Add footprints and packages I forgot for the LED board
Change-Id: I795e9b9f1a507fc8abca2f57db0ee7e1fd06eeec
diff --git a/motors/packages/CAP_B.fp b/motors/packages/CAP_B.fp
new file mode 100644
index 0000000..ad65606
--- /dev/null
+++ b/motors/packages/CAP_B.fp
@@ -0,0 +1,15 @@
+# This is the footprint at
+# http://katalog.we-online.de/pbs/datasheet/865080442004.pdf
+# for a 4x5.5 capacitor (size B).
+Element[0x0 "" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[0 2.9mm 0 1.5mm 1.6mm 2000 1.85mm "1" "1" "square"]
+ Pad[0 -2.9mm 0 -1.5mm 1.6mm 2000 1.85mm "2" "2" "square"]
+
+ ElementLine[-3mm -3.3mm -1.2mm -3.3mm 1200]
+ ElementLine[3mm -3.3mm 1.2mm -3.3mm 1200]
+ ElementLine[-3.35mm 3.35mm -3.35mm -3.35mm 800]
+ ElementLine[3.35mm 3.35mm 3.35mm -3.35mm 800]
+ ElementLine[3.35mm 3.35mm 2.35mm 4.35mm 800]
+ ElementLine[-3.35mm 3.35mm -2.35mm 4.35mm 800]
+)
diff --git a/motors/packages/NRS4018.fp b/motors/packages/NRS4018.fp
new file mode 100644
index 0000000..aa9f0f7
--- /dev/null
+++ b/motors/packages/NRS4018.fp
@@ -0,0 +1,11 @@
+# This is the footprint recommended in
+# http://ds.yuden.co.jp/TYCOMPAS/ut/detail.do?productNo=NRS4018T330MDGJ&fileName=NRS4018T330MDGJ_SS&mode=specSheetDownload.
+Element["" "" "" "" 0 0 0 0 0 100 ""]
+(
+ Pad[-1.4mm 1.25mm -1.4mm -1.25mm 1.2mm 2000 1.4mm "1" "1" "square"]
+ Pad[1.4mm 1.25mm 1.4mm -1.25mm 1.2mm 2000 1.4mm "2" "2" "square"]
+ ElementLine[-2.25mm 2.25mm -2.25mm -2.25mm 800]
+ ElementLine[2.25mm -2.25mm -2.25mm -2.25mm 800]
+ ElementLine[2.25mm 2.25mm -2.25mm 2.25mm 800]
+ ElementLine[2.25mm 2.25mm 2.25mm -2.25mm 800]
+)
diff --git a/motors/packages/SOD123F.fp b/motors/packages/SOD123F.fp
new file mode 100644
index 0000000..b3642fa
--- /dev/null
+++ b/motors/packages/SOD123F.fp
@@ -0,0 +1,13 @@
+# This is the footprint at
+# https://www.fairchildsemi.com/datasheets/SS/SS13FL.pdf.
+# for a SOD123F diode.
+Element[0x0 "" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[-1.43mm 0.23mm -1.43mm -0.23mm 1.34mm 2000 1.56mm "1" "1" "square"]
+ Pad[1.43mm 0.23mm 1.43mm -0.23mm 1.34mm 2000 1.56mm "2" "2" "square"]
+
+ ElementLine[-1.65mm 1.15mm 1.65mm 1.15mm 800]
+ ElementLine[-1.65mm -1.15mm 1.65mm -1.15mm 800]
+ ElementLine[1.3mm -1.15mm 1.3mm -1.15mm 1100]
+ ElementLine[1.3mm 1.15mm 1.3mm 1.15mm 1100]
+)
diff --git a/motors/packages/SOD993.fp b/motors/packages/SOD993.fp
new file mode 100644
index 0000000..0729fe4
--- /dev/null
+++ b/motors/packages/SOD993.fp
@@ -0,0 +1,9 @@
+# This is the footprint at
+# https://assets.nexperia.com/documents/data-sheet/PMEG6010AESB.pdf.
+# for a SOD993 diode.
+# Aka DSN1006-2.
+Element[0x0 "" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[-0.325mm -0.125mm -0.325mm 0.125mm 0.35mm 2000 0.55mm "1" "1" "square"]
+ Pad[0.325mm -0.125mm 0.325mm 0.125mm 0.35mm 2000 0.55mm "2" "2" "square"]
+)
diff --git a/motors/packages/SOLDER_WIRE_x2.fp b/motors/packages/SOLDER_WIRE_x2.fp
new file mode 100644
index 0000000..530564e
--- /dev/null
+++ b/motors/packages/SOLDER_WIRE_x2.fp
@@ -0,0 +1,6 @@
+# This is a footprint for 2 wires soldered on.
+Element[0x0 "" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[-0.05in 0.075in -0.05in -0.075in 0.05in 2000 0.07in "1" "1" "square,nopaste"]
+ Pad[0.05in 0.075in 0.05in -0.075in 0.05in 2000 0.07in "2" "2" "square,nopaste"]
+)
diff --git a/motors/packages/SOLDER_WIRE_x5.fp b/motors/packages/SOLDER_WIRE_x5.fp
new file mode 100644
index 0000000..a3b341d
--- /dev/null
+++ b/motors/packages/SOLDER_WIRE_x5.fp
@@ -0,0 +1,9 @@
+# This is a footprint for 5 wires soldered on.
+Element[0x0 "" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[-0.2in 0.075in -0.2in -0.075in 0.05in 2000 0.07in "1" "1" "square,nopaste"]
+ Pad[-0.1in 0.075in -0.1in -0.075in 0.05in 2000 0.07in "2" "2" "square,nopaste"]
+ Pad[0.0in 0.075in 0.0in -0.075in 0.05in 2000 0.07in "3" "3" "square,nopaste"]
+ Pad[0.1in 0.075in 0.1in -0.075in 0.05in 2000 0.07in "4" "4" "square,nopaste"]
+ Pad[0.2in 0.075in 0.2in -0.075in 0.05in 2000 0.07in "5" "5" "square,nopaste"]
+)