diff --git a/frc971/constants.cc b/frc971/constants.cc
index 672d5ef..39f92d2 100755
--- a/frc971/constants.cc
+++ b/frc971/constants.cc
@@ -108,8 +108,9 @@
            0.1,
            0.0,
            1.57,
-           {0.0, 2.05, 0.02, 2.02, {-0.1, 0.05}, {1.0, 1.1}, {2.0, 2.1}},
-           {0.0, 2.05, 0.02, 2.02, {-0.1, 0.05}, {1.0, 1.1}, {2.0, 2.1}},
+           // TODO(austin): Radians...
+           {-196.70, 121.42, 0.02, 2.02, {-196.92, -180.99}, {-15.17, -3.30}, {106.26, 129.55}},
+           {-142.96, 179.45, 0.02, 2.02, {-147.01, -127.93}, {-17.84, -5.39}, {167.75, 192.25}},
            0.01,  // claw_unimportant_epsilon
            0.9,  // start_fine_tune_pos
            4.0,
diff --git a/frc971/constants.h b/frc971/constants.h
index a5b7fb1..2a9c642 100755
--- a/frc971/constants.h
+++ b/frc971/constants.h
@@ -11,8 +11,8 @@
 // Has all of the numbers that change for both robots and makes it easy to
 // retrieve the values for the current one.
 
-const uint16_t kCompTeamNumber = 8971;
-const uint16_t kPracticeTeamNumber = 971;
+const uint16_t kCompTeamNumber = 971;
+const uint16_t kPracticeTeamNumber = 8971;
 
 // Contains the voltages for an analog hall effect sensor on a shifter.
 struct ShifterHallEffect {
diff --git a/frc971/control_loops/claw/claw.cc b/frc971/control_loops/claw/claw.cc
index cfe61a0..b6d3b2f 100755
--- a/frc971/control_loops/claw/claw.cc
+++ b/frc971/control_loops/claw/claw.cc
@@ -53,12 +53,10 @@
       const double difference =
           uncapped_average_voltage_ - values.claw.max_zeroing_voltage;
       U(0, 0) -= difference;
-      U(1, 0) -= difference;
     } else if (uncapped_average_voltage_ < -values.claw.max_zeroing_voltage) {
       const double difference =
           -uncapped_average_voltage_ - values.claw.max_zeroing_voltage;
       U(0, 0) += difference;
-      U(1, 0) += difference;
     }
   }
 
@@ -83,7 +81,8 @@
       claw_(MakeClawLoop()),
       was_enabled_(false),
       doing_calibration_fine_tune_(false),
-      capped_goal_(false) {}
+      capped_goal_(false),
+      mode_(UNKNOWN_LOCATION) {}
 
 const int ZeroedStateFeedbackLoop::kZeroingMaxVoltage;
 
@@ -211,6 +210,21 @@
   LOG(INFO, "Changing bottom offset by %f\n", doffset);
 }
 
+bool ClawMotor::is_ready() const {
+  return (
+      (top_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED &&
+       bottom_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED) ||
+      (::aos::robot_state->autonomous &&
+       ((top_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED ||
+         top_claw_.zeroing_state() ==
+             ZeroedStateFeedbackLoop::DISABLED_CALIBRATION) &&
+        (bottom_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED ||
+         bottom_claw_.zeroing_state() ==
+             ZeroedStateFeedbackLoop::DISABLED_CALIBRATION))));
+}
+
+bool ClawMotor::is_zeroing() const { return !is_ready(); }
+
 // Positive angle is up, and positive power is up.
 void ClawMotor::RunIteration(const control_loops::ClawGroup::Goal *goal,
                              const control_loops::ClawGroup::Position *position,
@@ -249,13 +263,13 @@
     if (!has_top_claw_goal_) {
       has_top_claw_goal_ = true;
       top_claw_goal_ = top_claw_.absolute_position();
-      initial_seperation_ =
+      initial_separation_ =
           top_claw_.absolute_position() - bottom_claw_.absolute_position();
     }
     if (!has_bottom_claw_goal_) {
       has_bottom_claw_goal_ = true;
       bottom_claw_goal_ = bottom_claw_.absolute_position();
-      initial_seperation_ =
+      initial_separation_ =
           top_claw_.absolute_position() - bottom_claw_.absolute_position();
     }
     LOG(DEBUG, "Claw position is (top: %f bottom: %f\n",
@@ -265,14 +279,6 @@
   bool autonomous = ::aos::robot_state->autonomous;
   bool enabled = ::aos::robot_state->enabled;
 
-  enum CalibrationMode {
-    READY,
-    FINE_TUNE,
-    UNKNOWN_LOCATION
-  };
-
-  CalibrationMode mode;
-
   if ((top_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED &&
        bottom_claw_.zeroing_state() == ZeroedStateFeedbackLoop::CALIBRATED) ||
       (autonomous &&
@@ -290,13 +296,14 @@
     has_top_claw_goal_ = true;
     doing_calibration_fine_tune_ = false;
 
-    mode = READY;
+    mode_ = READY;
   } else if (top_claw_.zeroing_state() !=
                  ZeroedStateFeedbackLoop::UNKNOWN_POSITION &&
              bottom_claw_.zeroing_state() !=
                  ZeroedStateFeedbackLoop::UNKNOWN_POSITION) {
     // Time to fine tune the zero.
     // Limit the goals here.
+    // TODO(austin): Handle disabled state here.
     if (bottom_claw_.zeroing_state() != ZeroedStateFeedbackLoop::CALIBRATED) {
       // always get the bottom claw to calibrated first
       LOG(DEBUG, "Calibrating the bottom of the claw\n");
@@ -307,12 +314,15 @@
           doing_calibration_fine_tune_ = true;
           bottom_claw_goal_ += values.claw.claw_zeroing_speed * dt;
           LOG(DEBUG, "Ready to fine tune the bottom\n");
+          mode_ = FINE_TUNE_BOTTOM;
         } else {
           // send bottom to zeroing start
           bottom_claw_goal_ = values.claw.start_fine_tune_pos;
           LOG(DEBUG, "Going to the start position for the bottom\n");
+          mode_ = PREP_FINE_TUNE_BOTTOM;
         }
       } else {
+        mode_ = FINE_TUNE_BOTTOM;
         bottom_claw_goal_ += values.claw.claw_zeroing_speed * dt;
         if (top_claw_.front_hall_effect() || top_claw_.back_hall_effect() ||
             bottom_claw_.front_hall_effect() ||
@@ -322,6 +332,7 @@
           doing_calibration_fine_tune_ = false;
           bottom_claw_goal_ = values.claw.start_fine_tune_pos;
           LOG(DEBUG, "Found a limit, starting over.\n");
+          mode_ = PREP_FINE_TUNE_BOTTOM;
         }
 
         if (bottom_claw_.calibration_hall_effect()) {
@@ -338,6 +349,7 @@
           } else {
             doing_calibration_fine_tune_ = false;
             bottom_claw_goal_ = values.claw.start_fine_tune_pos;
+            mode_ = PREP_FINE_TUNE_BOTTOM;
           }
         } else {
           LOG(DEBUG, "Fine tuning\n");
@@ -355,12 +367,15 @@
           doing_calibration_fine_tune_ = true;
           top_claw_goal_ += values.claw.claw_zeroing_speed * dt;
           LOG(DEBUG, "Ready to fine tune the top\n");
+          mode_ = FINE_TUNE_TOP;
         } else {
           // send top to zeroing start
           top_claw_goal_ = values.claw.start_fine_tune_pos;
           LOG(DEBUG, "Going to the start position for the top\n");
+          mode_ = PREP_FINE_TUNE_TOP;
         }
       } else {
+        mode_ = FINE_TUNE_TOP;
         top_claw_goal_ += values.claw.claw_zeroing_speed * dt;
         if (top_claw_.front_hall_effect() || top_claw_.back_hall_effect() ||
             bottom_claw_.front_hall_effect() ||
@@ -369,6 +384,7 @@
           doing_calibration_fine_tune_ = false;
           top_claw_goal_ = values.claw.start_fine_tune_pos;
           LOG(DEBUG, "Found a limit, starting over.\n");
+          mode_ = PREP_FINE_TUNE_TOP;
         }
         if (top_claw_.calibration_hall_effect()) {
           if (top_claw_.calibration_hall_effect_posedge_count_changed() &&
@@ -378,26 +394,26 @@
                 position->top.posedge_value,
                 values.claw.upper_claw.calibration.lower_angle);
             top_claw_.set_zeroing_state(ZeroedStateFeedbackLoop::CALIBRATED);
-            // calinrated so we are done fine tuning top
+            // calibrated so we are done fine tuning top
             doing_calibration_fine_tune_ = false;
             LOG(DEBUG, "Calibrated the top correctly!\n");
           } else {
             doing_calibration_fine_tune_ = false;
             top_claw_goal_ = values.claw.start_fine_tune_pos;
+            mode_ = PREP_FINE_TUNE_TOP;
           }
         }
       }
       // now set the bottom claw to track
       bottom_claw_goal_ = top_claw_goal_ - values.claw.claw_zeroing_separation;
     }
-    mode = FINE_TUNE;
   } else {
     doing_calibration_fine_tune_ = false;
     if (!was_enabled_ && enabled) {
       if (position) {
         top_claw_goal_ = position->top.position;
         bottom_claw_goal_ = position->bottom.position;
-        initial_seperation_ =
+        initial_separation_ =
             position->top.position - position->bottom.position;
       } else {
         has_top_claw_goal_ = false;
@@ -441,12 +457,9 @@
       bottom_claw_.SetCalibrationOnEdge(
           values.claw.lower_claw, ZeroedStateFeedbackLoop::DISABLED_CALIBRATION);
     }
-    mode = UNKNOWN_LOCATION;
+    mode_ = UNKNOWN_LOCATION;
   }
 
-  // TODO(austin): Handle disabled properly everwhere...  Restart and all that
-  // jazz.
-
   if (has_top_claw_goal_ && has_bottom_claw_goal_) {
     claw_.R << bottom_claw_goal_, top_claw_goal_ - bottom_claw_goal_, 0, 0;
     double separation = -971;
@@ -457,18 +470,21 @@
         claw_.R(1, 0), separation);
 
     // Only cap power when one of the halves of the claw is unknown.
-    claw_.set_is_zeroing(mode == UNKNOWN_LOCATION);
+    claw_.set_is_zeroing(mode_ == UNKNOWN_LOCATION || mode_ == FINE_TUNE_TOP ||
+                         mode_ == FINE_TUNE_BOTTOM);
     claw_.Update(output == nullptr);
   } else {
     claw_.Update(true);
   }
 
   capped_goal_ = false;
-  switch (mode) {
+  switch (mode_) {
     case READY:
+    case PREP_FINE_TUNE_TOP:
+    case PREP_FINE_TUNE_BOTTOM:
       break;
-    case FINE_TUNE:
-      break;
+    case FINE_TUNE_BOTTOM:
+    case FINE_TUNE_TOP:
     case UNKNOWN_LOCATION: {
       if (claw_.uncapped_average_voltage() > values.claw.max_zeroing_voltage) {
         double dx = (claw_.uncapped_average_voltage() -
@@ -478,6 +494,10 @@
         top_claw_goal_ -= dx;
         capped_goal_ = true;
         LOG(DEBUG, "Moving the goal by %f to prevent windup\n", dx);
+        LOG(DEBUG, "Uncapped is %f, max is %f, difference is %f\n",
+            claw_.uncapped_average_voltage(), values.claw.max_zeroing_voltage,
+            (claw_.uncapped_average_voltage() -
+             values.claw.max_zeroing_voltage));
       } else if (claw_.uncapped_average_voltage() <
                  -values.claw.max_zeroing_voltage) {
         double dx = (claw_.uncapped_average_voltage() +
diff --git a/frc971/control_loops/claw/claw.h b/frc971/control_loops/claw/claw.h
index 20b30b6..34786b8 100755
--- a/frc971/control_loops/claw/claw.h
+++ b/frc971/control_loops/claw/claw.h
@@ -12,8 +12,7 @@
 namespace frc971 {
 namespace control_loops {
 namespace testing {
-class ClawTest_NoWindupPositive_Test;
-class ClawTest_NoWindupNegative_Test;
+class WindupClawTest;
 };
 
 // Note: Everything in this file assumes that there is a 1 cycle delay between
@@ -241,12 +240,30 @@
   // True if the state machine is ready.
   bool capped_goal() const { return capped_goal_; }
 
+  double uncapped_average_voltage() const {
+    return claw_.uncapped_average_voltage();
+  }
+
+  // True if the claw is zeroing.
+  bool is_zeroing() const;
+
   // True if the state machine is ready.
-  bool is_ready() const { return false; }
+  bool is_ready() const;
 
   void ChangeTopOffset(double doffset);
   void ChangeBottomOffset(double doffset);
 
+  enum CalibrationMode {
+    READY,
+    PREP_FINE_TUNE_TOP,
+    FINE_TUNE_TOP,
+    PREP_FINE_TUNE_BOTTOM,
+    FINE_TUNE_BOTTOM,
+    UNKNOWN_LOCATION
+  };
+
+  CalibrationMode mode() const { return mode_; }
+
  protected:
   virtual void RunIteration(const control_loops::ClawGroup::Goal *goal,
                             const control_loops::ClawGroup::Position *position,
@@ -260,8 +277,7 @@
 
  private:
   // Friend the test classes for acces to the internal state.
-  friend class testing::ClawTest_NoWindupPositive_Test;
-  friend class testing::ClawTest_NoWindupNegative_Test;
+  friend class testing::WindupClawTest;
 
   // The zeroed joint to use.
   bool has_top_claw_goal_;
@@ -280,9 +296,10 @@
 
   // The initial seperation when disabled.  Used as the safe seperation
   // distance.
-  double initial_seperation_;
+  double initial_separation_;
 
   bool capped_goal_;
+  CalibrationMode mode_;
 
   DISALLOW_COPY_AND_ASSIGN(ClawMotor);
 };
diff --git a/frc971/control_loops/claw/claw_lib_test.cc b/frc971/control_loops/claw/claw_lib_test.cc
index 0d4a7be..774a4c1 100644
--- a/frc971/control_loops/claw/claw_lib_test.cc
+++ b/frc971/control_loops/claw/claw_lib_test.cc
@@ -430,6 +430,7 @@
     EXPECT_TRUE(min_seperation_ <= seperation);
   }
 
+
   virtual ~ClawTest() {
     ::aos::robot_state.Clear();
   }
@@ -441,28 +442,10 @@
       .bottom_angle(0.1)
       .seperation_angle(0.2)
       .Send();
-  for (int i = 0; i < 400; ++i) {
-    claw_motor_plant_.SendPositionMessage();
-    claw_motor_.Iterate();
-    claw_motor_plant_.Simulate();
-    SendDSPacket(true);
-  }
-  VerifyNearGoal();
-}
-
-// Tests that the wrist zeros correctly starting on the hall effect sensor.
-TEST_F(ClawTest, ZerosInTheMiddle) {
-  claw_motor_plant_.Reinitialize(0.5, 0.4);
-
-  claw_queue_group.goal.MakeWithBuilder()
-      .bottom_angle(0.1)
-      .seperation_angle(0.2)
-      .Send();
   for (int i = 0; i < 500; ++i) {
     claw_motor_plant_.SendPositionMessage();
     claw_motor_.Iterate();
     claw_motor_plant_.Simulate();
-
     SendDSPacket(true);
   }
   VerifyNearGoal();
@@ -480,7 +463,7 @@
       .bottom_angle(0.1)
       .seperation_angle(0.2)
       .Send();
-  for (int i = 0; i < 600; ++i) {
+  for (int i = 0; i < 700; ++i) {
     claw_motor_plant_.SendPositionMessage();
     claw_motor_.Iterate();
     claw_motor_plant_.Simulate();
@@ -498,7 +481,7 @@
       .bottom_angle(0.1)
       .seperation_angle(0.2)
       .Send();
-  for (int i = 0; i < 600; ++i) {
+  for (int i = 0; i < 700; ++i) {
     if (i % 23) {
       claw_motor_plant_.SendPositionMessage();
     }
@@ -607,127 +590,100 @@
   }
   VerifyNearGoal();
 }
-
-// Tests that the wrist can't get too far away from the zeroing position if the
-// zeroing position is saturating the goal.
-TEST_F(ClawTest, NoWindupNegative) {
-  int capped_count[2] = {0, 0};
-  double saved_zeroing_position[2] = {0, 0};
-  claw_queue_group.goal.MakeWithBuilder()
-      .bottom_angle(0.1)
-      .seperation_angle(0.2)
-      .Send();
-  for (int i = 0; i < 500; ++i) {
-    claw_motor_plant_.SendPositionMessage();
-    if (i == 50) {
-      EXPECT_TRUE(claw_motor_.is_zeroing());
-      // Move the zeroing position far away and verify that it gets moved back.
-      saved_zeroing_position[TOP_CLAW] =
-          top_claw_motor_.zeroed_joint_.zeroing_position_;
-      top_claw_motor_.zeroed_joint_.zeroing_position_ = -100.0;
-      saved_zeroing_position[BOTTOM_CLAW] =
-          bottom_claw_motor_.zeroed_joint_.zeroing_position_;
-      bottom_claw_motor_.zeroed_joint_.zeroing_position_ = -100.0;
-    } else if (i == 51) {
-      EXPECT_TRUE(claw_motor_.is_zeroing());
-
-      EXPECT_NEAR(saved_zeroing_position[TOP_CLAW],
-                  top_claw_motor_.zeroed_joint_.zeroing_position_, 0.4);
-      EXPECT_NEAR(saved_zeroing_position[BOTTOM_CLAW],
-                  bottom_claw_motor_.zeroed_joint_.zeroing_position_, 0.4);
-    }
-    if (!claw_motor_.top().is_ready()) {
-      if (claw_motor_.top().capped_goal()) {
-        ++capped_count[TOP_CLAW];
-        // The cycle after we kick the zero position is the only cycle during
-        // which we should expect to see a high uncapped power during zeroing.
-        ASSERT_LT(5, ::std::abs(top_claw_motor_.zeroed_joint_.U_uncapped()));
-      } else {
-        ASSERT_GT(5, ::std::abs(top_claw_motor_.zeroed_joint_.U_uncapped()));
-      }
-    }
-    if (!claw_motor_.bottom().is_ready()) {
-      if (claw_motor_.bottom().capped_goal()) {
-        ++capped_count[BOTTOM_CLAW];
-        // The cycle after we kick the zero position is the only cycle during
-        // which we should expect to see a high uncapped power during zeroing.
-        ASSERT_LT(5, ::std::abs(bottom_claw_motor_.zeroed_joint_.U_uncapped()));
-      } else {
-        ASSERT_GT(5, ::std::abs(bottom_claw_motor_.zeroed_joint_.U_uncapped()));
-      }
-    }
-
-    claw_motor_.Iterate();
-    claw_motor_plant_.Simulate();
-    SendDSPacket(true);
-  }
-  VerifyNearGoal();
-  EXPECT_GT(3, capped_count[TOP_CLAW]);
-  EXPECT_GT(3, capped_count[BOTTOM_CLAW]);
-}
-
-// Tests that the wrist can't get too far away from the zeroing position if the
-// zeroing position is saturating the goal.
-TEST_F(ClawTest, NoWindupPositive) {
-  int capped_count[2] = {0, 0};
-  double saved_zeroing_position[2] = {0, 0};
-  claw_queue_group.goal.MakeWithBuilder()
-      .bottom_angle(0.1)
-      .seperation_angle(0.2)
-      .Send();
-  for (int i = 0; i < 500; ++i) {
-    claw_motor_plant_.SendPositionMessage();
-    if (i == 50) {
-      EXPECT_TRUE(top_claw_motor_.is_zeroing());
-      EXPECT_TRUE(top_claw_motor_.is_zeroing());
-      // Move the zeroing position far away and verify that it gets moved back.
-      saved_zeroing_position[TOP_CLAW] =
-          top_claw_motor_.zeroed_joint_.zeroing_position_;
-      top_claw_motor_.zeroed_joint_.zeroing_position_ = 100.0;
-      saved_zeroing_position[BOTTOM_CLAW] =
-          bottom_claw_motor_.zeroed_joint_.zeroing_position_;
-      top_claw_motor_.zeroed_joint_.zeroing_position_ = 100.0;
-    } else {
-      if (i == 51) {
-        EXPECT_TRUE(claw_motor_.top().is_zeroing());
-        EXPECT_TRUE(claw_motor_.bottom().is_zeroing());
-        EXPECT_NEAR(saved_zeroing_position[TOP_CLAW],
-                    claw_motor_.top().zeroing_position_, 0.4);
-        EXPECT_NEAR(saved_zeroing_position[BOTTOM_CLAW],
-                    claw_motor_.bottom().zeroing_position_, 0.4);
-      }
-    }
-    if (!top_claw_motor_.is_ready()) {
-      if (top_claw_motor_.capped_goal()) {
-        ++capped_count[TOP_CLAW];
-        // The cycle after we kick the zero position is the only cycle during
-        // which we should expect to see a high uncapped power during zeroing.
-        ASSERT_LT(5, ::std::abs(claw_motor_.top().zeroed_joint_.U_uncapped()));
-      } else {
-        ASSERT_GT(5, ::std::abs(claw_motor_.top().zeroed_joint_.U_uncapped()));
-      }
-    }
-    if (!bottom_claw_motor_.is_ready()) {
-      if (bottom_claw_motor_.capped_goal()) {
-        ++capped_count[BOTTOM_CLAW];
-        // The cycle after we kick the zero position is the only cycle during
-        // which we should expect to see a high uncapped power during zeroing.
-        ASSERT_LT(5, ::std::abs(claw_motor_.bottom().zeroed_joint_.U_uncapped()));
-      } else {
-        ASSERT_GT(5, ::std::abs(claw_motor_.bottom().zeroed_joint_.U_uncapped()));
-      }
-    }
-
-    claw_motor_.Iterate();
-    claw_motor_plant_.Simulate();
-    SendDSPacket(true);
-  }
-  VerifyNearGoal();
-  EXPECT_GT(3, capped_count[TOP_CLAW]);
-  EXPECT_GT(3, capped_count[BOTTOM_CLAW]);
-}
 */
 
+class WindupClawTest : public ClawTest {
+ protected:
+  void TestWindup(ClawMotor::CalibrationMode mode, int start_time, double offset) {
+    int capped_count = 0;
+    double saved_zeroing_position[2] = {0, 0};
+    const frc971::constants::Values& values = constants::GetValues();
+    bool kicked = false;
+    bool measured = false;
+    for (int i = 0; i < 600; ++i) {
+      claw_motor_plant_.SendPositionMessage();
+      if (i >= start_time && mode == claw_motor_.mode() && !kicked) {
+        EXPECT_EQ(mode, claw_motor_.mode());
+        // Move the zeroing position far away and verify that it gets moved
+        // back.
+        saved_zeroing_position[TOP_CLAW] = claw_motor_.top_claw_goal_;
+        saved_zeroing_position[BOTTOM_CLAW] = claw_motor_.bottom_claw_goal_;
+        claw_motor_.top_claw_goal_ += offset;
+        claw_motor_.bottom_claw_goal_ += offset;
+        kicked = true;
+      } else {
+        if (kicked && !measured) {
+          measured = true;
+          EXPECT_EQ(mode, claw_motor_.mode());
+
+          EXPECT_NEAR(saved_zeroing_position[TOP_CLAW],
+                      claw_motor_.top_claw_goal_, 0.1);
+          EXPECT_NEAR(saved_zeroing_position[BOTTOM_CLAW],
+                      claw_motor_.bottom_claw_goal_, 0.1);
+        }
+      }
+      if (claw_motor_.mode() == mode) {
+        if (claw_motor_.capped_goal()) {
+          ++capped_count;
+          // The cycle after we kick the zero position is the only cycle during
+          // which we should expect to see a high uncapped power during zeroing.
+          ASSERT_LT(values.claw.max_zeroing_voltage,
+                    ::std::abs(claw_motor_.uncapped_average_voltage()));
+        } else {
+          ASSERT_GT(values.claw.max_zeroing_voltage,
+                    ::std::abs(claw_motor_.uncapped_average_voltage()));
+        }
+      }
+
+      claw_motor_.Iterate();
+      claw_motor_plant_.Simulate();
+      SendDSPacket(true);
+    }
+    EXPECT_TRUE(kicked);
+    EXPECT_TRUE(measured);
+    EXPECT_EQ(1, capped_count);
+  }
+};
+
+// Tests that the wrist can't get too far away from the zeroing position if the
+// zeroing position is saturating the goal.
+TEST_F(WindupClawTest, NoWindupPositive) {
+  claw_queue_group.goal.MakeWithBuilder()
+      .bottom_angle(0.1)
+      .seperation_angle(0.2)
+      .Send();
+
+  TestWindup(ClawMotor::UNKNOWN_LOCATION, 100, 971.0);
+
+  VerifyNearGoal();
+}
+
+// Tests that the wrist can't get too far away from the zeroing position if the
+// zeroing position is saturating the goal.
+TEST_F(WindupClawTest, NoWindupNegative) {
+  claw_queue_group.goal.MakeWithBuilder()
+      .bottom_angle(0.1)
+      .seperation_angle(0.2)
+      .Send();
+
+  TestWindup(ClawMotor::UNKNOWN_LOCATION, 100, -971.0);
+
+  VerifyNearGoal();
+}
+
+// Tests that the wrist can't get too far away from the zeroing position if the
+// zeroing position is saturating the goal.
+TEST_F(WindupClawTest, NoWindupNegativeFineTune) {
+  claw_queue_group.goal.MakeWithBuilder()
+      .bottom_angle(0.1)
+      .seperation_angle(0.2)
+      .Send();
+
+  TestWindup(ClawMotor::FINE_TUNE_BOTTOM, 200, -971.0);
+
+  VerifyNearGoal();
+}
+
 }  // namespace testing
 }  // namespace control_loops
 }  // namespace frc971