Add libgmp 6.2.0 to third_party
Don't build it yet. That will come in the next review.
Change-Id: Idf3266558165e5ab45f4a41c98cc8c838c8244d5
diff --git a/third_party/gmp/demos/calc/Makefile.am b/third_party/gmp/demos/calc/Makefile.am
new file mode 100644
index 0000000..1cb5335
--- /dev/null
+++ b/third_party/gmp/demos/calc/Makefile.am
@@ -0,0 +1,47 @@
+## Process this file with automake to generate Makefile.in
+
+# Copyright 2000-2004 Free Software Foundation, Inc.
+#
+# This file is part of the GNU MP Library.
+#
+# The GNU MP Library is free software; you can redistribute it and/or modify
+# it under the terms of either:
+#
+# * the GNU Lesser General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your
+# option) any later version.
+#
+# or
+#
+# * the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any
+# later version.
+#
+# or both in parallel, as here.
+#
+# The GNU MP Library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received copies of the GNU General Public License and the
+# GNU Lesser General Public License along with the GNU MP Library. If not,
+# see https://www.gnu.org/licenses/.
+
+
+AM_CPPFLAGS = -I$(top_srcdir)
+
+# $(LEXLIB) is not actually needed for flex (which means the distributed
+# calclex.c), but it's included here for the benefit of anyone rebuilding
+# with some other lex.
+#
+LDADD = $(top_builddir)/libgmp.la $(LIBREADLINE) $(LIBCURSES) $(LEXLIB)
+
+EXTRA_PROGRAMS = calc
+AM_YFLAGS = -d
+calc_SOURCES = calc.y calclex.l calcread.c calc-common.h
+BUILT_SOURCES = calc.h
+
+CLEANFILES = $(EXTRA_PROGRAMS)
+
+allprogs: $(EXTRA_PROGRAMS)
diff --git a/third_party/gmp/demos/calc/Makefile.in b/third_party/gmp/demos/calc/Makefile.in
new file mode 100644
index 0000000..5feb9a8
--- /dev/null
+++ b/third_party/gmp/demos/calc/Makefile.in
@@ -0,0 +1,677 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright 2000-2004 Free Software Foundation, Inc.
+#
+# This file is part of the GNU MP Library.
+#
+# The GNU MP Library is free software; you can redistribute it and/or modify
+# it under the terms of either:
+#
+# * the GNU Lesser General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your
+# option) any later version.
+#
+# or
+#
+# * the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any
+# later version.
+#
+# or both in parallel, as here.
+#
+# The GNU MP Library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received copies of the GNU General Public License and the
+# GNU Lesser General Public License along with the GNU MP Library. If not,
+# see https://www.gnu.org/licenses/.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+EXTRA_PROGRAMS = calc$(EXEEXT)
+subdir = demos/calc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = calc-config.h
+CONFIG_CLEAN_VPATH_FILES =
+am_calc_OBJECTS = calc.$(OBJEXT) calclex.$(OBJEXT) calcread.$(OBJEXT)
+calc_OBJECTS = $(am_calc_OBJECTS)
+calc_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+calc_DEPENDENCIES = $(top_builddir)/libgmp.la $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ ||
+LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
+LTLEXCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS)
+AM_V_LEX = $(am__v_LEX_@AM_V@)
+am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@)
+am__v_LEX_0 = @echo " LEX " $@;
+am__v_LEX_1 =
+YLWRAP = $(top_srcdir)/ylwrap
+@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
+am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
+ -e s/c++$$/h++/ -e s/c$$/h/
+YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
+LTYACCCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS)
+AM_V_YACC = $(am__v_YACC_@AM_V@)
+am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
+am__v_YACC_0 = @echo " YACC " $@;
+am__v_YACC_1 =
+SOURCES = $(calc_SOURCES)
+DIST_SOURCES = $(calc_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/calc-config-h.in \
+ $(top_srcdir)/ylwrap README calc.c calc.h calclex.c
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ABI = @ABI@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+ASMFLAGS = @ASMFLAGS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
+CC = @CC@
+CCAS = @CCAS@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
+DEFS = @DEFS@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
+FGREP = @FGREP@
+GMP_LDFLAGS = @GMP_LDFLAGS@
+GMP_LIMB_BITS = @GMP_LIMB_BITS@
+GMP_NAIL_BITS = @GMP_NAIL_BITS@
+GREP = @GREP@
+HAVE_CLOCK_01 = @HAVE_CLOCK_01@
+HAVE_CPUTIME_01 = @HAVE_CPUTIME_01@
+HAVE_GETRUSAGE_01 = @HAVE_GETRUSAGE_01@
+HAVE_GETTIMEOFDAY_01 = @HAVE_GETTIMEOFDAY_01@
+HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@
+HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@
+HAVE_SIGACTION_01 = @HAVE_SIGACTION_01@
+HAVE_SIGALTSTACK_01 = @HAVE_SIGALTSTACK_01@
+HAVE_SIGSTACK_01 = @HAVE_SIGSTACK_01@
+HAVE_STACK_T_01 = @HAVE_STACK_T_01@
+HAVE_SYS_RESOURCE_H_01 = @HAVE_SYS_RESOURCE_H_01@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBCURSES = @LIBCURSES@
+LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
+LIBGMP_DLL = @LIBGMP_DLL@
+LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
+LIBM = @LIBM@
+LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
+LIBOBJS = @LIBOBJS@
+LIBREADLINE = @LIBREADLINE@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+M4 = @M4@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
+STRIP = @STRIP@
+TAL_OBJECT = @TAL_OBJECT@
+TUNE_LIBS = @TUNE_LIBS@
+TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
+U_FOR_BUILD = @U_FOR_BUILD@
+VERSION = @VERSION@
+WITH_READLINE_01 = @WITH_READLINE_01@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gmp_srclinks = @gmp_srclinks@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+mpn_objects = @mpn_objects@
+mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = -I$(top_srcdir)
+
+# $(LEXLIB) is not actually needed for flex (which means the distributed
+# calclex.c), but it's included here for the benefit of anyone rebuilding
+# with some other lex.
+#
+LDADD = $(top_builddir)/libgmp.la $(LIBREADLINE) $(LIBCURSES) $(LEXLIB)
+AM_YFLAGS = -d
+calc_SOURCES = calc.y calclex.l calcread.c calc-common.h
+BUILT_SOURCES = calc.h
+CLEANFILES = $(EXTRA_PROGRAMS)
+all: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .l .lo .o .obj .y
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps demos/calc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu --ignore-deps demos/calc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+calc-config.h: $(top_builddir)/config.status $(srcdir)/calc-config-h.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+calc.h: calc.c
+ @if test ! -f $@; then rm -f calc.c; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) calc.c; else :; fi
+
+calc$(EXEEXT): $(calc_OBJECTS) $(calc_DEPENDENCIES) $(EXTRA_calc_DEPENDENCIES)
+ @rm -f calc$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(calc_OBJECTS) $(calc_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+.c.o:
+ $(AM_V_CC)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+ $(AM_V_CC)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $<
+
+.l.c:
+ $(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
+
+.y.c:
+ $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile
+installdirs:
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -rm -f calc.c
+ -rm -f calc.h
+ -rm -f calclex.c
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: all check install install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libtool cscopelist-am ctags ctags-am distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+allprogs: $(EXTRA_PROGRAMS)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/third_party/gmp/demos/calc/README b/third_party/gmp/demos/calc/README
new file mode 100644
index 0000000..660394e
--- /dev/null
+++ b/third_party/gmp/demos/calc/README
@@ -0,0 +1,65 @@
+Copyright 2001 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/.
+
+
+
+
+ DEMONSTRATION CALCULATOR PROGRAM
+
+
+This is a simple program, meant only to show one way to use GMP with yacc
+and lex to make a calculator. Usage and comments on the implementation can
+be found in calc.y.
+
+Within a GMP build tree, the generated Makefile can be used to build the
+program,
+
+ make calc
+
+(or on a DOS system, "make calc.exe").
+
+Elsewhere, once GMP has been installed, the program can be compiled with for
+instance
+
+ gcc calc.c calclex.c -lgmp -o calc
+
+Or if GNU readline is used then
+
+ gcc calc.c calclex.c calcread.c -lgmp -lreadline -o calc
+
+(again, on a DOS system "-o calc.exe").
+
+Readline support can be enabled or disabled in calc-config.h. That file is
+created by the GMP ./configure based on the --with-readline option. The
+default is --with-readline=detect, which means to use readline if available.
+"yes" can be used to force it to be used, or "no" to not use it.
+
+The supplied calc.c was generated by GNU bison, but a standard yacc should
+work too.
+
+The supplied calclex.c was generated by GNU flex, but a standard lex should
+work too. The readline support may or may not work with a standard lex (see
+comments with input() in calcread.c). Note also that a standard lex will
+require its library "-ll" on the compile command line. "./configure" sets
+this up in the GMP build tree Makefile.
+
+
+
+----------------
+Local variables:
+mode: text
+fill-column: 76
+End:
diff --git a/third_party/gmp/demos/calc/calc-common.h b/third_party/gmp/demos/calc/calc-common.h
new file mode 100644
index 0000000..7a91878
--- /dev/null
+++ b/third_party/gmp/demos/calc/calc-common.h
@@ -0,0 +1,35 @@
+/* Prototypes etc for calc program.
+
+Copyright 2001 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+#include <stddef.h> /* for size_t */
+#ifndef NO_CALC_H
+#include "calc.h"
+#endif
+#include "calc-config.h"
+
+struct calc_keywords_t {
+ char *name;
+ int value;
+};
+
+extern int calc_option_readline;
+extern int calc_more_input;
+extern const struct calc_keywords_t calc_keywords[];
+
+int calc_input (char *buf, size_t max_size);
+void calc_init_readline (void);
diff --git a/third_party/gmp/demos/calc/calc-config-h.in b/third_party/gmp/demos/calc/calc-config-h.in
new file mode 100644
index 0000000..42cdd44
--- /dev/null
+++ b/third_party/gmp/demos/calc/calc-config-h.in
@@ -0,0 +1,21 @@
+/* Templates for calc program configuration. -*- mode:c -*-
+
+Copyright 2001 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+
+/* Define if GNU readline should be used. */
+#define WITH_READLINE @WITH_READLINE_01@
diff --git a/third_party/gmp/demos/calc/calc.c b/third_party/gmp/demos/calc/calc.c
new file mode 100644
index 0000000..cc653a2
--- /dev/null
+++ b/third_party/gmp/demos/calc/calc.c
@@ -0,0 +1,1148 @@
+/* original parser id follows */
+/* yysccsid[] = "@(#)yaccpar 1.9 (Berkeley) 02/21/93" */
+/* (use YYMAJOR/YYMINOR for ifdefs dependent on parser version) */
+
+#define YYBYACC 1
+#define YYMAJOR 1
+#define YYMINOR 9
+#define YYPATCH 20170201
+
+#define YYEMPTY (-1)
+#define yyclearin (yychar = YYEMPTY)
+#define yyerrok (yyerrflag = 0)
+#define YYRECOVERING() (yyerrflag != 0)
+#define YYENOMEM (-2)
+#define YYEOF 0
+#define YYPREFIX "yy"
+
+#define YYPURE 0
+
+#line 2 "../../../gmp/demos/calc/calc.y"
+/* A simple integer desk calculator using yacc and gmp.
+
+Copyright 2000-2002 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+
+/* This is a simple program, meant only to show one way to use GMP for this
+ sort of thing. There's few features, and error checking is minimal.
+ Standard input is read, calc_help() below shows the inputs accepted.
+
+ Expressions are evaluated as they're read. If user defined functions
+ were wanted it'd be necessary to build a parse tree like pexpr.c does, or
+ a list of operations for a stack based evaluator. That would also make
+ it possible to detect and optimize evaluations "mod m" like pexpr.c does.
+
+ A stack is used for intermediate values in the expression evaluation,
+ separate from the yacc parser stack. This is simple, makes error
+ recovery easy, minimizes the junk around mpz calls in the rules, and
+ saves initializing or clearing "mpz_t"s during a calculation. A
+ disadvantage though is that variables must be copied to the stack to be
+ worked on. A more sophisticated calculator or language system might be
+ able to avoid that when executing a compiled or semi-compiled form.
+
+ Avoiding repeated initializing and clearing of "mpz_t"s is important. In
+ this program the time spent parsing is obviously much greater than any
+ possible saving from this, but a proper calculator or language should
+ take some trouble over it. Don't be surprised if an init/clear takes 3
+ or more times as long as a 10 limb addition, depending on the system (see
+ the mpz_init_realloc_clear example in tune/README). */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "gmp.h"
+#define NO_CALC_H /* because it conflicts with normal calc.c stuff */
+#include "calc-common.h"
+
+
+#define numberof(x) (sizeof (x) / sizeof ((x)[0]))
+
+
+void
+calc_help (void)
+{
+ printf ("Examples:\n");
+ printf (" 2+3*4 expressions are evaluated\n");
+ printf (" x=5^6 variables a to z can be set and used\n");
+ printf ("Operators:\n");
+ printf (" + - * arithmetic\n");
+ printf (" / %% division and remainder (rounding towards negative infinity)\n");
+ printf (" ^ exponentiation\n");
+ printf (" ! factorial\n");
+ printf (" << >> left and right shifts\n");
+ printf (" <= >= > \\ comparisons, giving 1 if true, 0 if false\n");
+ printf (" == != < /\n");
+ printf (" && || logical and/or, giving 1 if true, 0 if false\n");
+ printf ("Functions:\n");
+ printf (" abs(n) absolute value\n");
+ printf (" bin(n,m) binomial coefficient\n");
+ printf (" fib(n) fibonacci number\n");
+ printf (" gcd(a,b,..) greatest common divisor\n");
+ printf (" kron(a,b) kronecker symbol\n");
+ printf (" lcm(a,b,..) least common multiple\n");
+ printf (" lucnum(n) lucas number\n");
+ printf (" nextprime(n) next prime after n\n");
+ printf (" powm(b,e,m) modulo powering, b^e%%m\n");
+ printf (" root(n,r) r-th root\n");
+ printf (" sqrt(n) square root\n");
+ printf ("Other:\n");
+ printf (" hex \\ set hex or decimal for input and output\n");
+ printf (" decimal / (\"0x\" can be used for hex too)\n");
+ printf (" quit exit program (EOF works too)\n");
+ printf (" ; statements are separated with a ; or newline\n");
+ printf (" \\ continue expressions with \\ before newline\n");
+ printf (" # xxx comments are # though to newline\n");
+ printf ("Hex numbers must be entered in upper case, to distinguish them from the\n");
+ printf ("variables a to f (like in bc).\n");
+}
+
+
+int ibase = 0;
+int obase = 10;
+
+
+/* The stack is a fixed size, which means there's a limit on the nesting
+ allowed in expressions. A more sophisticated program could let it grow
+ dynamically. */
+
+mpz_t stack[100];
+mpz_ptr sp = stack[0];
+
+#define CHECK_OVERFLOW() \
+ if (sp >= stack[numberof(stack)]) /* FIXME */ \
+ { \
+ fprintf (stderr, \
+ "Value stack overflow, too much nesting in expression\n"); \
+ YYERROR; \
+ }
+
+#define CHECK_EMPTY() \
+ if (sp != stack[0]) \
+ { \
+ fprintf (stderr, "Oops, expected the value stack to be empty\n"); \
+ sp = stack[0]; \
+ }
+
+
+mpz_t variable[26];
+
+#define CHECK_VARIABLE(var) \
+ if ((var) < 0 || (var) >= numberof (variable)) \
+ { \
+ fprintf (stderr, "Oops, bad variable somehow: %d\n", var); \
+ YYERROR; \
+ }
+
+
+#define CHECK_UI(name,z) \
+ if (! mpz_fits_ulong_p (z)) \
+ { \
+ fprintf (stderr, "%s too big\n", name); \
+ YYERROR; \
+ }
+
+#ifdef YYSTYPE
+#undef YYSTYPE_IS_DECLARED
+#define YYSTYPE_IS_DECLARED 1
+#endif
+#ifndef YYSTYPE_IS_DECLARED
+#define YYSTYPE_IS_DECLARED 1
+#line 142 "../../../gmp/demos/calc/calc.y"
+typedef union {
+ char *str;
+ int var;
+} YYSTYPE;
+#endif /* !YYSTYPE_IS_DECLARED */
+#line 172 "calc.c"
+
+/* compatibility with bison */
+#ifdef YYPARSE_PARAM
+/* compatibility with FreeBSD */
+# ifdef YYPARSE_PARAM_TYPE
+# define YYPARSE_DECL() yyparse(YYPARSE_PARAM_TYPE YYPARSE_PARAM)
+# else
+# define YYPARSE_DECL() yyparse(void *YYPARSE_PARAM)
+# endif
+#else
+# define YYPARSE_DECL() yyparse(void)
+#endif
+
+/* Parameters sent to lex. */
+#ifdef YYLEX_PARAM
+# define YYLEX_DECL() yylex(void *YYLEX_PARAM)
+# define YYLEX yylex(YYLEX_PARAM)
+#else
+# define YYLEX_DECL() yylex(void)
+# define YYLEX yylex()
+#endif
+
+/* Parameters sent to yyerror. */
+#ifndef YYERROR_DECL
+#define YYERROR_DECL() yyerror(const char *s)
+#endif
+#ifndef YYERROR_CALL
+#define YYERROR_CALL(msg) yyerror(msg)
+#endif
+
+extern int YYPARSE_DECL();
+
+#define EOS 257
+#define BAD 258
+#define HELP 259
+#define HEX 260
+#define DECIMAL 261
+#define QUIT 262
+#define ABS 263
+#define BIN 264
+#define FIB 265
+#define GCD 266
+#define KRON 267
+#define LCM 268
+#define LUCNUM 269
+#define NEXTPRIME 270
+#define POWM 271
+#define ROOT 272
+#define SQRT 273
+#define NUMBER 274
+#define VARIABLE 275
+#define LOR 276
+#define LAND 277
+#define EQ 278
+#define NE 279
+#define LE 280
+#define GE 281
+#define LSHIFT 282
+#define RSHIFT 283
+#define UMINUS 284
+#define YYERRCODE 256
+typedef int YYINT;
+static const YYINT yylhs[] = { -1,
+ 0, 0, 2, 2, 2, 1, 1, 1, 1, 1,
+ 1, 1, 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 3, 3, 4, 4, 5, 5,
+};
+static const YYINT yylen[] = { 2,
+ 1, 2, 2, 3, 2, 0, 1, 3, 1, 1,
+ 1, 1, 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 2, 2, 3, 3, 3, 3, 3, 3, 3,
+ 3, 4, 6, 4, 4, 6, 4, 4, 4, 8,
+ 6, 4, 1, 1, 1, 3, 1, 3,
+};
+static const YYINT yydefred[] = { 0,
+ 0, 9, 10, 11, 12, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 44, 0, 0, 0,
+ 0, 0, 0, 0, 5, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 43, 0, 0,
+ 3, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 22, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 13, 4, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 32, 0, 34, 35, 0, 0, 37, 0, 38,
+ 39, 0, 0, 42, 0, 0, 0, 0, 0, 0,
+ 33, 36, 0, 41, 0, 40,
+};
+static const YYINT yydgoto[] = { 21,
+ 22, 23, 24, 64, 67,
+};
+static const YYINT yysindex[] = { 742,
+ -257, 0, 0, 0, 0, -22, -20, -17, -5, 5,
+ 18, 20, 22, 25, 28, 29, 0, -54, 808, 808,
+ 0, -244, 786, 667, 0, 808, 808, 808, 808, 808,
+ 808, 808, 808, 808, 808, 808, 808, 0, -27, 203,
+ 0, -217, 808, 808, 808, 808, 808, 808, 808, 808,
+ 808, 808, 808, 808, 808, 808, 808, 808, 0, 454,
+ 465, 487, 667, -33, 498, 667, -16, 520, 531, 542,
+ 564, 586, 667, 0, 0, 678, 929, -28, -28, -28,
+ -28, -28, -28, -21, -21, -6, -6, -27, -27, -27,
+ -27, 0, 808, 0, 0, 808, 808, 0, 808, 0,
+ 0, 808, 808, 0, 597, 667, 608, 667, 619, 645,
+ 0, 0, 808, 0, 656, 0,
+};
+static const YYINT yyrindex[] = { 2,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
+ 0, 50, 2, 3, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 10, 0,
+ 0, 71, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, -12, 0, 0, -11, 0, 0, 0, 0,
+ 0, 0, 4, 0, 0, 193, 64, 166, 178, 182,
+ 187, 189, 191, 139, 151, 112, 124, 37, 49, 76,
+ 85, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, -2, 0, 15, 0, 0,
+ 0, 0, 0, 0, 0, 0,
+};
+static const YYINT yygindex[] = { 0,
+ 52, 0, 1065, 0, 0,
+};
+#define YYTABLESIZE 1212
+static const YYINT yytable[] = { 25,
+ 43, 6, 7, 8, 59, 59, 37, 95, 57, 23,
+ 96, 59, 41, 55, 53, 57, 54, 26, 56, 27,
+ 55, 53, 28, 54, 98, 56, 59, 99, 45, 47,
+ 57, 45, 47, 43, 29, 55, 16, 43, 46, 75,
+ 56, 46, 43, 43, 30, 43, 23, 43, 17, 1,
+ 23, 23, 23, 23, 23, 48, 23, 31, 48, 32,
+ 43, 33, 43, 30, 34, 58, 58, 35, 36, 23,
+ 2, 23, 58, 16, 42, 18, 0, 16, 16, 16,
+ 16, 16, 0, 16, 19, 17, 0, 58, 0, 17,
+ 17, 17, 17, 17, 43, 17, 16, 0, 16, 0,
+ 0, 0, 0, 0, 30, 0, 0, 30, 17, 0,
+ 17, 14, 18, 0, 0, 0, 18, 18, 18, 18,
+ 18, 19, 18, 15, 0, 19, 19, 19, 19, 19,
+ 0, 19, 0, 0, 0, 18, 0, 18, 20, 0,
+ 0, 0, 0, 0, 19, 0, 19, 0, 0, 0,
+ 21, 0, 14, 0, 14, 14, 14, 0, 0, 0,
+ 0, 0, 0, 0, 15, 24, 15, 15, 15, 0,
+ 0, 14, 0, 14, 0, 0, 0, 29, 0, 20,
+ 0, 26, 20, 15, 0, 15, 27, 0, 25, 0,
+ 28, 21, 31, 0, 21, 0, 0, 0, 20, 0,
+ 20, 0, 0, 0, 0, 0, 24, 0, 0, 24,
+ 21, 0, 21, 0, 0, 0, 0, 0, 29, 0,
+ 0, 29, 26, 0, 0, 26, 0, 27, 0, 25,
+ 27, 28, 25, 31, 28, 59, 31, 0, 0, 57,
+ 0, 0, 0, 74, 55, 53, 0, 54, 0, 56,
+ 0, 0, 0, 51, 52, 0, 0, 43, 6, 7,
+ 8, 0, 45, 0, 46, 0, 23, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 43, 43, 43, 43,
+ 43, 43, 43, 43, 0, 23, 23, 23, 23, 23,
+ 23, 23, 23, 16, 0, 0, 58, 0, 0, 0,
+ 0, 0, 0, 0, 0, 17, 0, 0, 0, 0,
+ 0, 0, 16, 16, 16, 16, 16, 16, 16, 16,
+ 30, 0, 0, 0, 17, 17, 17, 17, 17, 17,
+ 17, 17, 18, 0, 0, 0, 0, 0, 0, 30,
+ 30, 19, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 18, 18, 18, 18, 18, 18, 18, 18, 0,
+ 19, 19, 19, 19, 19, 19, 19, 19, 14, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 15, 0, 0, 0, 0, 0, 0, 14, 14, 14,
+ 14, 14, 14, 14, 14, 20, 0, 0, 0, 15,
+ 15, 15, 15, 15, 15, 15, 15, 21, 0, 0,
+ 0, 0, 0, 0, 20, 20, 20, 20, 20, 20,
+ 20, 20, 24, 0, 0, 0, 21, 21, 21, 21,
+ 21, 21, 21, 21, 29, 0, 0, 0, 26, 0,
+ 0, 24, 24, 27, 0, 25, 0, 28, 0, 31,
+ 0, 0, 0, 29, 29, 0, 0, 26, 26, 0,
+ 0, 0, 27, 27, 25, 25, 28, 28, 31, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 43, 44,
+ 47, 48, 49, 50, 51, 52, 59, 0, 0, 0,
+ 57, 0, 0, 0, 92, 55, 53, 59, 54, 0,
+ 56, 57, 0, 0, 0, 0, 55, 53, 93, 54,
+ 0, 56, 0, 45, 0, 46, 0, 0, 0, 59,
+ 0, 0, 0, 57, 45, 0, 46, 94, 55, 53,
+ 59, 54, 0, 56, 57, 0, 0, 0, 0, 55,
+ 53, 97, 54, 0, 56, 0, 45, 58, 46, 0,
+ 0, 0, 59, 0, 0, 0, 57, 45, 58, 46,
+ 100, 55, 53, 59, 54, 0, 56, 57, 0, 0,
+ 0, 101, 55, 53, 59, 54, 0, 56, 57, 45,
+ 58, 46, 0, 55, 53, 102, 54, 0, 56, 0,
+ 45, 58, 46, 0, 0, 0, 59, 0, 0, 0,
+ 57, 45, 0, 46, 0, 55, 53, 103, 54, 0,
+ 56, 0, 0, 58, 0, 0, 0, 0, 59, 0,
+ 0, 0, 57, 45, 58, 46, 104, 55, 53, 59,
+ 54, 0, 56, 57, 0, 58, 0, 111, 55, 53,
+ 59, 54, 0, 56, 57, 45, 0, 46, 112, 55,
+ 53, 59, 54, 0, 56, 57, 45, 58, 46, 0,
+ 55, 53, 113, 54, 0, 56, 0, 45, 0, 46,
+ 0, 0, 0, 0, 0, 0, 0, 59, 45, 58,
+ 46, 57, 0, 0, 0, 114, 55, 53, 59, 54,
+ 58, 56, 57, 0, 0, 0, 116, 55, 53, 59,
+ 54, 58, 56, 57, 45, 0, 46, 0, 55, 53,
+ 59, 54, 58, 56, 57, 45, 0, 46, 0, 55,
+ 53, 0, 54, 0, 56, 0, 45, 0, 46, 43,
+ 44, 47, 48, 49, 50, 51, 52, 45, 58, 46,
+ 43, 44, 47, 48, 49, 50, 51, 52, 0, 58,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 58, 0, 43, 44, 47, 48, 49, 50, 51, 52,
+ 0, 58, 0, 43, 44, 47, 48, 49, 50, 51,
+ 52, 20, 0, 0, 0, 0, 19, 0, 0, 0,
+ 0, 0, 0, 0, 0, 43, 44, 47, 48, 49,
+ 50, 51, 52, 0, 0, 0, 43, 44, 47, 48,
+ 49, 50, 51, 52, 0, 0, 0, 43, 44, 47,
+ 48, 49, 50, 51, 52, 20, 0, 0, 0, 0,
+ 19, 0, 0, 0, 0, 0, 0, 0, 0, 43,
+ 44, 47, 48, 49, 50, 51, 52, 20, 0, 0,
+ 0, 0, 19, 0, 0, 0, 0, 0, 0, 0,
+ 0, 43, 44, 47, 48, 49, 50, 51, 52, 0,
+ 0, 0, 43, 44, 47, 48, 49, 50, 51, 52,
+ 0, 0, 0, 43, 44, 47, 48, 49, 50, 51,
+ 52, 0, 0, 0, 43, 44, 47, 48, 49, 50,
+ 51, 52, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 43, 44, 47, 48, 49, 50, 51, 52, 0, 0,
+ 0, 43, 44, 47, 48, 49, 50, 51, 52, 0,
+ 0, 0, 43, 44, 47, 48, 49, 50, 51, 52,
+ 0, 0, 0, 0, 44, 47, 48, 49, 50, 51,
+ 52, 59, 0, 0, 0, 57, 0, 0, 0, 0,
+ 55, 53, 0, 54, 0, 56, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 45, 0,
+ 46, 0, 0, 0, 0, 0, 0, 1, 0, 0,
+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+ 12, 13, 14, 15, 16, 17, 18, 0, 0, 0,
+ 0, 0, 58, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
+ 18, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 38, 39, 40, 0, 0, 0, 0, 0,
+ 60, 61, 62, 63, 65, 66, 68, 69, 70, 71,
+ 72, 73, 0, 0, 0, 0, 0, 76, 77, 78,
+ 79, 80, 81, 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 105, 0, 0,
+ 106, 107, 0, 108, 0, 0, 109, 110, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 115, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 47, 48, 49, 50,
+ 51, 52,
+};
+static const YYINT yycheck[] = { 257,
+ 0, 0, 0, 0, 33, 33, 61, 41, 37, 0,
+ 44, 33, 257, 42, 43, 37, 45, 40, 47, 40,
+ 42, 43, 40, 45, 41, 47, 33, 44, 41, 41,
+ 37, 44, 44, 33, 40, 42, 0, 37, 41, 257,
+ 47, 44, 42, 43, 40, 45, 37, 47, 0, 0,
+ 41, 42, 43, 44, 45, 41, 47, 40, 44, 40,
+ 60, 40, 62, 0, 40, 94, 94, 40, 40, 60,
+ 0, 62, 94, 37, 23, 0, -1, 41, 42, 43,
+ 44, 45, -1, 47, 0, 37, -1, 94, -1, 41,
+ 42, 43, 44, 45, 94, 47, 60, -1, 62, -1,
+ -1, -1, -1, -1, 41, -1, -1, 44, 60, -1,
+ 62, 0, 37, -1, -1, -1, 41, 42, 43, 44,
+ 45, 37, 47, 0, -1, 41, 42, 43, 44, 45,
+ -1, 47, -1, -1, -1, 60, -1, 62, 0, -1,
+ -1, -1, -1, -1, 60, -1, 62, -1, -1, -1,
+ 0, -1, 41, -1, 43, 44, 45, -1, -1, -1,
+ -1, -1, -1, -1, 41, 0, 43, 44, 45, -1,
+ -1, 60, -1, 62, -1, -1, -1, 0, -1, 41,
+ -1, 0, 44, 60, -1, 62, 0, -1, 0, -1,
+ 0, 41, 0, -1, 44, -1, -1, -1, 60, -1,
+ 62, -1, -1, -1, -1, -1, 41, -1, -1, 44,
+ 60, -1, 62, -1, -1, -1, -1, -1, 41, -1,
+ -1, 44, 41, -1, -1, 44, -1, 41, -1, 41,
+ 44, 41, 44, 41, 44, 33, 44, -1, -1, 37,
+ -1, -1, -1, 41, 42, 43, -1, 45, -1, 47,
+ -1, -1, -1, 282, 283, -1, -1, 257, 257, 257,
+ 257, -1, 60, -1, 62, -1, 257, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, 276, 277, 278, 279,
+ 280, 281, 282, 283, -1, 276, 277, 278, 279, 280,
+ 281, 282, 283, 257, -1, -1, 94, -1, -1, -1,
+ -1, -1, -1, -1, -1, 257, -1, -1, -1, -1,
+ -1, -1, 276, 277, 278, 279, 280, 281, 282, 283,
+ 257, -1, -1, -1, 276, 277, 278, 279, 280, 281,
+ 282, 283, 257, -1, -1, -1, -1, -1, -1, 276,
+ 277, 257, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, 276, 277, 278, 279, 280, 281, 282, 283, -1,
+ 276, 277, 278, 279, 280, 281, 282, 283, 257, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 257, -1, -1, -1, -1, -1, -1, 276, 277, 278,
+ 279, 280, 281, 282, 283, 257, -1, -1, -1, 276,
+ 277, 278, 279, 280, 281, 282, 283, 257, -1, -1,
+ -1, -1, -1, -1, 276, 277, 278, 279, 280, 281,
+ 282, 283, 257, -1, -1, -1, 276, 277, 278, 279,
+ 280, 281, 282, 283, 257, -1, -1, -1, 257, -1,
+ -1, 276, 277, 257, -1, 257, -1, 257, -1, 257,
+ -1, -1, -1, 276, 277, -1, -1, 276, 277, -1,
+ -1, -1, 276, 277, 276, 277, 276, 277, 276, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, 276, 277,
+ 278, 279, 280, 281, 282, 283, 33, -1, -1, -1,
+ 37, -1, -1, -1, 41, 42, 43, 33, 45, -1,
+ 47, 37, -1, -1, -1, -1, 42, 43, 44, 45,
+ -1, 47, -1, 60, -1, 62, -1, -1, -1, 33,
+ -1, -1, -1, 37, 60, -1, 62, 41, 42, 43,
+ 33, 45, -1, 47, 37, -1, -1, -1, -1, 42,
+ 43, 44, 45, -1, 47, -1, 60, 94, 62, -1,
+ -1, -1, 33, -1, -1, -1, 37, 60, 94, 62,
+ 41, 42, 43, 33, 45, -1, 47, 37, -1, -1,
+ -1, 41, 42, 43, 33, 45, -1, 47, 37, 60,
+ 94, 62, -1, 42, 43, 44, 45, -1, 47, -1,
+ 60, 94, 62, -1, -1, -1, 33, -1, -1, -1,
+ 37, 60, -1, 62, -1, 42, 43, 44, 45, -1,
+ 47, -1, -1, 94, -1, -1, -1, -1, 33, -1,
+ -1, -1, 37, 60, 94, 62, 41, 42, 43, 33,
+ 45, -1, 47, 37, -1, 94, -1, 41, 42, 43,
+ 33, 45, -1, 47, 37, 60, -1, 62, 41, 42,
+ 43, 33, 45, -1, 47, 37, 60, 94, 62, -1,
+ 42, 43, 44, 45, -1, 47, -1, 60, -1, 62,
+ -1, -1, -1, -1, -1, -1, -1, 33, 60, 94,
+ 62, 37, -1, -1, -1, 41, 42, 43, 33, 45,
+ 94, 47, 37, -1, -1, -1, 41, 42, 43, 33,
+ 45, 94, 47, 37, 60, -1, 62, -1, 42, 43,
+ 33, 45, 94, 47, 37, 60, -1, 62, -1, 42,
+ 43, -1, 45, -1, 47, -1, 60, -1, 62, 276,
+ 277, 278, 279, 280, 281, 282, 283, 60, 94, 62,
+ 276, 277, 278, 279, 280, 281, 282, 283, -1, 94,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 94, -1, 276, 277, 278, 279, 280, 281, 282, 283,
+ -1, 94, -1, 276, 277, 278, 279, 280, 281, 282,
+ 283, 40, -1, -1, -1, -1, 45, -1, -1, -1,
+ -1, -1, -1, -1, -1, 276, 277, 278, 279, 280,
+ 281, 282, 283, -1, -1, -1, 276, 277, 278, 279,
+ 280, 281, 282, 283, -1, -1, -1, 276, 277, 278,
+ 279, 280, 281, 282, 283, 40, -1, -1, -1, -1,
+ 45, -1, -1, -1, -1, -1, -1, -1, -1, 276,
+ 277, 278, 279, 280, 281, 282, 283, 40, -1, -1,
+ -1, -1, 45, -1, -1, -1, -1, -1, -1, -1,
+ -1, 276, 277, 278, 279, 280, 281, 282, 283, -1,
+ -1, -1, 276, 277, 278, 279, 280, 281, 282, 283,
+ -1, -1, -1, 276, 277, 278, 279, 280, 281, 282,
+ 283, -1, -1, -1, 276, 277, 278, 279, 280, 281,
+ 282, 283, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 276, 277, 278, 279, 280, 281, 282, 283, -1, -1,
+ -1, 276, 277, 278, 279, 280, 281, 282, 283, -1,
+ -1, -1, 276, 277, 278, 279, 280, 281, 282, 283,
+ -1, -1, -1, -1, 277, 278, 279, 280, 281, 282,
+ 283, 33, -1, -1, -1, 37, -1, -1, -1, -1,
+ 42, 43, -1, 45, -1, 47, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, 60, -1,
+ 62, -1, -1, -1, -1, -1, -1, 256, -1, -1,
+ 259, 260, 261, 262, 263, 264, 265, 266, 267, 268,
+ 269, 270, 271, 272, 273, 274, 275, -1, -1, -1,
+ -1, -1, 94, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, 259, 260, 261, 262, 263, 264,
+ 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
+ 275, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 263, 264, 265, 266, 267, 268, 269, 270, 271, 272,
+ 273, 274, 275, 19, 20, -1, -1, -1, -1, -1,
+ 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
+ 36, 37, -1, -1, -1, -1, -1, 43, 44, 45,
+ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, 93, -1, -1,
+ 96, 97, -1, 99, -1, -1, 102, 103, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, 113, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, 278, 279, 280, 281,
+ 282, 283,
+};
+#define YYFINAL 21
+#ifndef YYDEBUG
+#define YYDEBUG 0
+#endif
+#define YYMAXTOKEN 284
+#define YYUNDFTOKEN 292
+#define YYTRANSLATE(a) ((a) > YYMAXTOKEN ? YYUNDFTOKEN : (a))
+#if YYDEBUG
+static const char *const yyname[] = {
+
+"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+"'!'",0,0,0,"'%'",0,0,"'('","')'","'*'","'+'","','","'-'",0,"'/'",0,0,0,0,0,0,0,
+0,0,0,0,0,"'<'","'='","'>'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+0,0,0,0,0,"'^'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+0,0,0,0,0,0,0,0,0,0,"EOS","BAD","HELP","HEX","DECIMAL","QUIT","ABS","BIN","FIB",
+"GCD","KRON","LCM","LUCNUM","NEXTPRIME","POWM","ROOT","SQRT","NUMBER",
+"VARIABLE","LOR","LAND","EQ","NE","LE","GE","LSHIFT","RSHIFT","UMINUS",0,0,0,0,
+0,0,0,"illegal-symbol",
+};
+static const char *const yyrule[] = {
+"$accept : top",
+"top : statement",
+"top : statements statement",
+"statements : statement EOS",
+"statements : statements statement EOS",
+"statements : error EOS",
+"statement :",
+"statement : e",
+"statement : VARIABLE '=' e",
+"statement : HELP",
+"statement : HEX",
+"statement : DECIMAL",
+"statement : QUIT",
+"e : '(' e ')'",
+"e : e '+' e",
+"e : e '-' e",
+"e : e '*' e",
+"e : e '/' e",
+"e : e '%' e",
+"e : e '^' e",
+"e : e LSHIFT e",
+"e : e RSHIFT e",
+"e : e '!'",
+"e : '-' e",
+"e : e '<' e",
+"e : e LE e",
+"e : e EQ e",
+"e : e NE e",
+"e : e GE e",
+"e : e '>' e",
+"e : e LAND e",
+"e : e LOR e",
+"e : ABS '(' e ')'",
+"e : BIN '(' e ',' e ')'",
+"e : FIB '(' e ')'",
+"e : GCD '(' gcdlist ')'",
+"e : KRON '(' e ',' e ')'",
+"e : LCM '(' lcmlist ')'",
+"e : LUCNUM '(' e ')'",
+"e : NEXTPRIME '(' e ')'",
+"e : POWM '(' e ',' e ',' e ')'",
+"e : ROOT '(' e ',' e ')'",
+"e : SQRT '(' e ')'",
+"e : VARIABLE",
+"e : NUMBER",
+"gcdlist : e",
+"gcdlist : gcdlist ',' e",
+"lcmlist : e",
+"lcmlist : lcmlist ',' e",
+
+};
+#endif
+
+int yydebug;
+int yynerrs;
+
+int yyerrflag;
+int yychar;
+YYSTYPE yyval;
+YYSTYPE yylval;
+
+/* define the initial stack-sizes */
+#ifdef YYSTACKSIZE
+#undef YYMAXDEPTH
+#define YYMAXDEPTH YYSTACKSIZE
+#else
+#ifdef YYMAXDEPTH
+#define YYSTACKSIZE YYMAXDEPTH
+#else
+#define YYSTACKSIZE 10000
+#define YYMAXDEPTH 10000
+#endif
+#endif
+
+#define YYINITSTACKSIZE 200
+
+typedef struct {
+ unsigned stacksize;
+ YYINT *s_base;
+ YYINT *s_mark;
+ YYINT *s_last;
+ YYSTYPE *l_base;
+ YYSTYPE *l_mark;
+} YYSTACKDATA;
+/* variables for the parser stack */
+static YYSTACKDATA yystack;
+#line 265 "../../../gmp/demos/calc/calc.y"
+
+yyerror (char *s)
+{
+ fprintf (stderr, "%s\n", s);
+}
+
+int calc_option_readline = -1;
+
+int
+main (int argc, char *argv[])
+{
+ int i;
+
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], "--readline") == 0)
+ calc_option_readline = 1;
+ else if (strcmp (argv[i], "--noreadline") == 0)
+ calc_option_readline = 0;
+ else if (strcmp (argv[i], "--help") == 0)
+ {
+ printf ("Usage: calc [--option]...\n");
+ printf (" --readline use readline\n");
+ printf (" --noreadline don't use readline\n");
+ printf (" --help this message\n");
+ printf ("Readline is only available when compiled in,\n");
+ printf ("and in that case it's the default on a tty.\n");
+ exit (0);
+ }
+ else
+ {
+ fprintf (stderr, "Unrecognised option: %s\n", argv[i]);
+ exit (1);
+ }
+ }
+
+#if WITH_READLINE
+ calc_init_readline ();
+#else
+ if (calc_option_readline == 1)
+ {
+ fprintf (stderr, "Readline support not available\n");
+ exit (1);
+ }
+#endif
+
+ for (i = 0; i < numberof (variable); i++)
+ mpz_init (variable[i]);
+
+ for (i = 0; i < numberof (stack); i++)
+ mpz_init (stack[i]);
+
+ return yyparse ();
+}
+#line 710 "calc.c"
+
+#if YYDEBUG
+#include <stdio.h> /* needed for printf */
+#endif
+
+#include <stdlib.h> /* needed for malloc, etc */
+#include <string.h> /* needed for memset */
+
+/* allocate initial stack or double stack size, up to YYMAXDEPTH */
+static int yygrowstack(YYSTACKDATA *data)
+{
+ int i;
+ unsigned newsize;
+ YYINT *newss;
+ YYSTYPE *newvs;
+
+ if ((newsize = data->stacksize) == 0)
+ newsize = YYINITSTACKSIZE;
+ else if (newsize >= YYMAXDEPTH)
+ return YYENOMEM;
+ else if ((newsize *= 2) > YYMAXDEPTH)
+ newsize = YYMAXDEPTH;
+
+ i = (int) (data->s_mark - data->s_base);
+ newss = (YYINT *)realloc(data->s_base, newsize * sizeof(*newss));
+ if (newss == 0)
+ return YYENOMEM;
+
+ data->s_base = newss;
+ data->s_mark = newss + i;
+
+ newvs = (YYSTYPE *)realloc(data->l_base, newsize * sizeof(*newvs));
+ if (newvs == 0)
+ return YYENOMEM;
+
+ data->l_base = newvs;
+ data->l_mark = newvs + i;
+
+ data->stacksize = newsize;
+ data->s_last = data->s_base + newsize - 1;
+ return 0;
+}
+
+#if YYPURE || defined(YY_NO_LEAKS)
+static void yyfreestack(YYSTACKDATA *data)
+{
+ free(data->s_base);
+ free(data->l_base);
+ memset(data, 0, sizeof(*data));
+}
+#else
+#define yyfreestack(data) /* nothing */
+#endif
+
+#define YYABORT goto yyabort
+#define YYREJECT goto yyabort
+#define YYACCEPT goto yyaccept
+#define YYERROR goto yyerrlab
+
+int
+YYPARSE_DECL()
+{
+ int yym, yyn, yystate;
+#if YYDEBUG
+ const char *yys;
+
+ if ((yys = getenv("YYDEBUG")) != 0)
+ {
+ yyn = *yys;
+ if (yyn >= '0' && yyn <= '9')
+ yydebug = yyn - '0';
+ }
+#endif
+
+ yym = 0;
+ yyn = 0;
+ yynerrs = 0;
+ yyerrflag = 0;
+ yychar = YYEMPTY;
+ yystate = 0;
+
+#if YYPURE
+ memset(&yystack, 0, sizeof(yystack));
+#endif
+
+ if (yystack.s_base == NULL && yygrowstack(&yystack) == YYENOMEM) goto yyoverflow;
+ yystack.s_mark = yystack.s_base;
+ yystack.l_mark = yystack.l_base;
+ yystate = 0;
+ *yystack.s_mark = 0;
+
+yyloop:
+ if ((yyn = yydefred[yystate]) != 0) goto yyreduce;
+ if (yychar < 0)
+ {
+ yychar = YYLEX;
+ if (yychar < 0) yychar = YYEOF;
+#if YYDEBUG
+ if (yydebug)
+ {
+ if ((yys = yyname[YYTRANSLATE(yychar)]) == NULL) yys = yyname[YYUNDFTOKEN];
+ printf("%sdebug: state %d, reading %d (%s)\n",
+ YYPREFIX, yystate, yychar, yys);
+ }
+#endif
+ }
+ if (((yyn = yysindex[yystate]) != 0) && (yyn += yychar) >= 0 &&
+ yyn <= YYTABLESIZE && yycheck[yyn] == (YYINT) yychar)
+ {
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: state %d, shifting to state %d\n",
+ YYPREFIX, yystate, yytable[yyn]);
+#endif
+ if (yystack.s_mark >= yystack.s_last && yygrowstack(&yystack) == YYENOMEM) goto yyoverflow;
+ yystate = yytable[yyn];
+ *++yystack.s_mark = yytable[yyn];
+ *++yystack.l_mark = yylval;
+ yychar = YYEMPTY;
+ if (yyerrflag > 0) --yyerrflag;
+ goto yyloop;
+ }
+ if (((yyn = yyrindex[yystate]) != 0) && (yyn += yychar) >= 0 &&
+ yyn <= YYTABLESIZE && yycheck[yyn] == (YYINT) yychar)
+ {
+ yyn = yytable[yyn];
+ goto yyreduce;
+ }
+ if (yyerrflag != 0) goto yyinrecovery;
+
+ YYERROR_CALL("syntax error");
+
+ goto yyerrlab; /* redundant goto avoids 'unused label' warning */
+yyerrlab:
+ ++yynerrs;
+
+yyinrecovery:
+ if (yyerrflag < 3)
+ {
+ yyerrflag = 3;
+ for (;;)
+ {
+ if (((yyn = yysindex[*yystack.s_mark]) != 0) && (yyn += YYERRCODE) >= 0 &&
+ yyn <= YYTABLESIZE && yycheck[yyn] == (YYINT) YYERRCODE)
+ {
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: state %d, error recovery shifting\
+ to state %d\n", YYPREFIX, *yystack.s_mark, yytable[yyn]);
+#endif
+ if (yystack.s_mark >= yystack.s_last && yygrowstack(&yystack) == YYENOMEM) goto yyoverflow;
+ yystate = yytable[yyn];
+ *++yystack.s_mark = yytable[yyn];
+ *++yystack.l_mark = yylval;
+ goto yyloop;
+ }
+ else
+ {
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: error recovery discarding state %d\n",
+ YYPREFIX, *yystack.s_mark);
+#endif
+ if (yystack.s_mark <= yystack.s_base) goto yyabort;
+ --yystack.s_mark;
+ --yystack.l_mark;
+ }
+ }
+ }
+ else
+ {
+ if (yychar == YYEOF) goto yyabort;
+#if YYDEBUG
+ if (yydebug)
+ {
+ if ((yys = yyname[YYTRANSLATE(yychar)]) == NULL) yys = yyname[YYUNDFTOKEN];
+ printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
+ YYPREFIX, yystate, yychar, yys);
+ }
+#endif
+ yychar = YYEMPTY;
+ goto yyloop;
+ }
+
+yyreduce:
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: state %d, reducing by rule %d (%s)\n",
+ YYPREFIX, yystate, yyn, yyrule[yyn]);
+#endif
+ yym = yylen[yyn];
+ if (yym > 0)
+ yyval = yystack.l_mark[1-yym];
+ else
+ memset(&yyval, 0, sizeof yyval);
+
+ switch (yyn)
+ {
+case 5:
+#line 173 "../../../gmp/demos/calc/calc.y"
+ { sp = stack[0]; yyerrok; }
+break;
+case 7:
+#line 177 "../../../gmp/demos/calc/calc.y"
+ {
+ mpz_out_str (stdout, obase, sp); putchar ('\n');
+ sp--;
+ CHECK_EMPTY ();
+ }
+break;
+case 8:
+#line 182 "../../../gmp/demos/calc/calc.y"
+ {
+ CHECK_VARIABLE (yystack.l_mark[-2].var);
+ mpz_swap (variable[yystack.l_mark[-2].var], sp);
+ sp--;
+ CHECK_EMPTY ();
+ }
+break;
+case 9:
+#line 188 "../../../gmp/demos/calc/calc.y"
+ { calc_help (); }
+break;
+case 10:
+#line 189 "../../../gmp/demos/calc/calc.y"
+ { ibase = 16; obase = -16; }
+break;
+case 11:
+#line 190 "../../../gmp/demos/calc/calc.y"
+ { ibase = 0; obase = 10; }
+break;
+case 12:
+#line 191 "../../../gmp/demos/calc/calc.y"
+ { exit (0); }
+break;
+case 14:
+#line 198 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_add (sp, sp, sp+1); }
+break;
+case 15:
+#line 199 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_sub (sp, sp, sp+1); }
+break;
+case 16:
+#line 200 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_mul (sp, sp, sp+1); }
+break;
+case 17:
+#line 201 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_fdiv_q (sp, sp, sp+1); }
+break;
+case 18:
+#line 202 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_fdiv_r (sp, sp, sp+1); }
+break;
+case 19:
+#line 203 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Exponent", sp);
+ sp--; mpz_pow_ui (sp, sp, mpz_get_ui (sp+1)); }
+break;
+case 20:
+#line 205 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Shift count", sp);
+ sp--; mpz_mul_2exp (sp, sp, mpz_get_ui (sp+1)); }
+break;
+case 21:
+#line 207 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Shift count", sp);
+ sp--; mpz_fdiv_q_2exp (sp, sp, mpz_get_ui (sp+1)); }
+break;
+case 22:
+#line 209 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Factorial", sp);
+ mpz_fac_ui (sp, mpz_get_ui (sp)); }
+break;
+case 23:
+#line 211 "../../../gmp/demos/calc/calc.y"
+ { mpz_neg (sp, sp); }
+break;
+case 24:
+#line 213 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) < 0); }
+break;
+case 25:
+#line 214 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) <= 0); }
+break;
+case 26:
+#line 215 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) == 0); }
+break;
+case 27:
+#line 216 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) != 0); }
+break;
+case 28:
+#line 217 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) >= 0); }
+break;
+case 29:
+#line 218 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) > 0); }
+break;
+case 30:
+#line 220 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_sgn (sp) && mpz_sgn (sp+1)); }
+break;
+case 31:
+#line 221 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_ui (sp, mpz_sgn (sp) || mpz_sgn (sp+1)); }
+break;
+case 32:
+#line 223 "../../../gmp/demos/calc/calc.y"
+ { mpz_abs (sp, sp); }
+break;
+case 33:
+#line 224 "../../../gmp/demos/calc/calc.y"
+ { sp--; CHECK_UI ("Binomial base", sp+1);
+ mpz_bin_ui (sp, sp, mpz_get_ui (sp+1)); }
+break;
+case 34:
+#line 226 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Fibonacci", sp);
+ mpz_fib_ui (sp, mpz_get_ui (sp)); }
+break;
+case 36:
+#line 229 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_set_si (sp,
+ mpz_kronecker (sp, sp+1)); }
+break;
+case 38:
+#line 232 "../../../gmp/demos/calc/calc.y"
+ { CHECK_UI ("Lucas number", sp);
+ mpz_lucnum_ui (sp, mpz_get_ui (sp)); }
+break;
+case 39:
+#line 234 "../../../gmp/demos/calc/calc.y"
+ { mpz_nextprime (sp, sp); }
+break;
+case 40:
+#line 235 "../../../gmp/demos/calc/calc.y"
+ { sp -= 2; mpz_powm (sp, sp, sp+1, sp+2); }
+break;
+case 41:
+#line 236 "../../../gmp/demos/calc/calc.y"
+ { sp--; CHECK_UI ("Nth-root", sp+1);
+ mpz_root (sp, sp, mpz_get_ui (sp+1)); }
+break;
+case 42:
+#line 238 "../../../gmp/demos/calc/calc.y"
+ { mpz_sqrt (sp, sp); }
+break;
+case 43:
+#line 240 "../../../gmp/demos/calc/calc.y"
+ {
+ sp++;
+ CHECK_OVERFLOW ();
+ CHECK_VARIABLE (yystack.l_mark[0].var);
+ mpz_set (sp, variable[yystack.l_mark[0].var]);
+ }
+break;
+case 44:
+#line 246 "../../../gmp/demos/calc/calc.y"
+ {
+ sp++;
+ CHECK_OVERFLOW ();
+ if (mpz_set_str (sp, yystack.l_mark[0].str, ibase) != 0)
+ {
+ fprintf (stderr, "Invalid number: %s\n", yystack.l_mark[0].str);
+ YYERROR;
+ }
+ }
+break;
+case 46:
+#line 258 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_gcd (sp, sp, sp+1); }
+break;
+case 48:
+#line 262 "../../../gmp/demos/calc/calc.y"
+ { sp--; mpz_lcm (sp, sp, sp+1); }
+break;
+#line 1092 "calc.c"
+ }
+ yystack.s_mark -= yym;
+ yystate = *yystack.s_mark;
+ yystack.l_mark -= yym;
+ yym = yylhs[yyn];
+ if (yystate == 0 && yym == 0)
+ {
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: after reduction, shifting from state 0 to\
+ state %d\n", YYPREFIX, YYFINAL);
+#endif
+ yystate = YYFINAL;
+ *++yystack.s_mark = YYFINAL;
+ *++yystack.l_mark = yyval;
+ if (yychar < 0)
+ {
+ yychar = YYLEX;
+ if (yychar < 0) yychar = YYEOF;
+#if YYDEBUG
+ if (yydebug)
+ {
+ if ((yys = yyname[YYTRANSLATE(yychar)]) == NULL) yys = yyname[YYUNDFTOKEN];
+ printf("%sdebug: state %d, reading %d (%s)\n",
+ YYPREFIX, YYFINAL, yychar, yys);
+ }
+#endif
+ }
+ if (yychar == YYEOF) goto yyaccept;
+ goto yyloop;
+ }
+ if (((yyn = yygindex[yym]) != 0) && (yyn += yystate) >= 0 &&
+ yyn <= YYTABLESIZE && yycheck[yyn] == (YYINT) yystate)
+ yystate = yytable[yyn];
+ else
+ yystate = yydgoto[yym];
+#if YYDEBUG
+ if (yydebug)
+ printf("%sdebug: after reduction, shifting from state %d \
+to state %d\n", YYPREFIX, *yystack.s_mark, yystate);
+#endif
+ if (yystack.s_mark >= yystack.s_last && yygrowstack(&yystack) == YYENOMEM) goto yyoverflow;
+ *++yystack.s_mark = (YYINT) yystate;
+ *++yystack.l_mark = yyval;
+ goto yyloop;
+
+yyoverflow:
+ YYERROR_CALL("yacc stack overflow");
+
+yyabort:
+ yyfreestack(&yystack);
+ return (1);
+
+yyaccept:
+ yyfreestack(&yystack);
+ return (0);
+}
diff --git a/third_party/gmp/demos/calc/calc.h b/third_party/gmp/demos/calc/calc.h
new file mode 100644
index 0000000..8c48e2a
--- /dev/null
+++ b/third_party/gmp/demos/calc/calc.h
@@ -0,0 +1,40 @@
+#define EOS 257
+#define BAD 258
+#define HELP 259
+#define HEX 260
+#define DECIMAL 261
+#define QUIT 262
+#define ABS 263
+#define BIN 264
+#define FIB 265
+#define GCD 266
+#define KRON 267
+#define LCM 268
+#define LUCNUM 269
+#define NEXTPRIME 270
+#define POWM 271
+#define ROOT 272
+#define SQRT 273
+#define NUMBER 274
+#define VARIABLE 275
+#define LOR 276
+#define LAND 277
+#define EQ 278
+#define NE 279
+#define LE 280
+#define GE 281
+#define LSHIFT 282
+#define RSHIFT 283
+#define UMINUS 284
+#ifdef YYSTYPE
+#undef YYSTYPE_IS_DECLARED
+#define YYSTYPE_IS_DECLARED 1
+#endif
+#ifndef YYSTYPE_IS_DECLARED
+#define YYSTYPE_IS_DECLARED 1
+typedef union {
+ char *str;
+ int var;
+} YYSTYPE;
+#endif /* !YYSTYPE_IS_DECLARED */
+extern YYSTYPE yylval;
diff --git a/third_party/gmp/demos/calc/calc.y b/third_party/gmp/demos/calc/calc.y
new file mode 100644
index 0000000..0fa1206
--- /dev/null
+++ b/third_party/gmp/demos/calc/calc.y
@@ -0,0 +1,318 @@
+%{
+/* A simple integer desk calculator using yacc and gmp.
+
+Copyright 2000-2002 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+
+/* This is a simple program, meant only to show one way to use GMP for this
+ sort of thing. There's few features, and error checking is minimal.
+ Standard input is read, calc_help() below shows the inputs accepted.
+
+ Expressions are evaluated as they're read. If user defined functions
+ were wanted it'd be necessary to build a parse tree like pexpr.c does, or
+ a list of operations for a stack based evaluator. That would also make
+ it possible to detect and optimize evaluations "mod m" like pexpr.c does.
+
+ A stack is used for intermediate values in the expression evaluation,
+ separate from the yacc parser stack. This is simple, makes error
+ recovery easy, minimizes the junk around mpz calls in the rules, and
+ saves initializing or clearing "mpz_t"s during a calculation. A
+ disadvantage though is that variables must be copied to the stack to be
+ worked on. A more sophisticated calculator or language system might be
+ able to avoid that when executing a compiled or semi-compiled form.
+
+ Avoiding repeated initializing and clearing of "mpz_t"s is important. In
+ this program the time spent parsing is obviously much greater than any
+ possible saving from this, but a proper calculator or language should
+ take some trouble over it. Don't be surprised if an init/clear takes 3
+ or more times as long as a 10 limb addition, depending on the system (see
+ the mpz_init_realloc_clear example in tune/README). */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "gmp.h"
+#define NO_CALC_H /* because it conflicts with normal calc.c stuff */
+#include "calc-common.h"
+
+
+#define numberof(x) (sizeof (x) / sizeof ((x)[0]))
+
+
+void
+calc_help (void)
+{
+ printf ("Examples:\n");
+ printf (" 2+3*4 expressions are evaluated\n");
+ printf (" x=5^6 variables a to z can be set and used\n");
+ printf ("Operators:\n");
+ printf (" + - * arithmetic\n");
+ printf (" / %% division and remainder (rounding towards negative infinity)\n");
+ printf (" ^ exponentiation\n");
+ printf (" ! factorial\n");
+ printf (" << >> left and right shifts\n");
+ printf (" <= >= > \\ comparisons, giving 1 if true, 0 if false\n");
+ printf (" == != < /\n");
+ printf (" && || logical and/or, giving 1 if true, 0 if false\n");
+ printf ("Functions:\n");
+ printf (" abs(n) absolute value\n");
+ printf (" bin(n,m) binomial coefficient\n");
+ printf (" fib(n) fibonacci number\n");
+ printf (" gcd(a,b,..) greatest common divisor\n");
+ printf (" kron(a,b) kronecker symbol\n");
+ printf (" lcm(a,b,..) least common multiple\n");
+ printf (" lucnum(n) lucas number\n");
+ printf (" nextprime(n) next prime after n\n");
+ printf (" powm(b,e,m) modulo powering, b^e%%m\n");
+ printf (" root(n,r) r-th root\n");
+ printf (" sqrt(n) square root\n");
+ printf ("Other:\n");
+ printf (" hex \\ set hex or decimal for input and output\n");
+ printf (" decimal / (\"0x\" can be used for hex too)\n");
+ printf (" quit exit program (EOF works too)\n");
+ printf (" ; statements are separated with a ; or newline\n");
+ printf (" \\ continue expressions with \\ before newline\n");
+ printf (" # xxx comments are # though to newline\n");
+ printf ("Hex numbers must be entered in upper case, to distinguish them from the\n");
+ printf ("variables a to f (like in bc).\n");
+}
+
+
+int ibase = 0;
+int obase = 10;
+
+
+/* The stack is a fixed size, which means there's a limit on the nesting
+ allowed in expressions. A more sophisticated program could let it grow
+ dynamically. */
+
+mpz_t stack[100];
+mpz_ptr sp = stack[0];
+
+#define CHECK_OVERFLOW() \
+ if (sp >= stack[numberof(stack)]) /* FIXME */ \
+ { \
+ fprintf (stderr, \
+ "Value stack overflow, too much nesting in expression\n"); \
+ YYERROR; \
+ }
+
+#define CHECK_EMPTY() \
+ if (sp != stack[0]) \
+ { \
+ fprintf (stderr, "Oops, expected the value stack to be empty\n"); \
+ sp = stack[0]; \
+ }
+
+
+mpz_t variable[26];
+
+#define CHECK_VARIABLE(var) \
+ if ((var) < 0 || (var) >= numberof (variable)) \
+ { \
+ fprintf (stderr, "Oops, bad variable somehow: %d\n", var); \
+ YYERROR; \
+ }
+
+
+#define CHECK_UI(name,z) \
+ if (! mpz_fits_ulong_p (z)) \
+ { \
+ fprintf (stderr, "%s too big\n", name); \
+ YYERROR; \
+ }
+
+%}
+
+%union {
+ char *str;
+ int var;
+}
+
+%token EOS BAD
+%token HELP HEX DECIMAL QUIT
+%token ABS BIN FIB GCD KRON LCM LUCNUM NEXTPRIME POWM ROOT SQRT
+%token <str> NUMBER
+%token <var> VARIABLE
+
+/* operators, increasing precedence */
+%left LOR
+%left LAND
+%nonassoc '<' '>' EQ NE LE GE
+%left LSHIFT RSHIFT
+%left '+' '-'
+%left '*' '/' '%'
+%nonassoc UMINUS
+%right '^'
+%nonassoc '!'
+
+%%
+
+top:
+ statement
+ | statements statement;
+
+statements:
+ statement EOS
+ | statements statement EOS
+ | error EOS { sp = stack[0]; yyerrok; };
+
+statement:
+ /* empty */
+ | e {
+ mpz_out_str (stdout, obase, sp); putchar ('\n');
+ sp--;
+ CHECK_EMPTY ();
+ }
+ | VARIABLE '=' e {
+ CHECK_VARIABLE ($1);
+ mpz_swap (variable[$1], sp);
+ sp--;
+ CHECK_EMPTY ();
+ }
+ | HELP { calc_help (); }
+ | HEX { ibase = 16; obase = -16; }
+ | DECIMAL { ibase = 0; obase = 10; }
+ | QUIT { exit (0); };
+
+/* "e" leaves it's value on the top of the mpz stack. A rule like "e '+' e"
+ will have done a reduction for the first "e" first and the second "e"
+ second, so the code receives the values in that order on the stack. */
+e:
+ '(' e ')' /* value on stack */
+ | e '+' e { sp--; mpz_add (sp, sp, sp+1); }
+ | e '-' e { sp--; mpz_sub (sp, sp, sp+1); }
+ | e '*' e { sp--; mpz_mul (sp, sp, sp+1); }
+ | e '/' e { sp--; mpz_fdiv_q (sp, sp, sp+1); }
+ | e '%' e { sp--; mpz_fdiv_r (sp, sp, sp+1); }
+ | e '^' e { CHECK_UI ("Exponent", sp);
+ sp--; mpz_pow_ui (sp, sp, mpz_get_ui (sp+1)); }
+ | e LSHIFT e { CHECK_UI ("Shift count", sp);
+ sp--; mpz_mul_2exp (sp, sp, mpz_get_ui (sp+1)); }
+ | e RSHIFT e { CHECK_UI ("Shift count", sp);
+ sp--; mpz_fdiv_q_2exp (sp, sp, mpz_get_ui (sp+1)); }
+ | e '!' { CHECK_UI ("Factorial", sp);
+ mpz_fac_ui (sp, mpz_get_ui (sp)); }
+ | '-' e %prec UMINUS { mpz_neg (sp, sp); }
+
+ | e '<' e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) < 0); }
+ | e LE e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) <= 0); }
+ | e EQ e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) == 0); }
+ | e NE e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) != 0); }
+ | e GE e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) >= 0); }
+ | e '>' e { sp--; mpz_set_ui (sp, mpz_cmp (sp, sp+1) > 0); }
+
+ | e LAND e { sp--; mpz_set_ui (sp, mpz_sgn (sp) && mpz_sgn (sp+1)); }
+ | e LOR e { sp--; mpz_set_ui (sp, mpz_sgn (sp) || mpz_sgn (sp+1)); }
+
+ | ABS '(' e ')' { mpz_abs (sp, sp); }
+ | BIN '(' e ',' e ')' { sp--; CHECK_UI ("Binomial base", sp+1);
+ mpz_bin_ui (sp, sp, mpz_get_ui (sp+1)); }
+ | FIB '(' e ')' { CHECK_UI ("Fibonacci", sp);
+ mpz_fib_ui (sp, mpz_get_ui (sp)); }
+ | GCD '(' gcdlist ')' /* value on stack */
+ | KRON '(' e ',' e ')' { sp--; mpz_set_si (sp,
+ mpz_kronecker (sp, sp+1)); }
+ | LCM '(' lcmlist ')' /* value on stack */
+ | LUCNUM '(' e ')' { CHECK_UI ("Lucas number", sp);
+ mpz_lucnum_ui (sp, mpz_get_ui (sp)); }
+ | NEXTPRIME '(' e ')' { mpz_nextprime (sp, sp); }
+ | POWM '(' e ',' e ',' e ')' { sp -= 2; mpz_powm (sp, sp, sp+1, sp+2); }
+ | ROOT '(' e ',' e ')' { sp--; CHECK_UI ("Nth-root", sp+1);
+ mpz_root (sp, sp, mpz_get_ui (sp+1)); }
+ | SQRT '(' e ')' { mpz_sqrt (sp, sp); }
+
+ | VARIABLE {
+ sp++;
+ CHECK_OVERFLOW ();
+ CHECK_VARIABLE ($1);
+ mpz_set (sp, variable[$1]);
+ }
+ | NUMBER {
+ sp++;
+ CHECK_OVERFLOW ();
+ if (mpz_set_str (sp, $1, ibase) != 0)
+ {
+ fprintf (stderr, "Invalid number: %s\n", $1);
+ YYERROR;
+ }
+ };
+
+gcdlist:
+ e /* value on stack */
+ | gcdlist ',' e { sp--; mpz_gcd (sp, sp, sp+1); };
+
+lcmlist:
+ e /* value on stack */
+ | lcmlist ',' e { sp--; mpz_lcm (sp, sp, sp+1); };
+
+%%
+
+yyerror (char *s)
+{
+ fprintf (stderr, "%s\n", s);
+}
+
+int calc_option_readline = -1;
+
+int
+main (int argc, char *argv[])
+{
+ int i;
+
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], "--readline") == 0)
+ calc_option_readline = 1;
+ else if (strcmp (argv[i], "--noreadline") == 0)
+ calc_option_readline = 0;
+ else if (strcmp (argv[i], "--help") == 0)
+ {
+ printf ("Usage: calc [--option]...\n");
+ printf (" --readline use readline\n");
+ printf (" --noreadline don't use readline\n");
+ printf (" --help this message\n");
+ printf ("Readline is only available when compiled in,\n");
+ printf ("and in that case it's the default on a tty.\n");
+ exit (0);
+ }
+ else
+ {
+ fprintf (stderr, "Unrecognised option: %s\n", argv[i]);
+ exit (1);
+ }
+ }
+
+#if WITH_READLINE
+ calc_init_readline ();
+#else
+ if (calc_option_readline == 1)
+ {
+ fprintf (stderr, "Readline support not available\n");
+ exit (1);
+ }
+#endif
+
+ for (i = 0; i < numberof (variable); i++)
+ mpz_init (variable[i]);
+
+ for (i = 0; i < numberof (stack); i++)
+ mpz_init (stack[i]);
+
+ return yyparse ();
+}
diff --git a/third_party/gmp/demos/calc/calclex.c b/third_party/gmp/demos/calc/calclex.c
new file mode 100644
index 0000000..7884001
--- /dev/null
+++ b/third_party/gmp/demos/calc/calclex.c
@@ -0,0 +1,1933 @@
+
+#line 3 "calclex.c"
+
+#define YY_INT_ALIGNED short int
+
+/* A lexical scanner generated by flex */
+
+#define FLEX_SCANNER
+#define YY_FLEX_MAJOR_VERSION 2
+#define YY_FLEX_MINOR_VERSION 5
+#define YY_FLEX_SUBMINOR_VERSION 37
+#if YY_FLEX_SUBMINOR_VERSION > 0
+#define FLEX_BETA
+#endif
+
+/* First, we deal with platform-specific or compiler-specific issues. */
+
+#if defined(__FreeBSD__)
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS
+#endif
+#include <sys/cdefs.h>
+#include <stdint.h>
+#else
+#define __dead2
+#endif
+
+/* begin standard C headers. */
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+
+/* end standard C headers. */
+
+/* flex integer type definitions */
+
+#ifndef FLEXINT_H
+#define FLEXINT_H
+
+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
+
+#if defined(__FreeBSD__) || \
+ (defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L)
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types.
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
+#include <inttypes.h>
+typedef int8_t flex_int8_t;
+typedef uint8_t flex_uint8_t;
+typedef int16_t flex_int16_t;
+typedef uint16_t flex_uint16_t;
+typedef int32_t flex_int32_t;
+typedef uint32_t flex_uint32_t;
+#else
+typedef signed char flex_int8_t;
+typedef short int flex_int16_t;
+typedef int flex_int32_t;
+typedef unsigned char flex_uint8_t;
+typedef unsigned short int flex_uint16_t;
+typedef unsigned int flex_uint32_t;
+
+/* Limits of integral types. */
+#ifndef INT8_MIN
+#define INT8_MIN (-128)
+#endif
+#ifndef INT16_MIN
+#define INT16_MIN (-32767-1)
+#endif
+#ifndef INT32_MIN
+#define INT32_MIN (-2147483647-1)
+#endif
+#ifndef INT8_MAX
+#define INT8_MAX (127)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX (32767)
+#endif
+#ifndef INT32_MAX
+#define INT32_MAX (2147483647)
+#endif
+#ifndef UINT8_MAX
+#define UINT8_MAX (255U)
+#endif
+#ifndef UINT16_MAX
+#define UINT16_MAX (65535U)
+#endif
+#ifndef UINT32_MAX
+#define UINT32_MAX (4294967295U)
+#endif
+
+#endif /* ! C99 */
+
+#endif /* ! FLEXINT_H */
+
+#ifdef __cplusplus
+
+/* The "const" storage-class-modifier is valid. */
+#define YY_USE_CONST
+
+#else /* ! __cplusplus */
+
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
+
+#define YY_USE_CONST
+
+#endif /* defined (__STDC__) */
+#endif /* ! __cplusplus */
+
+#ifdef YY_USE_CONST
+#define yyconst const
+#else
+#define yyconst
+#endif
+
+/* Returned upon end-of-file. */
+#define YY_NULL 0
+
+/* Promotes a possibly negative, possibly signed char to an unsigned
+ * integer for use as an array index. If the signed char is negative,
+ * we want to instead treat it as an 8-bit unsigned char, hence the
+ * double cast.
+ */
+#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
+
+/* Enter a start condition. This macro really ought to take a parameter,
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+#define BEGIN (yy_start) = 1 + 2 *
+
+/* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state. The YYSTATE alias is for lex
+ * compatibility.
+ */
+#define YY_START (((yy_start) - 1) / 2)
+#define YYSTATE YY_START
+
+/* Action number for EOF rule of a given start state. */
+#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+/* Special action meaning "start processing a new file". */
+#define YY_NEW_FILE yyrestart(yyin )
+
+#define YY_END_OF_BUFFER_CHAR 0
+
+/* Size of default input buffer. */
+#ifndef YY_BUF_SIZE
+#define YY_BUF_SIZE 16384
+#endif
+
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
+#define YY_TYPEDEF_YY_BUFFER_STATE
+typedef struct yy_buffer_state *YY_BUFFER_STATE;
+#endif
+
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef size_t yy_size_t;
+#endif
+
+extern yy_size_t yyleng;
+
+extern FILE *yyin, *yyout;
+
+#define EOB_ACT_CONTINUE_SCAN 0
+#define EOB_ACT_END_OF_FILE 1
+#define EOB_ACT_LAST_MATCH 2
+
+ #define YY_LESS_LINENO(n)
+
+/* Return all but the first "n" matched characters back to the input stream. */
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up yytext again */ \
+ } \
+ while ( 0 )
+
+#define unput(c) yyunput( c, (yytext_ptr) )
+
+#ifndef YY_STRUCT_YY_BUFFER_STATE
+#define YY_STRUCT_YY_BUFFER_STATE
+struct yy_buffer_state
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ yy_size_t yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
+
+ int yy_bs_lineno; /**< The line count. */
+ int yy_bs_column; /**< The column count. */
+
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
+
+#define YY_BUFFER_NEW 0
+#define YY_BUFFER_NORMAL 1
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via yyrestart()), so that the user can continue scanning by
+ * just pointing yyin at a new input file.
+ */
+#define YY_BUFFER_EOF_PENDING 2
+
+ };
+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+/* Stack of input buffers. */
+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+/* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
+ *
+ * Returns the top of the stack, or NULL.
+ */
+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
+ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
+ : NULL)
+#define yy_current_buffer YY_CURRENT_BUFFER
+
+/* Same as previous macro, but useful when we know that the buffer stack is not
+ * NULL or when we need an lvalue. For internal use only.
+ */
+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+/* yy_hold_char holds the character lost when yytext is formed. */
+static char yy_hold_char;
+static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
+yy_size_t yyleng;
+
+/* Points to current character in buffer. */
+static char *yy_c_buf_p = (char *) 0;
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
+
+/* Flag which is used to allow yywrap()'s to do buffer switches
+ * instead of setting up a fresh yyin. A bit of a hack ...
+ */
+static int yy_did_buffer_switch_on_eof;
+
+void yyrestart (FILE *input_file );
+void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
+YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
+void yy_delete_buffer (YY_BUFFER_STATE b );
+void yy_flush_buffer (YY_BUFFER_STATE b );
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
+void yypop_buffer_state (void );
+
+static void yyensure_buffer_stack (void );
+static void yy_load_buffer_state (void );
+static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
+
+#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
+
+YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
+YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
+
+void *yyalloc (yy_size_t );
+void *yyrealloc (void *,yy_size_t );
+void yyfree (void * );
+
+#define yy_new_buffer yy_create_buffer
+
+#define yy_set_interactive(is_interactive) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
+
+#define yy_set_bol(at_bol) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
+
+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
+
+/* Begin user sect3 */
+
+typedef unsigned char YY_CHAR;
+
+FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
+
+typedef int yy_state_type;
+
+extern int yylineno;
+
+int yylineno = 1;
+
+extern char *yytext;
+#define yytext_ptr yytext
+
+static yy_state_type yy_get_previous_state (void );
+static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
+static int yy_get_next_buffer (void );
+static void yy_fatal_error (yyconst char msg[] ) __dead2;
+
+/* Done after the current pattern has been matched and before the
+ * corresponding action - sets up yytext.
+ */
+#define YY_DO_BEFORE_ACTION \
+ (yytext_ptr) = yy_bp; \
+ yyleng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
+
+#define YY_NUM_RULES 19
+#define YY_END_OF_BUFFER 20
+/* This struct is not used in this scanner,
+ but its presence is necessary. */
+struct yy_trans_info
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
+static yyconst flex_int16_t yy_accept[39] =
+ { 0,
+ 0, 0, 20, 18, 1, 2, 7, 6, 7, 18,
+ 16, 16, 2, 7, 7, 7, 16, 17, 18, 18,
+ 11, 6, 5, 6, 14, 16, 0, 12, 8, 10,
+ 9, 13, 16, 17, 3, 15, 4, 0
+ } ;
+
+static yyconst flex_int32_t yy_ec[256] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
+ 1, 2, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 2, 4, 1, 5, 1, 6, 7, 1, 6,
+ 6, 6, 6, 6, 6, 1, 6, 8, 9, 9,
+ 9, 9, 9, 9, 9, 9, 9, 1, 10, 11,
+ 12, 13, 1, 1, 14, 14, 14, 14, 14, 14,
+ 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+ 15, 15, 15, 15, 15, 15, 15, 16, 15, 15,
+ 1, 17, 1, 6, 1, 1, 15, 15, 15, 15,
+
+ 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+ 15, 15, 15, 15, 15, 15, 15, 15, 15, 16,
+ 15, 15, 1, 18, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1
+ } ;
+
+static yyconst flex_int32_t yy_meta[19] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 2, 2, 1,
+ 1, 1, 1, 2, 3, 2, 1, 1
+ } ;
+
+static yyconst flex_int16_t yy_base[43] =
+ { 0,
+ 0, 0, 39, 49, 49, 49, 26, 16, 49, 30,
+ 20, 19, 49, 9, 22, 10, 9, 0, 29, 13,
+ 49, 23, 49, 24, 49, 0, 0, 49, 49, 49,
+ 49, 49, 13, 0, 49, 49, 49, 49, 41, 28,
+ 43, 45
+ } ;
+
+static yyconst flex_int16_t yy_def[43] =
+ { 0,
+ 38, 1, 38, 38, 38, 38, 38, 39, 38, 38,
+ 40, 40, 38, 38, 38, 38, 41, 42, 38, 38,
+ 38, 39, 38, 39, 38, 12, 12, 38, 38, 38,
+ 38, 38, 41, 42, 38, 38, 38, 0, 38, 38,
+ 38, 38
+ } ;
+
+static yyconst flex_int16_t yy_nxt[68] =
+ { 0,
+ 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
+ 14, 15, 16, 17, 18, 18, 19, 20, 23, 28,
+ 29, 31, 32, 34, 34, 23, 37, 34, 34, 26,
+ 36, 35, 24, 30, 38, 27, 25, 21, 38, 24,
+ 24, 22, 22, 22, 33, 33, 34, 34, 3, 38,
+ 38, 38, 38, 38, 38, 38, 38, 38, 38, 38,
+ 38, 38, 38, 38, 38, 38, 38
+ } ;
+
+static yyconst flex_int16_t yy_chk[68] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 8, 14,
+ 14, 16, 16, 17, 17, 22, 24, 33, 33, 40,
+ 20, 19, 8, 15, 12, 11, 10, 7, 3, 22,
+ 24, 39, 39, 39, 41, 41, 42, 42, 38, 38,
+ 38, 38, 38, 38, 38, 38, 38, 38, 38, 38,
+ 38, 38, 38, 38, 38, 38, 38
+ } ;
+
+static yy_state_type yy_last_accepting_state;
+static char *yy_last_accepting_cpos;
+
+extern int yy_flex_debug;
+int yy_flex_debug = 0;
+
+/* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+#define REJECT reject_used_but_not_detected
+#define yymore() yymore_used_but_not_detected
+#define YY_MORE_ADJ 0
+#define YY_RESTORE_YY_MORE_OFFSET
+char *yytext;
+#line 1 "../../../gmp/demos/calc/calclex.l"
+/* Lexical analyzer for calc program.
+
+Copyright 2000-2002 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+#line 20 "../../../gmp/demos/calc/calclex.l"
+#include <string.h>
+#include "calc-common.h"
+
+
+#if WITH_READLINE
+/* Let GNU flex use readline. See the calcread.c redefined input() for a
+ way that might work for a standard lex too. */
+#define YY_INPUT(buf,result,max_size) \
+ result = calc_input (buf, max_size);
+#endif
+
+
+/* Non-zero when reading the second or subsequent line of an expression,
+ used to give a different prompt when using readline. */
+int calc_more_input = 0;
+
+
+const struct calc_keywords_t calc_keywords[] = {
+ { "abs", ABS },
+ { "bin", BIN },
+ { "decimal", DECIMAL },
+ { "fib", FIB },
+ { "hex", HEX },
+ { "help", HELP },
+ { "gcd", GCD },
+ { "kron", KRON },
+ { "lcm", LCM },
+ { "lucnum", LUCNUM },
+ { "nextprime", NEXTPRIME },
+ { "powm", POWM },
+ { "quit", QUIT },
+ { "root", ROOT },
+ { "sqrt", SQRT },
+ { NULL }
+};
+#line 539 "calclex.c"
+
+#define INITIAL 0
+
+#ifndef YY_NO_UNISTD_H
+/* Special case for "unistd.h", since it is non-ANSI. We include it way
+ * down here because we want the user's section 1 to have been scanned first.
+ * The user has a chance to override it with an option.
+ */
+#include <unistd.h>
+#endif
+
+#ifndef YY_EXTRA_TYPE
+#define YY_EXTRA_TYPE void *
+#endif
+
+static int yy_init_globals (void );
+
+/* Accessor methods to globals.
+ These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined );
+
+FILE *yyget_in (void );
+
+void yyset_in (FILE * in_str );
+
+FILE *yyget_out (void );
+
+void yyset_out (FILE * out_str );
+
+yy_size_t yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number );
+
+/* Macros after this point can all be overridden by user definitions in
+ * section 1.
+ */
+
+#ifndef YY_SKIP_YYWRAP
+#ifdef __cplusplus
+extern "C" int yywrap (void );
+#else
+extern int yywrap (void );
+#endif
+#endif
+
+#ifndef YY_NO_UNPUT
+ static void yyunput (int c,char *buf_ptr );
+#endif
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char *,yyconst char *,int );
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * );
+#endif
+
+#ifndef YY_NO_INPUT
+
+#ifdef __cplusplus
+static int yyinput (void );
+#else
+static int input (void );
+#endif
+
+#endif
+
+/* Amount of stuff to slurp up with each read. */
+#ifndef YY_READ_BUF_SIZE
+#define YY_READ_BUF_SIZE 8192
+#endif
+
+/* Copy whatever the last rule matched to the standard output. */
+#ifndef ECHO
+/* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+ */
+#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
+#endif
+
+/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
+ * is returned in "result".
+ */
+#ifndef YY_INPUT
+#define YY_INPUT(buf,result,max_size) \
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+ int c = '*'; \
+ size_t n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+ if ( c == '\n' ) \
+ buf[n++] = (char) c; \
+ if ( c == EOF && ferror( yyin ) ) \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+ else \
+ { \
+ errno=0; \
+ while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(yyin); \
+ } \
+ }\
+\
+
+#endif
+
+/* No semi-colon after return; correct usage is to write "yyterminate();" -
+ * we don't want an extra ';' after the "return" because that will cause
+ * some compilers to complain about unreachable statements.
+ */
+#ifndef yyterminate
+#define yyterminate() return YY_NULL
+#endif
+
+/* Number of entries by which start-condition stack grows. */
+#ifndef YY_START_STACK_INCR
+#define YY_START_STACK_INCR 25
+#endif
+
+/* Report a fatal error. */
+#ifndef YY_FATAL_ERROR
+#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+#endif
+
+/* end tables serialization structures and prototypes */
+
+/* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+#ifndef YY_DECL
+#define YY_DECL_IS_OURS 1
+
+extern int yylex (void);
+
+#define YY_DECL int yylex (void)
+#endif /* !YY_DECL */
+
+/* Code executed at the beginning of each rule, after yytext and yyleng
+ * have been set up.
+ */
+#ifndef YY_USER_ACTION
+#define YY_USER_ACTION
+#endif
+
+/* Code executed at the end of each rule. */
+#ifndef YY_BREAK
+#define YY_BREAK break;
+#endif
+
+#define YY_RULE_SETUP \
+ YY_USER_ACTION
+
+/** The main scanner function which does all the work.
+ */
+YY_DECL
+{
+ yy_state_type yy_current_state;
+ char *yy_cp, *yy_bp;
+ int yy_act;
+
+#line 57 "../../../gmp/demos/calc/calclex.l"
+
+
+#line 726 "calclex.c"
+
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
+
+#ifdef YY_USER_INIT
+ YY_USER_INIT;
+#endif
+
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
+
+ if ( ! yyin )
+ yyin = stdin;
+
+ if ( ! yyout )
+ yyout = stdout;
+
+ if ( ! YY_CURRENT_BUFFER ) {
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_load_buffer_state( );
+ }
+
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
+
+ /* Support of yytext. */
+ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+ yy_current_state = (yy_start);
+yy_match:
+ do
+ {
+ YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 39 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ ++yy_cp;
+ }
+ while ( yy_base[yy_current_state] != 49 );
+
+yy_find_action:
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+do_action: /* This label is used only to access EOF actions. */
+
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+ *yy_cp = (yy_hold_char);
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
+
+case 1:
+YY_RULE_SETUP
+#line 59 "../../../gmp/demos/calc/calclex.l"
+{ /* white space is skipped */ }
+ YY_BREAK
+case 2:
+/* rule 2 can match eol */
+YY_RULE_SETUP
+#line 61 "../../../gmp/demos/calc/calclex.l"
+{ /* semicolon or newline separates statements */
+ calc_more_input = 0;
+ return EOS; }
+ YY_BREAK
+case 3:
+/* rule 3 can match eol */
+YY_RULE_SETUP
+#line 64 "../../../gmp/demos/calc/calclex.l"
+{ /* escaped newlines are skipped */ }
+ YY_BREAK
+case 4:
+/* rule 4 can match eol */
+YY_RULE_SETUP
+#line 67 "../../../gmp/demos/calc/calclex.l"
+{
+ /* comment through to escaped newline is skipped */ }
+ YY_BREAK
+case 5:
+/* rule 5 can match eol */
+YY_RULE_SETUP
+#line 69 "../../../gmp/demos/calc/calclex.l"
+{ /* comment through to newline is a separator */
+ calc_more_input = 0;
+ return EOS; }
+ YY_BREAK
+case 6:
+YY_RULE_SETUP
+#line 72 "../../../gmp/demos/calc/calclex.l"
+{ /* comment through to EOF skipped */ }
+ YY_BREAK
+case 7:
+YY_RULE_SETUP
+#line 75 "../../../gmp/demos/calc/calclex.l"
+{ return yytext[0]; }
+ YY_BREAK
+case 8:
+YY_RULE_SETUP
+#line 76 "../../../gmp/demos/calc/calclex.l"
+{ return LE; }
+ YY_BREAK
+case 9:
+YY_RULE_SETUP
+#line 77 "../../../gmp/demos/calc/calclex.l"
+{ return GE; }
+ YY_BREAK
+case 10:
+YY_RULE_SETUP
+#line 78 "../../../gmp/demos/calc/calclex.l"
+{ return EQ; }
+ YY_BREAK
+case 11:
+YY_RULE_SETUP
+#line 79 "../../../gmp/demos/calc/calclex.l"
+{ return NE; }
+ YY_BREAK
+case 12:
+YY_RULE_SETUP
+#line 80 "../../../gmp/demos/calc/calclex.l"
+{ return LSHIFT; }
+ YY_BREAK
+case 13:
+YY_RULE_SETUP
+#line 81 "../../../gmp/demos/calc/calclex.l"
+{ return RSHIFT; }
+ YY_BREAK
+case 14:
+YY_RULE_SETUP
+#line 82 "../../../gmp/demos/calc/calclex.l"
+{ return LAND; }
+ YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 83 "../../../gmp/demos/calc/calclex.l"
+{ return LOR; }
+ YY_BREAK
+case 16:
+YY_RULE_SETUP
+#line 85 "../../../gmp/demos/calc/calclex.l"
+{
+ yylval.str = yytext;
+ return NUMBER; }
+ YY_BREAK
+case 17:
+YY_RULE_SETUP
+#line 89 "../../../gmp/demos/calc/calclex.l"
+{
+ int i;
+
+ for (i = 0; calc_keywords[i].name != NULL; i++)
+ if (strcmp (yytext, calc_keywords[i].name) == 0)
+ return calc_keywords[i].value;
+
+ if (yytext[0] >= 'a' && yytext[0] <= 'z' && yytext[1] == '\0')
+ {
+ yylval.var = yytext[0] - 'a';
+ return VARIABLE;
+ }
+
+ return BAD;
+}
+ YY_BREAK
+case 18:
+YY_RULE_SETUP
+#line 105 "../../../gmp/demos/calc/calclex.l"
+{ return BAD; }
+ YY_BREAK
+case 19:
+YY_RULE_SETUP
+#line 107 "../../../gmp/demos/calc/calclex.l"
+ECHO;
+ YY_BREAK
+#line 929 "calclex.c"
+case YY_STATE_EOF(INITIAL):
+ yyterminate();
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed yyin at a new source and called
+ * yylex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( yywrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * yytext, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+} /* end of yylex */
+
+/* yy_get_next_buffer - try to read in a new buffer
+ *
+ * Returns a code representing an action:
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
+ */
+static int yy_get_next_buffer (void)
+{
+ char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ char *source = (yytext_ptr);
+ int number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ yy_size_t num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ yy_size_t new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ yyrestart(yyin );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
+}
+
+/* yy_get_previous_state - get the state just before the EOB char was reached */
+
+ static yy_state_type yy_get_previous_state (void)
+{
+ yy_state_type yy_current_state;
+ char *yy_cp;
+
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 39 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ }
+
+ return yy_current_state;
+}
+
+/* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ * next_state = yy_try_NUL_trans( current_state );
+ */
+ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
+{
+ int yy_is_jam;
+ char *yy_cp = (yy_c_buf_p);
+
+ YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 39 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_is_jam = (yy_current_state == 38);
+
+ return yy_is_jam ? 0 : yy_current_state;
+}
+
+#ifndef YY_NO_UNPUT
+ static void yyunput (int c, char * yy_bp )
+{
+ char *yy_cp;
+
+ yy_cp = (yy_c_buf_p);
+
+ /* undo effects of setting up yytext */
+ *yy_cp = (yy_hold_char);
+
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ { /* need to shift things up to make room */
+ /* +2 for EOB chars. */
+ yy_size_t number_to_move = (yy_n_chars) + 2;
+ char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
+ char *source =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
+
+ while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ *--dest = *--source;
+
+ yy_cp += (int) (dest - source);
+ yy_bp += (int) (dest - source);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
+
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ YY_FATAL_ERROR( "flex scanner push-back overflow" );
+ }
+
+ *--yy_cp = (char) c;
+
+ (yytext_ptr) = yy_bp;
+ (yy_hold_char) = *yy_cp;
+ (yy_c_buf_p) = yy_cp;
+}
+#endif /* ifndef YY_NO_UNPUT */
+
+#ifndef YY_NO_INPUT
+#ifdef __cplusplus
+ static int yyinput (void)
+#else
+ static int input (void)
+#endif
+
+{
+ int c;
+
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ yyrestart(yyin );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( yywrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+#ifdef __cplusplus
+ return yyinput();
+#else
+ return input();
+#endif
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
+
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve yytext */
+ (yy_hold_char) = *++(yy_c_buf_p);
+
+ return c;
+}
+#endif /* ifndef YY_NO_INPUT */
+
+/** Immediately switch to a different input stream.
+ * @param input_file A readable stream.
+ *
+ * @note This function does not reset the start condition to @c INITIAL .
+ */
+ void yyrestart (FILE * input_file )
+{
+
+ if ( ! YY_CURRENT_BUFFER ){
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_init_buffer(YY_CURRENT_BUFFER,input_file );
+ yy_load_buffer_state( );
+}
+
+/** Switch to a different input buffer.
+ * @param new_buffer The new input buffer.
+ *
+ */
+ void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
+{
+
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * yypop_buffer_state();
+ * yypush_buffer_state(new_buffer);
+ */
+ yyensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ yy_load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (yywrap()) processing, but the only time this flag
+ * is looked at is after yywrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+static void yy_load_buffer_state (void)
+{
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
+}
+
+/** Allocate and initialize an input buffer state.
+ * @param file A readable stream.
+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ *
+ * @return the allocated buffer state.
+ */
+ YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
+{
+ YY_BUFFER_STATE b;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_buf_size = size;
+
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_is_our_buffer = 1;
+
+ yy_init_buffer(b,file );
+
+ return b;
+}
+
+/** Destroy the buffer.
+ * @param b a buffer created with yy_create_buffer()
+ *
+ */
+ void yy_delete_buffer (YY_BUFFER_STATE b )
+{
+
+ if ( ! b )
+ return;
+
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+ if ( b->yy_is_our_buffer )
+ yyfree((void *) b->yy_ch_buf );
+
+ yyfree((void *) b );
+}
+
+/* Initializes or reinitializes a buffer.
+ * This function is sometimes called more than once on the same buffer,
+ * such as during a yyrestart() or at EOF.
+ */
+ static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
+
+{
+ int oerrno = errno;
+
+ yy_flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
+
+ /* If b is the current buffer, then yy_init_buffer was _probably_
+ * called from yyrestart() or through yy_get_next_buffer.
+ * In that case, we don't want to reset the lineno or column.
+ */
+ if (b != YY_CURRENT_BUFFER){
+ b->yy_bs_lineno = 1;
+ b->yy_bs_column = 0;
+ }
+
+ b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+
+ errno = oerrno;
+}
+
+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ *
+ */
+ void yy_flush_buffer (YY_BUFFER_STATE b )
+{
+ if ( ! b )
+ return;
+
+ b->yy_n_chars = 0;
+
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+
+ b->yy_buf_pos = &b->yy_ch_buf[0];
+
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ if ( b == YY_CURRENT_BUFFER )
+ yy_load_buffer_state( );
+}
+
+/** Pushes the new state onto the stack. The new state becomes
+ * the current state. This function will allocate the stack
+ * if necessary.
+ * @param new_buffer The new state.
+ *
+ */
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
+{
+ if (new_buffer == NULL)
+ return;
+
+ yyensure_buffer_stack();
+
+ /* This block is copied from yy_switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+ /* copied from yy_switch_to_buffer. */
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+/** Removes and deletes the top of the stack, if present.
+ * The next element becomes the new top.
+ *
+ */
+void yypop_buffer_state (void)
+{
+ if (!YY_CURRENT_BUFFER)
+ return;
+
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
+
+ if (YY_CURRENT_BUFFER) {
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
+}
+
+/* Allocates the stack if it does not exist.
+ * Guarantees space for at least one push.
+ */
+static void yyensure_buffer_stack (void)
+{
+ yy_size_t num_to_alloc;
+
+ if (!(yy_buffer_stack)) {
+
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
+ */
+ num_to_alloc = 1;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ int grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
+}
+
+/** Setup the input buffer state to scan directly from a user-specified character buffer.
+ * @param base the character buffer
+ * @param size the size in bytes of the character buffer
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
+{
+ YY_BUFFER_STATE b;
+
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ yy_switch_to_buffer(b );
+
+ return b;
+}
+
+/** Setup the input buffer state to scan a string. The next call to yylex() will
+ * scan from a @e copy of @a str.
+ * @param yystr a NUL-terminated string to scan
+ *
+ * @return the newly allocated buffer state object.
+ * @note If you want to scan bytes that may contain NUL values, then use
+ * yy_scan_bytes() instead.
+ */
+YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
+{
+
+ return yy_scan_bytes(yystr,strlen(yystr) );
+}
+
+/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
+ * scan from a @e copy of @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
+{
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ yy_size_t i;
+
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) yyalloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
+
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
+
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+ b = yy_scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
+
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
+
+ return b;
+}
+
+#ifndef YY_EXIT_FAILURE
+#define YY_EXIT_FAILURE 2
+#endif
+
+static void yy_fatal_error (yyconst char* msg )
+{
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
+}
+
+/* Redefine yyless() so it works in section 3 code. */
+
+#undef yyless
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ yytext[yyleng] = (yy_hold_char); \
+ (yy_c_buf_p) = yytext + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ yyleng = yyless_macro_arg; \
+ } \
+ while ( 0 )
+
+/* Accessor methods (get/set functions) to struct members. */
+
+/** Get the current line number.
+ *
+ */
+int yyget_lineno (void)
+{
+
+ return yylineno;
+}
+
+/** Get the input stream.
+ *
+ */
+FILE *yyget_in (void)
+{
+ return yyin;
+}
+
+/** Get the output stream.
+ *
+ */
+FILE *yyget_out (void)
+{
+ return yyout;
+}
+
+/** Get the length of the current token.
+ *
+ */
+yy_size_t yyget_leng (void)
+{
+ return yyleng;
+}
+
+/** Get the current token.
+ *
+ */
+
+char *yyget_text (void)
+{
+ return yytext;
+}
+
+/** Set the current line number.
+ * @param line_number
+ *
+ */
+void yyset_lineno (int line_number )
+{
+
+ yylineno = line_number;
+}
+
+/** Set the input stream. This does not discard the current
+ * input buffer.
+ * @param in_str A readable stream.
+ *
+ * @see yy_switch_to_buffer
+ */
+void yyset_in (FILE * in_str )
+{
+ yyin = in_str ;
+}
+
+void yyset_out (FILE * out_str )
+{
+ yyout = out_str ;
+}
+
+int yyget_debug (void)
+{
+ return yy_flex_debug;
+}
+
+void yyset_debug (int bdebug )
+{
+ yy_flex_debug = bdebug ;
+}
+
+static int yy_init_globals (void)
+{
+ /* Initialization is the same as for the non-reentrant scanner.
+ * This function is called from yylex_destroy(), so don't allocate here.
+ */
+
+ (yy_buffer_stack) = 0;
+ (yy_buffer_stack_top) = 0;
+ (yy_buffer_stack_max) = 0;
+ (yy_c_buf_p) = (char *) 0;
+ (yy_init) = 0;
+ (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+ yyin = stdin;
+ yyout = stdout;
+#else
+ yyin = (FILE *) 0;
+ yyout = (FILE *) 0;
+#endif
+
+ /* For future reference: Set errno on error, since we are called by
+ * yylex_init()
+ */
+ return 0;
+}
+
+/* yylex_destroy is for both reentrant and non-reentrant scanners. */
+int yylex_destroy (void)
+{
+
+ /* Pop the buffer stack, destroying each element. */
+ while(YY_CURRENT_BUFFER){
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ yypop_buffer_state();
+ }
+
+ /* Destroy the stack itself. */
+ yyfree((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
+
+ /* Reset the globals. This is important in a non-reentrant scanner so the next time
+ * yylex() is called, initialization will occur. */
+ yy_init_globals( );
+
+ return 0;
+}
+
+/*
+ * Internal utility routines.
+ */
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
+{
+ int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
+}
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * s )
+{
+ int n;
+ for ( n = 0; s[n]; ++n )
+ ;
+
+ return n;
+}
+#endif
+
+void *yyalloc (yy_size_t size )
+{
+ return (void *) malloc( size );
+}
+
+void *yyrealloc (void * ptr, yy_size_t size )
+{
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
+}
+
+void yyfree (void * ptr )
+{
+ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
+}
+
+#define YYTABLES_NAME "yytables"
+
+#line 107 "../../../gmp/demos/calc/calclex.l"
+
+
+
+int
+yywrap ()
+{
+ return 1;
+}
+
diff --git a/third_party/gmp/demos/calc/calclex.l b/third_party/gmp/demos/calc/calclex.l
new file mode 100644
index 0000000..44df848
--- /dev/null
+++ b/third_party/gmp/demos/calc/calclex.l
@@ -0,0 +1,113 @@
+/* Lexical analyzer for calc program.
+
+Copyright 2000-2002 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+%{
+#include <string.h>
+#include "calc-common.h"
+
+
+#if WITH_READLINE
+/* Let GNU flex use readline. See the calcread.c redefined input() for a
+ way that might work for a standard lex too. */
+#define YY_INPUT(buf,result,max_size) \
+ result = calc_input (buf, max_size);
+#endif
+
+
+/* Non-zero when reading the second or subsequent line of an expression,
+ used to give a different prompt when using readline. */
+int calc_more_input = 0;
+
+
+const struct calc_keywords_t calc_keywords[] = {
+ { "abs", ABS },
+ { "bin", BIN },
+ { "decimal", DECIMAL },
+ { "fib", FIB },
+ { "hex", HEX },
+ { "help", HELP },
+ { "gcd", GCD },
+ { "kron", KRON },
+ { "lcm", LCM },
+ { "lucnum", LUCNUM },
+ { "nextprime", NEXTPRIME },
+ { "powm", POWM },
+ { "quit", QUIT },
+ { "root", ROOT },
+ { "sqrt", SQRT },
+ { NULL }
+};
+%}
+
+%%
+
+[ \t\f] { /* white space is skipped */ }
+
+[;\n] { /* semicolon or newline separates statements */
+ calc_more_input = 0;
+ return EOS; }
+\\\n { /* escaped newlines are skipped */ }
+
+
+#(([^\\\n]*)\\)+\n {
+ /* comment through to escaped newline is skipped */ }
+#[^\n]*\n { /* comment through to newline is a separator */
+ calc_more_input = 0;
+ return EOS; }
+#[^\n]* { /* comment through to EOF skipped */ }
+
+
+[-+*/%()<>^!=,] { return yytext[0]; }
+"<=" { return LE; }
+">=" { return GE; }
+"==" { return EQ; }
+"!=" { return NE; }
+"<<" { return LSHIFT; }
+">>" { return RSHIFT; }
+"&&" { return LAND; }
+"||" { return LOR; }
+
+(0[xX])?[0-9A-F]+ {
+ yylval.str = yytext;
+ return NUMBER; }
+
+[a-zA-Z][a-zA-Z0-9]* {
+ int i;
+
+ for (i = 0; calc_keywords[i].name != NULL; i++)
+ if (strcmp (yytext, calc_keywords[i].name) == 0)
+ return calc_keywords[i].value;
+
+ if (yytext[0] >= 'a' && yytext[0] <= 'z' && yytext[1] == '\0')
+ {
+ yylval.var = yytext[0] - 'a';
+ return VARIABLE;
+ }
+
+ return BAD;
+}
+
+. { return BAD; }
+
+%%
+
+int
+yywrap ()
+{
+ return 1;
+}
diff --git a/third_party/gmp/demos/calc/calcread.c b/third_party/gmp/demos/calc/calcread.c
new file mode 100644
index 0000000..4043368
--- /dev/null
+++ b/third_party/gmp/demos/calc/calcread.c
@@ -0,0 +1,146 @@
+/* Readline support for calc program.
+
+Copyright 2000, 2001 Free Software Foundation, Inc.
+
+This file is part of the GNU MP Library.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see https://www.gnu.org/licenses/. */
+
+#include "calc-common.h"
+
+#if WITH_READLINE
+#include <stdio.h> /* for FILE for old versions of readline/readline.h */
+#include <stdlib.h> /* for free */
+#include <string.h> /* for strdup */
+#include <unistd.h> /* for isatty */
+#include <readline/readline.h>
+#include <readline/history.h>
+
+#include "gmp.h"
+
+
+/* change this to "#define TRACE(x) x" for a few diagnostics */
+#define TRACE(x)
+
+
+#define MIN(x,y) ((x) < (y) ? (x) : (y))
+
+char *
+calc_completion_entry (const char *text, int state)
+{
+ static int index, len;
+ char *name;
+
+ if (!state)
+ {
+ index = 0;
+ len = strlen (text);
+ }
+ TRACE (printf ("calc_completion_entry %s %d, index=%d len=%d\n",
+ text, state, index, len));
+ while ((name = calc_keywords[index].name) != NULL)
+ {
+ index++;
+ if (memcmp (name, text, len) == 0)
+ return (strdup (name));
+ }
+ return NULL;
+}
+
+void
+calc_init_readline (void)
+{
+ /* By default use readline when the input is a tty. It's a bit contrary
+ to the GNU interface conventions to make the behaviour depend on where
+ the input is coming from, but this is pretty convenient. */
+ if (calc_option_readline == -1)
+ {
+ calc_option_readline = isatty (fileno (stdin));
+ TRACE (printf ("calc_option_readline %d\n", calc_option_readline));
+ }
+
+ if (calc_option_readline)
+ {
+ printf ("GNU MP demo calculator program, gmp version %s\n", gmp_version);
+ printf ("Type \"help\" for help.\n");
+ rl_readline_name = "gmp-calc";
+ rl_completion_entry_function = calc_completion_entry;
+ }
+}
+
+
+/* This function is supposed to return YY_NULL to indicate EOF, but that
+ constant is only in calclex.c and we don't want to clutter calclex.l with
+ this readline stuff, so instead just hard code 0 for YY_NULL. That's
+ it's defined value on unix anyway. */
+
+int
+calc_input (char *buf, size_t max_size)
+{
+ if (calc_option_readline)
+ {
+ static char *line = NULL;
+ static size_t line_size = 0;
+ static size_t upto = 0;
+ size_t copy_size;
+
+ if (upto >= line_size)
+ {
+ if (line != NULL)
+ free (line);
+
+ line = readline (calc_more_input ? "more> " : "> ");
+ calc_more_input = 1;
+ if (line == NULL)
+ return 0;
+ TRACE (printf ("readline: %s\n", line));
+
+ if (line[0] != '\0')
+ add_history (line);
+
+ line_size = strlen (line);
+ line[line_size] = '\n';
+ line_size++;
+ upto = 0;
+ }
+
+ copy_size = MIN (line_size-upto, max_size);
+ memcpy (buf, line+upto, copy_size);
+ upto += copy_size;
+ return copy_size;
+ }
+ else
+ {
+ /* not readline */
+ return fread (buf, 1, max_size, stdin);
+ }
+}
+
+
+/* This redefined input() might let a traditional lex use the readline
+ support here. Apparently POSIX doesn't specify whether an override like
+ this will work, so maybe it'll work or maybe it won't. This function is
+ also not particularly efficient, but don't worry about that, since flex
+ is the preferred parser. */
+
+int
+input (void)
+{
+ char c;
+ if (calc_input (&c, 1) != 1)
+ return EOF;
+ else
+ return (int) c;
+}
+
+#endif /* WITH_READLINE */