diff --git a/src/base/dynamic_annotations.h b/src/base/dynamic_annotations.h
new file mode 100644
index 0000000..4669315
--- /dev/null
+++ b/src/base/dynamic_annotations.h
@@ -0,0 +1,627 @@
+/* Copyright (c) 2008, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other materials provided with the
+ * distribution.
+ *     * Neither the name of Google Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ---
+ * Author: Kostya Serebryany
+ */
+
+/* This file defines dynamic annotations for use with dynamic analysis
+   tool such as valgrind, PIN, etc.
+
+   Dynamic annotation is a source code annotation that affects
+   the generated code (that is, the annotation is not a comment).
+   Each such annotation is attached to a particular
+   instruction and/or to a particular object (address) in the program.
+
+   The annotations that should be used by users are macros in all upper-case
+   (e.g., ANNOTATE_NEW_MEMORY).
+
+   Actual implementation of these macros may differ depending on the
+   dynamic analysis tool being used.
+
+   See http://code.google.com/p/data-race-test/  for more information.
+
+   This file supports the following dynamic analysis tools:
+   - None (DYNAMIC_ANNOTATIONS_ENABLED is not defined or zero).
+      Macros are defined empty.
+   - ThreadSanitizer, Helgrind, DRD (DYNAMIC_ANNOTATIONS_ENABLED is 1).
+      Macros are defined as calls to non-inlinable empty functions
+      that are intercepted by Valgrind. */
+
+#ifndef BASE_DYNAMIC_ANNOTATIONS_H_
+#define BASE_DYNAMIC_ANNOTATIONS_H_
+
+#ifndef DYNAMIC_ANNOTATIONS_ENABLED
+# define DYNAMIC_ANNOTATIONS_ENABLED 0
+#endif
+
+#if DYNAMIC_ANNOTATIONS_ENABLED != 0
+
+  /* -------------------------------------------------------------
+     Annotations useful when implementing condition variables such as CondVar,
+     using conditional critical sections (Await/LockWhen) and when constructing
+     user-defined synchronization mechanisms.
+
+     The annotations ANNOTATE_HAPPENS_BEFORE() and ANNOTATE_HAPPENS_AFTER() can
+     be used to define happens-before arcs in user-defined synchronization
+     mechanisms:  the race detector will infer an arc from the former to the
+     latter when they share the same argument pointer.
+
+     Example 1 (reference counting):
+
+     void Unref() {
+       ANNOTATE_HAPPENS_BEFORE(&refcount_);
+       if (AtomicDecrementByOne(&refcount_) == 0) {
+         ANNOTATE_HAPPENS_AFTER(&refcount_);
+         delete this;
+       }
+     }
+
+     Example 2 (message queue):
+
+     void MyQueue::Put(Type *e) {
+       MutexLock lock(&mu_);
+       ANNOTATE_HAPPENS_BEFORE(e);
+       PutElementIntoMyQueue(e);
+     }
+
+     Type *MyQueue::Get() {
+       MutexLock lock(&mu_);
+       Type *e = GetElementFromMyQueue();
+       ANNOTATE_HAPPENS_AFTER(e);
+       return e;
+     }
+
+     Note: when possible, please use the existing reference counting and message
+     queue implementations instead of inventing new ones. */
+
+  /* Report that wait on the condition variable at address "cv" has succeeded
+     and the lock at address "lock" is held. */
+  #define ANNOTATE_CONDVAR_LOCK_WAIT(cv, lock) \
+    AnnotateCondVarWait(__FILE__, __LINE__, cv, lock)
+
+  /* Report that wait on the condition variable at "cv" has succeeded.  Variant
+     w/o lock. */
+  #define ANNOTATE_CONDVAR_WAIT(cv) \
+    AnnotateCondVarWait(__FILE__, __LINE__, cv, NULL)
+
+  /* Report that we are about to signal on the condition variable at address
+     "cv". */
+  #define ANNOTATE_CONDVAR_SIGNAL(cv) \
+    AnnotateCondVarSignal(__FILE__, __LINE__, cv)
+
+  /* Report that we are about to signal_all on the condition variable at "cv". */
+  #define ANNOTATE_CONDVAR_SIGNAL_ALL(cv) \
+    AnnotateCondVarSignalAll(__FILE__, __LINE__, cv)
+
+  /* Annotations for user-defined synchronization mechanisms. */
+  #define ANNOTATE_HAPPENS_BEFORE(obj) ANNOTATE_CONDVAR_SIGNAL(obj)
+  #define ANNOTATE_HAPPENS_AFTER(obj)  ANNOTATE_CONDVAR_WAIT(obj)
+
+  /* Report that the bytes in the range [pointer, pointer+size) are about
+     to be published safely. The race checker will create a happens-before
+     arc from the call ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size) to
+     subsequent accesses to this memory.
+     Note: this annotation may not work properly if the race detector uses
+     sampling, i.e. does not observe all memory accesses.
+     */
+  #define ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size) \
+    AnnotatePublishMemoryRange(__FILE__, __LINE__, pointer, size)
+
+  /* DEPRECATED. Don't use it. */
+  #define ANNOTATE_UNPUBLISH_MEMORY_RANGE(pointer, size) \
+    AnnotateUnpublishMemoryRange(__FILE__, __LINE__, pointer, size)
+
+  /* DEPRECATED. Don't use it. */
+  #define ANNOTATE_SWAP_MEMORY_RANGE(pointer, size)   \
+    do {                                              \
+      ANNOTATE_UNPUBLISH_MEMORY_RANGE(pointer, size); \
+      ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size);   \
+    } while (0)
+
+  /* Instruct the tool to create a happens-before arc between mu->Unlock() and
+     mu->Lock(). This annotation may slow down the race detector and hide real
+     races. Normally it is used only when it would be difficult to annotate each
+     of the mutex's critical sections individually using the annotations above.
+     This annotation makes sense only for hybrid race detectors. For pure
+     happens-before detectors this is a no-op. For more details see
+     http://code.google.com/p/data-race-test/wiki/PureHappensBeforeVsHybrid . */
+  #define ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(mu) \
+    AnnotateMutexIsUsedAsCondVar(__FILE__, __LINE__, mu)
+
+  /* Deprecated. Use ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX. */
+  #define ANNOTATE_MUTEX_IS_USED_AS_CONDVAR(mu) \
+    AnnotateMutexIsUsedAsCondVar(__FILE__, __LINE__, mu)
+
+  /* -------------------------------------------------------------
+     Annotations useful when defining memory allocators, or when memory that
+     was protected in one way starts to be protected in another. */
+
+  /* Report that a new memory at "address" of size "size" has been allocated.
+     This might be used when the memory has been retrieved from a free list and
+     is about to be reused, or when a the locking discipline for a variable
+     changes. */
+  #define ANNOTATE_NEW_MEMORY(address, size) \
+    AnnotateNewMemory(__FILE__, __LINE__, address, size)
+
+  /* -------------------------------------------------------------
+     Annotations useful when defining FIFO queues that transfer data between
+     threads. */
+
+  /* Report that the producer-consumer queue (such as ProducerConsumerQueue) at
+     address "pcq" has been created.  The ANNOTATE_PCQ_* annotations
+     should be used only for FIFO queues.  For non-FIFO queues use
+     ANNOTATE_HAPPENS_BEFORE (for put) and ANNOTATE_HAPPENS_AFTER (for get). */
+  #define ANNOTATE_PCQ_CREATE(pcq) \
+    AnnotatePCQCreate(__FILE__, __LINE__, pcq)
+
+  /* Report that the queue at address "pcq" is about to be destroyed. */
+  #define ANNOTATE_PCQ_DESTROY(pcq) \
+    AnnotatePCQDestroy(__FILE__, __LINE__, pcq)
+
+  /* Report that we are about to put an element into a FIFO queue at address
+     "pcq". */
+  #define ANNOTATE_PCQ_PUT(pcq) \
+    AnnotatePCQPut(__FILE__, __LINE__, pcq)
+
+  /* Report that we've just got an element from a FIFO queue at address "pcq". */
+  #define ANNOTATE_PCQ_GET(pcq) \
+    AnnotatePCQGet(__FILE__, __LINE__, pcq)
+
+  /* -------------------------------------------------------------
+     Annotations that suppress errors.  It is usually better to express the
+     program's synchronization using the other annotations, but these can
+     be used when all else fails. */
+
+  /* Report that we may have a benign race at "pointer", with size
+     "sizeof(*(pointer))". "pointer" must be a non-void* pointer.  Insert at the
+     point where "pointer" has been allocated, preferably close to the point
+     where the race happens.  See also ANNOTATE_BENIGN_RACE_STATIC. */
+  #define ANNOTATE_BENIGN_RACE(pointer, description) \
+    AnnotateBenignRaceSized(__FILE__, __LINE__, pointer, \
+                            sizeof(*(pointer)), description)
+
+  /* Same as ANNOTATE_BENIGN_RACE(address, description), but applies to
+     the memory range [address, address+size). */
+  #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) \
+    AnnotateBenignRaceSized(__FILE__, __LINE__, address, size, description)
+
+  /* Request the analysis tool to ignore all reads in the current thread
+     until ANNOTATE_IGNORE_READS_END is called.
+     Useful to ignore intentional racey reads, while still checking
+     other reads and all writes.
+     See also ANNOTATE_UNPROTECTED_READ. */
+  #define ANNOTATE_IGNORE_READS_BEGIN() \
+    AnnotateIgnoreReadsBegin(__FILE__, __LINE__)
+
+  /* Stop ignoring reads. */
+  #define ANNOTATE_IGNORE_READS_END() \
+    AnnotateIgnoreReadsEnd(__FILE__, __LINE__)
+
+  /* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore writes. */
+  #define ANNOTATE_IGNORE_WRITES_BEGIN() \
+    AnnotateIgnoreWritesBegin(__FILE__, __LINE__)
+
+  /* Stop ignoring writes. */
+  #define ANNOTATE_IGNORE_WRITES_END() \
+    AnnotateIgnoreWritesEnd(__FILE__, __LINE__)
+
+  /* Start ignoring all memory accesses (reads and writes). */
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() \
+    do {\
+      ANNOTATE_IGNORE_READS_BEGIN();\
+      ANNOTATE_IGNORE_WRITES_BEGIN();\
+    }while(0)\
+
+  /* Stop ignoring all memory accesses. */
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_END() \
+    do {\
+      ANNOTATE_IGNORE_WRITES_END();\
+      ANNOTATE_IGNORE_READS_END();\
+    }while(0)\
+
+  /* Enable (enable!=0) or disable (enable==0) race detection for all threads.
+     This annotation could be useful if you want to skip expensive race analysis
+     during some period of program execution, e.g. during initialization. */
+  #define ANNOTATE_ENABLE_RACE_DETECTION(enable) \
+    AnnotateEnableRaceDetection(__FILE__, __LINE__, enable)
+
+  /* -------------------------------------------------------------
+     Annotations useful for debugging. */
+
+  /* Request to trace every access to "address". */
+  #define ANNOTATE_TRACE_MEMORY(address) \
+    AnnotateTraceMemory(__FILE__, __LINE__, address)
+
+  /* Report the current thread name to a race detector. */
+  #define ANNOTATE_THREAD_NAME(name) \
+    AnnotateThreadName(__FILE__, __LINE__, name)
+
+  /* -------------------------------------------------------------
+     Annotations useful when implementing locks.  They are not
+     normally needed by modules that merely use locks.
+     The "lock" argument is a pointer to the lock object. */
+
+  /* Report that a lock has been created at address "lock". */
+  #define ANNOTATE_RWLOCK_CREATE(lock) \
+    AnnotateRWLockCreate(__FILE__, __LINE__, lock)
+
+  /* Report that the lock at address "lock" is about to be destroyed. */
+  #define ANNOTATE_RWLOCK_DESTROY(lock) \
+    AnnotateRWLockDestroy(__FILE__, __LINE__, lock)
+
+  /* Report that the lock at address "lock" has been acquired.
+     is_w=1 for writer lock, is_w=0 for reader lock. */
+  #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) \
+    AnnotateRWLockAcquired(__FILE__, __LINE__, lock, is_w)
+
+  /* Report that the lock at address "lock" is about to be released. */
+  #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) \
+    AnnotateRWLockReleased(__FILE__, __LINE__, lock, is_w)
+
+  /* -------------------------------------------------------------
+     Annotations useful when implementing barriers.  They are not
+     normally needed by modules that merely use barriers.
+     The "barrier" argument is a pointer to the barrier object. */
+
+  /* Report that the "barrier" has been initialized with initial "count".
+   If 'reinitialization_allowed' is true, initialization is allowed to happen
+   multiple times w/o calling barrier_destroy() */
+  #define ANNOTATE_BARRIER_INIT(barrier, count, reinitialization_allowed) \
+    AnnotateBarrierInit(__FILE__, __LINE__, barrier, count, \
+                        reinitialization_allowed)
+
+  /* Report that we are about to enter barrier_wait("barrier"). */
+  #define ANNOTATE_BARRIER_WAIT_BEFORE(barrier) \
+    AnnotateBarrierWaitBefore(__FILE__, __LINE__, barrier)
+
+  /* Report that we just exited barrier_wait("barrier"). */
+  #define ANNOTATE_BARRIER_WAIT_AFTER(barrier) \
+    AnnotateBarrierWaitAfter(__FILE__, __LINE__, barrier)
+
+  /* Report that the "barrier" has been destroyed. */
+  #define ANNOTATE_BARRIER_DESTROY(barrier) \
+    AnnotateBarrierDestroy(__FILE__, __LINE__, barrier)
+
+  /* -------------------------------------------------------------
+     Annotations useful for testing race detectors. */
+
+  /* Report that we expect a race on the variable at "address".
+     Use only in unit tests for a race detector. */
+  #define ANNOTATE_EXPECT_RACE(address, description) \
+    AnnotateExpectRace(__FILE__, __LINE__, address, description)
+
+  /* A no-op. Insert where you like to test the interceptors. */
+  #define ANNOTATE_NO_OP(arg) \
+    AnnotateNoOp(__FILE__, __LINE__, arg)
+
+  /* Force the race detector to flush its state. The actual effect depends on
+   * the implementation of the detector. */
+  #define ANNOTATE_FLUSH_STATE() \
+    AnnotateFlushState(__FILE__, __LINE__)
+
+
+#else  /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
+
+  #define ANNOTATE_RWLOCK_CREATE(lock) /* empty */
+  #define ANNOTATE_RWLOCK_DESTROY(lock) /* empty */
+  #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) /* empty */
+  #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) /* empty */
+  #define ANNOTATE_BARRIER_INIT(barrier, count, reinitialization_allowed) /* */
+  #define ANNOTATE_BARRIER_WAIT_BEFORE(barrier) /* empty */
+  #define ANNOTATE_BARRIER_WAIT_AFTER(barrier) /* empty */
+  #define ANNOTATE_BARRIER_DESTROY(barrier) /* empty */
+  #define ANNOTATE_CONDVAR_LOCK_WAIT(cv, lock) /* empty */
+  #define ANNOTATE_CONDVAR_WAIT(cv) /* empty */
+  #define ANNOTATE_CONDVAR_SIGNAL(cv) /* empty */
+  #define ANNOTATE_CONDVAR_SIGNAL_ALL(cv) /* empty */
+  #define ANNOTATE_HAPPENS_BEFORE(obj) /* empty */
+  #define ANNOTATE_HAPPENS_AFTER(obj) /* empty */
+  #define ANNOTATE_PUBLISH_MEMORY_RANGE(address, size) /* empty */
+  #define ANNOTATE_UNPUBLISH_MEMORY_RANGE(address, size)  /* empty */
+  #define ANNOTATE_SWAP_MEMORY_RANGE(address, size)  /* empty */
+  #define ANNOTATE_PCQ_CREATE(pcq) /* empty */
+  #define ANNOTATE_PCQ_DESTROY(pcq) /* empty */
+  #define ANNOTATE_PCQ_PUT(pcq) /* empty */
+  #define ANNOTATE_PCQ_GET(pcq) /* empty */
+  #define ANNOTATE_NEW_MEMORY(address, size) /* empty */
+  #define ANNOTATE_EXPECT_RACE(address, description) /* empty */
+  #define ANNOTATE_BENIGN_RACE(address, description) /* empty */
+  #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) /* empty */
+  #define ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(mu) /* empty */
+  #define ANNOTATE_MUTEX_IS_USED_AS_CONDVAR(mu) /* empty */
+  #define ANNOTATE_TRACE_MEMORY(arg) /* empty */
+  #define ANNOTATE_THREAD_NAME(name) /* empty */
+  #define ANNOTATE_IGNORE_READS_BEGIN() /* empty */
+  #define ANNOTATE_IGNORE_READS_END() /* empty */
+  #define ANNOTATE_IGNORE_WRITES_BEGIN() /* empty */
+  #define ANNOTATE_IGNORE_WRITES_END() /* empty */
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() /* empty */
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_END() /* empty */
+  #define ANNOTATE_ENABLE_RACE_DETECTION(enable) /* empty */
+  #define ANNOTATE_NO_OP(arg) /* empty */
+  #define ANNOTATE_FLUSH_STATE() /* empty */
+
+#endif  /* DYNAMIC_ANNOTATIONS_ENABLED */
+
+/* Macro definitions for GCC attributes that allow static thread safety
+   analysis to recognize and use some of the dynamic annotations as
+   escape hatches.
+   TODO(lcwu): remove the check for __SUPPORT_DYN_ANNOTATION__ once the
+   default crosstool/GCC supports these GCC attributes.  */
+
+#define ANNOTALYSIS_STATIC_INLINE
+#define ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY ;
+#define ANNOTALYSIS_IGNORE_READS_BEGIN
+#define ANNOTALYSIS_IGNORE_READS_END
+#define ANNOTALYSIS_IGNORE_WRITES_BEGIN
+#define ANNOTALYSIS_IGNORE_WRITES_END
+#define ANNOTALYSIS_UNPROTECTED_READ
+
+#if defined(__GNUC__) && (!defined(SWIG)) && (!defined(__clang__)) && \
+    defined(__SUPPORT_TS_ANNOTATION__) && defined(__SUPPORT_DYN_ANNOTATION__)
+
+#if DYNAMIC_ANNOTATIONS_ENABLED == 0
+#define ANNOTALYSIS_ONLY 1
+#undef ANNOTALYSIS_STATIC_INLINE
+#define ANNOTALYSIS_STATIC_INLINE static inline
+#undef ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+#define ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY { (void)file; (void)line; }
+#endif
+
+/* Only emit attributes when annotalysis is enabled. */
+#if defined(__SUPPORT_TS_ANNOTATION__) && defined(__SUPPORT_DYN_ANNOTATION__)
+#undef  ANNOTALYSIS_IGNORE_READS_BEGIN
+#define ANNOTALYSIS_IGNORE_READS_BEGIN  __attribute__ ((ignore_reads_begin))
+#undef  ANNOTALYSIS_IGNORE_READS_END
+#define ANNOTALYSIS_IGNORE_READS_END    __attribute__ ((ignore_reads_end))
+#undef  ANNOTALYSIS_IGNORE_WRITES_BEGIN
+#define ANNOTALYSIS_IGNORE_WRITES_BEGIN __attribute__ ((ignore_writes_begin))
+#undef  ANNOTALYSIS_IGNORE_WRITES_END
+#define ANNOTALYSIS_IGNORE_WRITES_END   __attribute__ ((ignore_writes_end))
+#undef  ANNOTALYSIS_UNPROTECTED_READ
+#define ANNOTALYSIS_UNPROTECTED_READ    __attribute__ ((unprotected_read))
+#endif
+
+#endif // defined(__GNUC__) && (!defined(SWIG)) && (!defined(__clang__))
+
+/* Use the macros above rather than using these functions directly. */
+#ifdef __cplusplus
+extern "C" {
+#endif
+void AnnotateRWLockCreate(const char *file, int line,
+                          const volatile void *lock);
+void AnnotateRWLockDestroy(const char *file, int line,
+                           const volatile void *lock);
+void AnnotateRWLockAcquired(const char *file, int line,
+                            const volatile void *lock, long is_w);
+void AnnotateRWLockReleased(const char *file, int line,
+                            const volatile void *lock, long is_w);
+void AnnotateBarrierInit(const char *file, int line,
+                         const volatile void *barrier, long count,
+                         long reinitialization_allowed);
+void AnnotateBarrierWaitBefore(const char *file, int line,
+                               const volatile void *barrier);
+void AnnotateBarrierWaitAfter(const char *file, int line,
+                              const volatile void *barrier);
+void AnnotateBarrierDestroy(const char *file, int line,
+                            const volatile void *barrier);
+void AnnotateCondVarWait(const char *file, int line,
+                         const volatile void *cv,
+                         const volatile void *lock);
+void AnnotateCondVarSignal(const char *file, int line,
+                           const volatile void *cv);
+void AnnotateCondVarSignalAll(const char *file, int line,
+                              const volatile void *cv);
+void AnnotatePublishMemoryRange(const char *file, int line,
+                                const volatile void *address,
+                                long size);
+void AnnotateUnpublishMemoryRange(const char *file, int line,
+                                  const volatile void *address,
+                                  long size);
+void AnnotatePCQCreate(const char *file, int line,
+                       const volatile void *pcq);
+void AnnotatePCQDestroy(const char *file, int line,
+                        const volatile void *pcq);
+void AnnotatePCQPut(const char *file, int line,
+                    const volatile void *pcq);
+void AnnotatePCQGet(const char *file, int line,
+                    const volatile void *pcq);
+void AnnotateNewMemory(const char *file, int line,
+                       const volatile void *address,
+                       long size);
+void AnnotateExpectRace(const char *file, int line,
+                        const volatile void *address,
+                        const char *description);
+void AnnotateBenignRace(const char *file, int line,
+                        const volatile void *address,
+                        const char *description);
+void AnnotateBenignRaceSized(const char *file, int line,
+                        const volatile void *address,
+                        long size,
+                        const char *description);
+void AnnotateMutexIsUsedAsCondVar(const char *file, int line,
+                                  const volatile void *mu);
+void AnnotateTraceMemory(const char *file, int line,
+                         const volatile void *arg);
+void AnnotateThreadName(const char *file, int line,
+                        const char *name);
+ANNOTALYSIS_STATIC_INLINE
+void AnnotateIgnoreReadsBegin(const char *file, int line)
+    ANNOTALYSIS_IGNORE_READS_BEGIN ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+ANNOTALYSIS_STATIC_INLINE
+void AnnotateIgnoreReadsEnd(const char *file, int line)
+    ANNOTALYSIS_IGNORE_READS_END ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+ANNOTALYSIS_STATIC_INLINE
+void AnnotateIgnoreWritesBegin(const char *file, int line)
+    ANNOTALYSIS_IGNORE_WRITES_BEGIN ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+ANNOTALYSIS_STATIC_INLINE
+void AnnotateIgnoreWritesEnd(const char *file, int line)
+    ANNOTALYSIS_IGNORE_WRITES_END ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+void AnnotateEnableRaceDetection(const char *file, int line, int enable);
+void AnnotateNoOp(const char *file, int line,
+                  const volatile void *arg);
+void AnnotateFlushState(const char *file, int line);
+
+/* Return non-zero value if running under valgrind.
+
+  If "valgrind.h" is included into dynamic_annotations.c,
+  the regular valgrind mechanism will be used.
+  See http://valgrind.org/docs/manual/manual-core-adv.html about
+  RUNNING_ON_VALGRIND and other valgrind "client requests".
+  The file "valgrind.h" may be obtained by doing
+     svn co svn://svn.valgrind.org/valgrind/trunk/include
+
+  If for some reason you can't use "valgrind.h" or want to fake valgrind,
+  there are two ways to make this function return non-zero:
+    - Use environment variable: export RUNNING_ON_VALGRIND=1
+    - Make your tool intercept the function RunningOnValgrind() and
+      change its return value.
+ */
+int RunningOnValgrind(void);
+
+/* ValgrindSlowdown returns:
+    * 1.0, if (RunningOnValgrind() == 0)
+    * 50.0, if (RunningOnValgrind() != 0 && getenv("VALGRIND_SLOWDOWN") == NULL)
+    * atof(getenv("VALGRIND_SLOWDOWN")) otherwise
+   This function can be used to scale timeout values:
+   EXAMPLE:
+   for (;;) {
+     DoExpensiveBackgroundTask();
+     SleepForSeconds(5 * ValgrindSlowdown());
+   }
+ */
+double ValgrindSlowdown(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#if DYNAMIC_ANNOTATIONS_ENABLED != 0 && defined(__cplusplus)
+
+  /* ANNOTATE_UNPROTECTED_READ is the preferred way to annotate racey reads.
+
+     Instead of doing
+        ANNOTATE_IGNORE_READS_BEGIN();
+        ... = x;
+        ANNOTATE_IGNORE_READS_END();
+     one can use
+        ... = ANNOTATE_UNPROTECTED_READ(x); */
+  template <class T>
+  inline T ANNOTATE_UNPROTECTED_READ(const volatile T &x)
+      ANNOTALYSIS_UNPROTECTED_READ {
+    ANNOTATE_IGNORE_READS_BEGIN();
+    T res = x;
+    ANNOTATE_IGNORE_READS_END();
+    return res;
+  }
+  /* Apply ANNOTATE_BENIGN_RACE_SIZED to a static variable. */
+  #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description)        \
+    namespace {                                                       \
+      class static_var ## _annotator {                                \
+       public:                                                        \
+        static_var ## _annotator() {                                  \
+          ANNOTATE_BENIGN_RACE_SIZED(&static_var,                     \
+                                      sizeof(static_var),             \
+            # static_var ": " description);                           \
+        }                                                             \
+      };                                                              \
+      static static_var ## _annotator the ## static_var ## _annotator;\
+    }
+#else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
+
+  #define ANNOTATE_UNPROTECTED_READ(x) (x)
+  #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description)  /* empty */
+
+#endif /* DYNAMIC_ANNOTATIONS_ENABLED */
+
+/* Annotalysis, a GCC based static analyzer, is able to understand and use
+   some of the dynamic annotations defined in this file. However, dynamic
+   annotations are usually disabled in the opt mode (to avoid additional
+   runtime overheads) while Annotalysis only works in the opt mode.
+   In order for Annotalysis to use these dynamic annotations when they
+   are disabled, we re-define these annotations here. Note that unlike the
+   original macro definitions above, these macros are expanded to calls to
+   static inline functions so that the compiler will be able to remove the
+   calls after the analysis. */
+
+#ifdef ANNOTALYSIS_ONLY
+
+  #undef ANNOTALYSIS_ONLY
+
+  /* Undefine and re-define the macros that the static analyzer understands. */
+  #undef ANNOTATE_IGNORE_READS_BEGIN
+  #define ANNOTATE_IGNORE_READS_BEGIN()           \
+    AnnotateIgnoreReadsBegin(__FILE__, __LINE__)
+
+  #undef ANNOTATE_IGNORE_READS_END
+  #define ANNOTATE_IGNORE_READS_END()             \
+    AnnotateIgnoreReadsEnd(__FILE__, __LINE__)
+
+  #undef ANNOTATE_IGNORE_WRITES_BEGIN
+  #define ANNOTATE_IGNORE_WRITES_BEGIN()          \
+    AnnotateIgnoreWritesBegin(__FILE__, __LINE__)
+
+  #undef ANNOTATE_IGNORE_WRITES_END
+  #define ANNOTATE_IGNORE_WRITES_END()            \
+    AnnotateIgnoreWritesEnd(__FILE__, __LINE__)
+
+  #undef ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN()       \
+    do {                                                 \
+      ANNOTATE_IGNORE_READS_BEGIN();                     \
+      ANNOTATE_IGNORE_WRITES_BEGIN();                    \
+    }while(0)                                            \
+
+  #undef ANNOTATE_IGNORE_READS_AND_WRITES_END
+  #define ANNOTATE_IGNORE_READS_AND_WRITES_END()  \
+    do {                                          \
+      ANNOTATE_IGNORE_WRITES_END();               \
+      ANNOTATE_IGNORE_READS_END();                \
+    }while(0)                                     \
+
+  #if defined(__cplusplus)
+    #undef ANNOTATE_UNPROTECTED_READ
+    template <class T>
+    inline T ANNOTATE_UNPROTECTED_READ(const volatile T &x)
+         ANNOTALYSIS_UNPROTECTED_READ {
+      ANNOTATE_IGNORE_READS_BEGIN();
+      T res = x;
+      ANNOTATE_IGNORE_READS_END();
+      return res;
+    }
+  #endif /* __cplusplus */
+
+#endif /* ANNOTALYSIS_ONLY */
+
+/* Undefine the macros intended only in this file. */
+#undef ANNOTALYSIS_STATIC_INLINE
+#undef ANNOTALYSIS_SEMICOLON_OR_EMPTY_BODY
+
+#endif  /* BASE_DYNAMIC_ANNOTATIONS_H_ */