inline]
+    pub fn vtable(&self) -> VTable<'a> {
+        <BackwardsSOffset<VTable<'a>>>::follow(self.buf, self.loc)
+    }
+    #[inline]
+    pub fn get<T: Follow<'a> + 'a>(
+        &self,
+        slot_byte_loc: VOffsetT,
+        default: Option<T::Inner>,
+    ) -> Option<T::Inner> {
+        let o = self.vtable().get(slot_byte_loc) as usize;
+        if o == 0 {
+            return default;
+        }
+        Some(<T>::follow(self.buf, self.loc + o))
+    }
+}
+
+impl<'a> Follow<'a> for Table<'a> {
+    type Inner = Table<'a>;
+    #[inline]
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        Table { buf: buf, loc: loc }
+    }
+}
+
+#[inline]
+pub fn get_root<'a, T: Follow<'a> + 'a>(data: &'a [u8]) -> T::Inner {
+    <ForwardsUOffset<T>>::follow(data, 0)
+}
+#[inline]
+pub fn get_size_prefixed_root<'a, T: Follow<'a> + 'a>(data: &'a [u8]) -> T::Inner {
+    <SkipSizePrefix<ForwardsUOffset<T>>>::follow(data, 0)
+}
+#[inline]
+pub fn buffer_has_identifier(data: &[u8], ident: &str, size_prefixed: bool) -> bool {
+    assert_eq!(ident.len(), FILE_IDENTIFIER_LENGTH);
+
+    let got = if size_prefixed {
+        <SkipSizePrefix<SkipRootOffset<FileIdentifier>>>::follow(data, 0)
+    } else {
+        <SkipRootOffset<FileIdentifier>>::follow(data, 0)
+    };
+
+    ident.as_bytes() == got
+}
diff --git a/rust/flatbuffers/src/vector.rs b/rust/flatbuffers/src/vector.rs
new file mode 100644
index 0000000..66653eb
--- /dev/null
+++ b/rust/flatbuffers/src/vector.rs
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::marker::PhantomData;
+use std::mem::size_of;
+use std::slice::from_raw_parts;
+use std::str::from_utf8_unchecked;
+
+#[cfg(target_endian = "little")]
+use endian_scalar::EndianScalar;
+use endian_scalar::{read_scalar, read_scalar_at};
+use follow::Follow;
+use primitives::*;
+
+#[derive(Debug)]
+pub struct Vector<'a, T: 'a>(&'a [u8], usize, PhantomData<T>);
+
+impl<'a, T: 'a> Vector<'a, T> {
+    #[inline(always)]
+    pub fn new(buf: &'a [u8], loc: usize) -> Self {
+        Vector {
+            0: buf,
+            1: loc,
+            2: PhantomData,
+        }
+    }
+
+    #[inline(always)]
+    pub fn len(&self) -> usize {
+        read_scalar::<UOffsetT>(&self.0[self.1 as usize..]) as usize
+    }
+}
+
+impl<'a, T: Follow<'a> + 'a> Vector<'a, T> {
+    #[inline(always)]
+    pub fn get(&self, idx: usize) -> T::Inner {
+        debug_assert!(idx < read_scalar::<u32>(&self.0[self.1 as usize..]) as usize);
+        let sz = size_of::<T>();
+        debug_assert!(sz > 0);
+        T::follow(self.0, self.1 as usize + SIZE_UOFFSET + sz * idx)
+    }
+}
+
+pub trait SafeSliceAccess {}
+impl<'a, T: SafeSliceAccess + 'a> Vector<'a, T> {
+    pub fn safe_slice(self) -> &'a [T] {
+        let buf = self.0;
+        let loc = self.1;
+        let sz = size_of::<T>();
+        debug_assert!(sz > 0);
+        let len = read_scalar_at::<UOffsetT>(&buf, loc) as usize;
+        let data_buf = &buf[loc + SIZE_UOFFSET..loc + SIZE_UOFFSET + len * sz];
+        let ptr = data_buf.as_ptr() as *const T;
+        let s: &'a [T] = unsafe { from_raw_parts(ptr, len) };
+        s
+    }
+}
+
+impl SafeSliceAccess for u8 {}
+impl SafeSliceAccess for i8 {}
+impl SafeSliceAccess for bool {}
+
+#[cfg(target_endian = "little")]
+mod le_safe_slice_impls {
+    impl super::SafeSliceAccess for u16 {}
+    impl super::SafeSliceAccess for u32 {}
+    impl super::SafeSliceAccess for u64 {}
+
+    impl super::SafeSliceAccess for i16 {}
+    impl super::SafeSliceAccess for i32 {}
+    impl super::SafeSliceAccess for i64 {}
+
+    impl super::SafeSliceAccess for f32 {}
+    impl super::SafeSliceAccess for f64 {}
+}
+
+#[cfg(target_endian = "little")]
+pub use self::le_safe_slice_impls::*;
+
+pub fn follow_cast_ref<'a, T: Sized + 'a>(buf: &'a [u8], loc: usize) -> &'a T {
+    let sz = size_of::<T>();
+    let buf = &buf[loc..loc + sz];
+    let ptr = buf.as_ptr() as *const T;
+    unsafe { &*ptr }
+}
+
+impl<'a> Follow<'a> for &'a str {
+    type Inner = &'a str;
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        let len = read_scalar_at::<UOffsetT>(&buf, loc) as usize;
+        let slice = &buf[loc + SIZE_UOFFSET..loc + SIZE_UOFFSET + len];
+        let s = unsafe { from_utf8_unchecked(slice) };
+        s
+    }
+}
+
+#[cfg(target_endian = "little")]
+fn follow_slice_helper<T>(buf: &[u8], loc: usize) -> &[T] {
+    let sz = size_of::<T>();
+    debug_assert!(sz > 0);
+    let len = read_scalar_at::<UOffsetT>(&buf, loc) as usize;
+    let data_buf = &buf[loc + SIZE_UOFFSET..loc + SIZE_UOFFSET + len * sz];
+    let ptr = data_buf.as_ptr() as *const T;
+    let s: &[T] = unsafe { from_raw_parts(ptr, len) };
+    s
+}
+
+/// Implement direct slice access if the host is little-endian.
+#[cfg(target_endian = "little")]
+impl<'a, T: EndianScalar> Follow<'a> for &'a [T] {
+    type Inner = &'a [T];
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        follow_slice_helper::<T>(buf, loc)
+    }
+}
+
+/// Implement Follow for all possible Vectors that have Follow-able elements.
+impl<'a, T: Follow<'a> + 'a> Follow<'a> for Vector<'a, T> {
+    type Inner = Vector<'a, T>;
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        Vector::new(buf, loc)
+    }
+}
diff --git a/rust/flatbuffers/src/vtable.rs b/rust/flatbuffers/src/vtable.rs
new file mode 100644
index 0000000..5808670
--- /dev/null
+++ b/rust/flatbuffers/src/vtable.rs
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use endian_scalar::read_scalar_at;
+use follow::Follow;
+use primitives::*;
+
+/// VTable encapsulates read-only usage of a vtable. It is only to be used
+/// by generated code.
+#[derive(Debug)]
+pub struct VTable<'a> {
+    buf: &'a [u8],
+    loc: usize,
+}
+
+impl<'a> PartialEq for VTable<'a> {
+    fn eq(&self, other: &VTable) -> bool {
+        self.as_bytes().eq(other.as_bytes())
+    }
+}
+
+impl<'a> VTable<'a> {
+    pub fn init(buf: &'a [u8], loc: usize) -> Self {
+        VTable { buf: buf, loc: loc }
+    }
+    pub fn num_fields(&self) -> usize {
+        (self.num_bytes() / SIZE_VOFFSET) - 2
+    }
+    pub fn num_bytes(&self) -> usize {
+        read_scalar_at::<VOffsetT>(self.buf, self.loc) as usize
+    }
+    pub fn object_inline_num_bytes(&self) -> usize {
+        let n = read_scalar_at::<VOffsetT>(self.buf, self.loc + SIZE_VOFFSET);
+        n as usize
+    }
+    pub fn get_field(&self, idx: usize) -> VOffsetT {
+        // TODO(rw): distinguish between None and 0?
+        if idx > self.num_fields() {
+            return 0;
+        }
+        read_scalar_at::<VOffsetT>(
+            self.buf,
+            self.loc + SIZE_VOFFSET + SIZE_VOFFSET + SIZE_VOFFSET * idx,
+        )
+    }
+    pub fn get(&self, byte_loc: VOffsetT) -> VOffsetT {
+        // TODO(rw): distinguish between None and 0?
+        if byte_loc as usize >= self.num_bytes() {
+            return 0;
+        }
+        read_scalar_at::<VOffsetT>(self.buf, self.loc + byte_loc as usize)
+    }
+    pub fn as_bytes(&self) -> &[u8] {
+        let len = self.num_bytes();
+        &self.buf[self.loc..self.loc + len]
+    }
+}
+
+#[allow(dead_code)]
+pub fn field_index_to_field_offset(field_id: VOffsetT) -> VOffsetT {
+    // Should correspond to what end_table() below builds up.
+    let fixed_fields = 2; // Vtable size and Object Size.
+    ((field_id + fixed_fields) * (SIZE_VOFFSET as VOffsetT)) as VOffsetT
+}
+
+#[allow(dead_code)]
+pub fn field_offset_to_field_index(field_o: VOffsetT) -> VOffsetT {
+    debug_assert!(field_o >= 2);
+    let fixed_fields = 2; // VTable size and Object Size.
+    (field_o / (SIZE_VOFFSET as VOffsetT)) - fixed_fields
+}
+
+impl<'a> Follow<'a> for VTable<'a> {
+    type Inner = VTable<'a>;
+    fn follow(buf: &'a [u8], loc: usize) -> Self::Inner {
+        VTable::init(buf, loc)
+    }
+}
diff --git a/rust/flatbuffers/src/vtable_writer.rs b/rust/flatbuffers/src/vtable_writer.rs
new file mode 100644
index 0000000..d1e87dd
--- /dev/null
+++ b/rust/flatbuffers/src/vtable_writer.rs
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2018 Google Inc. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+use std::ptr::write_bytes;
+
+use endian_scalar::{emplace_scalar, read_scalar_at};
+use primitives::*;
+
+/// VTableWriter compartmentalizes actions needed to create a vtable.
+#[derive(Debug)]
+pub struct VTableWriter<'a> {
+    buf: &'a mut [u8],
+}
+
+impl<'a> VTableWriter<'a> {
+    #[inline(always)]
+    pub fn init(buf: &'a mut [u8]) -> Self {
+        VTableWriter { buf: buf }
+    }
+
+    /// Writes the vtable length (in bytes) into the vtable.
+    ///
+    /// Note that callers already need to have computed this to initialize
+    /// a VTableWriter.
+    ///
+    /// In debug mode, asserts that the length of the underlying data is equal
+    /// to the provided value.
+    #[inline(always)]
+    pub fn write_vtable_byte_length(&mut self, n: VOffsetT) {
+        emplace_scalar::<VOffsetT>(&mut self.buf[..SIZE_VOFFSET], n);
+        debug_assert_eq!(n as usize, self.buf.len());
+    }
+
+    /// Writes an object length (in bytes) into the vtable.
+    #[inline(always)]
+    pub fn write_object_inline_size(&mut self, n: VOffsetT) {
+        emplace_scalar::<VOffsetT>(&mut self.buf[SIZE_VOFFSET..2 * SIZE_VOFFSET], n);
+    }
+
+    /// Gets an object field offset from the vtable. Only used for debugging.
+    ///
+    /// Note that this expects field offsets (which are like pointers), not
+    /// field ids (which are like array indices).
+    #[inline(always)]
+    pub fn get_field_offset(&self, vtable_offset: VOffsetT) -> VOffsetT {
+        let idx = vtable_offset as usize;
+        read_scalar_at::<VOffsetT>(&self.buf, idx)
+    }
+
+    /// Writes an object field offset into the vtable.
+    ///
+    /// Note that this expects field offsets (which are like pointers), not
+    /// field ids (which are like array indices).
+    #[inline(always)]
+    pub fn write_field_offset(&mut self, vtable_offset: VOffsetT, object_data_offset: VOffsetT) {
+        let idx = vtable_offset as usize;
+        emplace_scalar::<VOffsetT>(&mut self.buf[idx..idx + SIZE_VOFFSET], object_data_offset);
+    }
+
+    /// Clears all data in this VTableWriter. Used to cleanly undo a
+    /// vtable write.
+    #[inline(always)]
+    pub fn clear(&mut self) {
+        // This is the closest thing to memset in Rust right now.
+        let len = self.buf.len();
+        let p = self.buf.as_mut_ptr() as *mut u8;
+        unsafe {
+            write_bytes(p, 0, len);
+        }
+    }
+}