Squashed 'third_party/gperftools/' content from commit 54505f1
Change-Id: Id02e833828732b0efe7dac722b8485279e67c5fa
git-subtree-dir: third_party/gperftools
git-subtree-split: 54505f1d50c2d1f4676f5e87090b64a117fd980e
diff --git a/m4/ac_have_attribute.m4 b/m4/ac_have_attribute.m4
new file mode 100644
index 0000000..19f4021
--- /dev/null
+++ b/m4/ac_have_attribute.m4
@@ -0,0 +1,16 @@
+AC_DEFUN([AX_C___ATTRIBUTE__], [
+ AC_MSG_CHECKING(for __attribute__)
+ AC_CACHE_VAL(ac_cv___attribute__, [
+ AC_TRY_COMPILE(
+ [#include <stdlib.h>
+ static void foo(void) __attribute__ ((unused));
+ void foo(void) { exit(1); }],
+ [],
+ ac_cv___attribute__=yes,
+ ac_cv___attribute__=no
+ )])
+ if test "$ac_cv___attribute__" = "yes"; then
+ AC_DEFINE(HAVE___ATTRIBUTE__, 1, [define if your compiler has __attribute__])
+ fi
+ AC_MSG_RESULT($ac_cv___attribute__)
+])
diff --git a/m4/acx_nanosleep.m4 b/m4/acx_nanosleep.m4
new file mode 100644
index 0000000..1d44392
--- /dev/null
+++ b/m4/acx_nanosleep.m4
@@ -0,0 +1,35 @@
+# Check for support for nanosleep. It's defined in <time.h>, but on
+# some systems, such as solaris, you need to link in a library to use it.
+# We set acx_nanosleep_ok if nanosleep is supported; in that case,
+# NANOSLEEP_LIBS is set to whatever libraries are needed to support
+# nanosleep.
+
+AC_DEFUN([ACX_NANOSLEEP],
+[AC_MSG_CHECKING(if nanosleep requires any libraries)
+ AC_LANG_SAVE
+ AC_LANG_C
+ acx_nanosleep_ok="no"
+ NANOSLEEP_LIBS=
+ # For most folks, this should just work
+ AC_TRY_LINK([#include <time.h>],
+ [static struct timespec ts; nanosleep(&ts, NULL);],
+ [acx_nanosleep_ok=yes])
+ # For solaris, we may need -lrt
+ if test "x$acx_nanosleep_ok" != "xyes"; then
+ OLD_LIBS="$LIBS"
+ LIBS="-lrt $LIBS"
+ AC_TRY_LINK([#include <time.h>],
+ [static struct timespec ts; nanosleep(&ts, NULL);],
+ [acx_nanosleep_ok=yes])
+ if test "x$acx_nanosleep_ok" = "xyes"; then
+ NANOSLEEP_LIBS="-lrt"
+ fi
+ LIBS="$OLD_LIBS"
+ fi
+ if test "x$acx_nanosleep_ok" != "xyes"; then
+ AC_MSG_ERROR([cannot find the nanosleep function])
+ else
+ AC_MSG_RESULT(${NANOSLEEP_LIBS:-no})
+ fi
+ AC_LANG_RESTORE
+])
diff --git a/m4/acx_pthread.m4 b/m4/acx_pthread.m4
new file mode 100644
index 0000000..89d42c7
--- /dev/null
+++ b/m4/acx_pthread.m4
@@ -0,0 +1,397 @@
+# This was retrieved from
+# http://svn.0pointer.de/viewvc/trunk/common/acx_pthread.m4?revision=1277&root=avahi
+# See also (perhaps for new versions?)
+# http://svn.0pointer.de/viewvc/trunk/common/acx_pthread.m4?root=avahi
+#
+# We've rewritten the inconsistency check code (from avahi), to work
+# more broadly. In particular, it no longer assumes ld accepts -zdefs.
+# This caused a restructing of the code, but the functionality has only
+# changed a little.
+
+dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+dnl
+dnl @summary figure out how to build C programs using POSIX threads
+dnl
+dnl This macro figures out how to build C programs using POSIX threads.
+dnl It sets the PTHREAD_LIBS output variable to the threads library and
+dnl linker flags, and the PTHREAD_CFLAGS output variable to any special
+dnl C compiler flags that are needed. (The user can also force certain
+dnl compiler flags/libs to be tested by setting these environment
+dnl variables.)
+dnl
+dnl Also sets PTHREAD_CC to any special C compiler that is needed for
+dnl multi-threaded programs (defaults to the value of CC otherwise).
+dnl (This is necessary on AIX to use the special cc_r compiler alias.)
+dnl
+dnl NOTE: You are assumed to not only compile your program with these
+dnl flags, but also link it with them as well. e.g. you should link
+dnl with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
+dnl $LIBS
+dnl
+dnl If you are only building threads programs, you may wish to use
+dnl these variables in your default LIBS, CFLAGS, and CC:
+dnl
+dnl LIBS="$PTHREAD_LIBS $LIBS"
+dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+dnl CC="$PTHREAD_CC"
+dnl
+dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
+dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
+dnl that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+dnl
+dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
+dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands to
+dnl run it if it is not found. If ACTION-IF-FOUND is not specified, the
+dnl default action will define HAVE_PTHREAD.
+dnl
+dnl Please let the authors know if this macro fails on any platform, or
+dnl if you have any other suggestions or comments. This macro was based
+dnl on work by SGJ on autoconf scripts for FFTW (www.fftw.org) (with
+dnl help from M. Frigo), as well as ac_pthread and hb_pthread macros
+dnl posted by Alejandro Forero Cuervo to the autoconf macro repository.
+dnl We are also grateful for the helpful feedback of numerous users.
+dnl
+dnl @category InstalledPackages
+dnl @author Steven G. Johnson <stevenj@alum.mit.edu>
+dnl @version 2006-05-29
+dnl @license GPLWithACException
+dnl
+dnl Checks for GCC shared/pthread inconsistency based on work by
+dnl Marcin Owsiany <marcin@owsiany.pl>
+
+
+AC_DEFUN([ACX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_SAVE
+AC_LANG_C
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+ AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
+ AC_MSG_RESULT($acx_pthread_ok)
+ if test x"$acx_pthread_ok" = xno; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads too;
+# also defines -D_REENTRANT)
+# ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+ *solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (We need to link with -pthreads/-mt/
+ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
+ # a function called by this macro, so we could check for that, but
+ # who knows whether they'll stub that too in a future libc.) So,
+ # we'll just look for -pthreads and -lpthread first:
+
+ acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
+ ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+ case $flag in
+ none)
+ AC_MSG_CHECKING([whether pthreads work without any flags])
+ ;;
+
+ -*)
+ AC_MSG_CHECKING([whether pthreads work with $flag])
+ PTHREAD_CFLAGS="$flag"
+ ;;
+
+ pthread-config)
+ AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
+ if test x"$acx_pthread_config" = xno; then continue; fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ AC_MSG_CHECKING([for the pthreads library -l$flag])
+ PTHREAD_LIBS="-l$flag"
+ ;;
+ esac
+
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [acx_pthread_ok=yes])
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ AC_MSG_RESULT($acx_pthread_ok)
+ if test "x$acx_pthread_ok" = xyes; then
+ break;
+ fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ AC_MSG_CHECKING([for joinable pthread attribute])
+ attr_name=unknown
+ for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ AC_TRY_LINK([#include <pthread.h>], [int attr=$attr; return attr;],
+ [attr_name=$attr; break])
+ done
+ AC_MSG_RESULT($attr_name)
+ if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+ AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
+ [Define to necessary symbol if this constant
+ uses a non-standard name on your system.])
+ fi
+
+ AC_MSG_CHECKING([if more special flags are required for pthreads])
+ flag=no
+ case "${host_cpu}-${host_os}" in
+ *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+ *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+ esac
+ AC_MSG_RESULT(${flag})
+ if test "x$flag" != xno; then
+ PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+ fi
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+ # More AIX lossage: must compile with xlc_r or cc_r
+ if test x"$GCC" != xyes; then
+ AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
+ else
+ PTHREAD_CC=$CC
+ fi
+
+ # The next part tries to detect GCC inconsistency with -shared on some
+ # architectures and systems. The problem is that in certain
+ # configurations, when -shared is specified, GCC "forgets" to
+ # internally use various flags which are still necessary.
+
+ #
+ # Prepare the flags
+ #
+ save_CFLAGS="$CFLAGS"
+ save_LIBS="$LIBS"
+ save_CC="$CC"
+
+ # Try with the flags determined by the earlier checks.
+ #
+ # -Wl,-z,defs forces link-time symbol resolution, so that the
+ # linking checks with -shared actually have any value
+ #
+ # FIXME: -fPIC is required for -shared on many architectures,
+ # so we specify it here, but the right way would probably be to
+ # properly detect whether it is actually required.
+ CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CC="$PTHREAD_CC"
+
+ # In order not to create several levels of indentation, we test
+ # the value of "$done" until we find the cure or run out of ideas.
+ done="no"
+
+ # First, make sure the CFLAGS we added are actually accepted by our
+ # compiler. If not (and OS X's ld, for instance, does not accept -z),
+ # then we can't do this test.
+ if test x"$done" = xno; then
+ AC_MSG_CHECKING([whether to check for GCC pthread/shared inconsistencies])
+ AC_TRY_LINK(,, , [done=yes])
+
+ if test "x$done" = xyes ; then
+ AC_MSG_RESULT([no])
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+
+ if test x"$done" = xno; then
+ AC_MSG_CHECKING([whether -pthread is sufficient with -shared])
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [done=yes])
+
+ if test "x$done" = xyes; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+
+ #
+ # Linux gcc on some architectures such as mips/mipsel forgets
+ # about -lpthread
+ #
+ if test x"$done" = xno; then
+ AC_MSG_CHECKING([whether -lpthread fixes that])
+ LIBS="-lpthread $PTHREAD_LIBS $save_LIBS"
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [done=yes])
+
+ if test "x$done" = xyes; then
+ AC_MSG_RESULT([yes])
+ PTHREAD_LIBS="-lpthread $PTHREAD_LIBS"
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+ #
+ # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc
+ #
+ if test x"$done" = xno; then
+ AC_MSG_CHECKING([whether -lc_r fixes that])
+ LIBS="-lc_r $PTHREAD_LIBS $save_LIBS"
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [done=yes])
+
+ if test "x$done" = xyes; then
+ AC_MSG_RESULT([yes])
+ PTHREAD_LIBS="-lc_r $PTHREAD_LIBS"
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+ if test x"$done" = xno; then
+ # OK, we have run out of ideas
+ AC_MSG_WARN([Impossible to determine how to use pthreads with shared libraries])
+
+ # so it's not safe to assume that we may use pthreads
+ acx_pthread_ok=no
+ fi
+
+ AC_MSG_CHECKING([whether what we have so far is sufficient with -nostdlib])
+ CFLAGS="-nostdlib $CFLAGS"
+ # we need c with nostdlib
+ LIBS="$LIBS -lc"
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [done=yes],[done=no])
+
+ if test "x$done" = xyes; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+
+ if test x"$done" = xno; then
+ AC_MSG_CHECKING([whether -lpthread saves the day])
+ LIBS="-lpthread $LIBS"
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [done=yes],[done=no])
+
+ if test "x$done" = xyes; then
+ AC_MSG_RESULT([yes])
+ PTHREAD_LIBS="$PTHREAD_LIBS -lpthread"
+ else
+ AC_MSG_RESULT([no])
+ AC_MSG_WARN([Impossible to determine how to use pthreads with shared libraries and -nostdlib])
+ fi
+ fi
+
+ CFLAGS="$save_CFLAGS"
+ LIBS="$save_LIBS"
+ CC="$save_CC"
+else
+ PTHREAD_CC="$CC"
+fi
+
+AC_SUBST(PTHREAD_LIBS)
+AC_SUBST(PTHREAD_CFLAGS)
+AC_SUBST(PTHREAD_CC)
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+ ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
+ :
+else
+ acx_pthread_ok=no
+ $2
+fi
+AC_LANG_RESTORE
+])dnl ACX_PTHREAD
diff --git a/m4/compiler_characteristics.m4 b/m4/compiler_characteristics.m4
new file mode 100644
index 0000000..2b62893
--- /dev/null
+++ b/m4/compiler_characteristics.m4
@@ -0,0 +1,24 @@
+# Check compiler characteristics (e.g. type sizes, PRIxx macros, ...)
+
+# If types $1 and $2 are compatible, perform action $3
+AC_DEFUN([AC_TYPES_COMPATIBLE],
+ [AC_TRY_COMPILE([#include <stddef.h>], [$1 v1 = 0; $2 v2 = 0; return (&v1 - &v2)], $3)])
+
+define(AC_PRIUS_COMMENT, [printf format code for printing a size_t and ssize_t])
+
+AC_DEFUN([AC_COMPILER_CHARACTERISTICS],
+ [AC_CACHE_CHECK(AC_PRIUS_COMMENT, ac_cv_formatting_prius_prefix,
+ [AC_TYPES_COMPATIBLE(unsigned int, size_t,
+ ac_cv_formatting_prius_prefix=; ac_cv_prius_defined=1)
+ AC_TYPES_COMPATIBLE(unsigned long, size_t,
+ ac_cv_formatting_prius_prefix=l; ac_cv_prius_defined=1)
+ AC_TYPES_COMPATIBLE(unsigned long long, size_t,
+ ac_cv_formatting_prius_prefix=ll; ac_cv_prius_defined=1
+ )])
+ if test -z "$ac_cv_prius_defined"; then
+ ac_cv_formatting_prius_prefix=z;
+ fi
+ AC_DEFINE_UNQUOTED(PRIuS, "${ac_cv_formatting_prius_prefix}u", AC_PRIUS_COMMENT)
+ AC_DEFINE_UNQUOTED(PRIxS, "${ac_cv_formatting_prius_prefix}x", AC_PRIUS_COMMENT)
+ AC_DEFINE_UNQUOTED(PRIdS, "${ac_cv_formatting_prius_prefix}d", AC_PRIUS_COMMENT)
+])
diff --git a/m4/install_prefix.m4 b/m4/install_prefix.m4
new file mode 100644
index 0000000..ef33f42
--- /dev/null
+++ b/m4/install_prefix.m4
@@ -0,0 +1,8 @@
+AC_DEFUN([AC_INSTALL_PREFIX],
+ [ac_cv_install_prefix="$prefix";
+ if test x"$ac_cv_install_prefix" = x"NONE" ; then
+ ac_cv_install_prefix="$ac_default_prefix";
+ fi
+ AC_DEFINE_UNQUOTED(INSTALL_PREFIX, "$ac_cv_install_prefix",
+ [prefix where we look for installed files])
+ ])
diff --git a/m4/namespaces.m4 b/m4/namespaces.m4
new file mode 100644
index 0000000..d78dbe4
--- /dev/null
+++ b/m4/namespaces.m4
@@ -0,0 +1,15 @@
+# Checks whether the compiler implements namespaces
+AC_DEFUN([AC_CXX_NAMESPACES],
+ [AC_CACHE_CHECK(whether the compiler implements namespaces,
+ ac_cv_cxx_namespaces,
+ [AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([namespace Outer {
+ namespace Inner { int i = 0; }}],
+ [using namespace Outer::Inner; return i;],
+ ac_cv_cxx_namespaces=yes,
+ ac_cv_cxx_namespaces=no)
+ AC_LANG_RESTORE])
+ if test "$ac_cv_cxx_namespaces" = yes; then
+ AC_DEFINE(HAVE_NAMESPACES, 1, [define if the compiler implements namespaces])
+ fi])
diff --git a/m4/pc_from_ucontext.m4 b/m4/pc_from_ucontext.m4
new file mode 100644
index 0000000..b4fd0d0
--- /dev/null
+++ b/m4/pc_from_ucontext.m4
@@ -0,0 +1,97 @@
+# We want to access the "PC" (Program Counter) register from a struct
+# ucontext. Every system has its own way of doing that. We try all the
+# possibilities we know about. Note REG_PC should come first (REG_RIP
+# is also defined on solaris, but does the wrong thing).
+
+# OpenBSD doesn't have ucontext.h, but we can get PC from ucontext_t
+# by using signal.h.
+
+# The first argument of AC_PC_FROM_UCONTEXT will be invoked when we
+# cannot find a way to obtain PC from ucontext.
+
+AC_DEFUN([AC_PC_FROM_UCONTEXT],
+ [AC_CHECK_HEADERS(ucontext.h)
+ # Redhat 7 has <sys/ucontext.h>, but it barfs if we #include it directly
+ # (this was fixed in later redhats). <ucontext.h> works fine, so use that.
+ if grep "Red Hat Linux release 7" /etc/redhat-release >/dev/null 2>&1; then
+ AC_DEFINE(HAVE_SYS_UCONTEXT_H, 0, [<sys/ucontext.h> is broken on redhat 7])
+ ac_cv_header_sys_ucontext_h=no
+ else
+ AC_CHECK_HEADERS(sys/ucontext.h) # ucontext on OS X 10.6 (at least)
+ fi
+ AC_CHECK_HEADERS(cygwin/signal.h) # ucontext on cywgin
+ AC_MSG_CHECKING([how to access the program counter from a struct ucontext])
+ pc_fields=" uc_mcontext.gregs[[REG_PC]]" # Solaris x86 (32 + 64 bit)
+ pc_fields="$pc_fields uc_mcontext.gregs[[REG_EIP]]" # Linux (i386)
+ pc_fields="$pc_fields uc_mcontext.gregs[[REG_RIP]]" # Linux (x86_64)
+ pc_fields="$pc_fields uc_mcontext.sc_ip" # Linux (ia64)
+ pc_fields="$pc_fields uc_mcontext.pc" # Linux (mips)
+ pc_fields="$pc_fields uc_mcontext.uc_regs->gregs[[PT_NIP]]" # Linux (ppc)
+ pc_fields="$pc_fields uc_mcontext.gregs[[R15]]" # Linux (arm old [untested])
+ pc_fields="$pc_fields uc_mcontext.arm_pc" # Linux (arm arch 5)
+ pc_fields="$pc_fields uc_mcontext.gp_regs[[PT_NIP]]" # Suse SLES 11 (ppc64)
+ pc_fields="$pc_fields uc_mcontext.mc_eip" # FreeBSD (i386)
+ pc_fields="$pc_fields uc_mcontext.mc_rip" # FreeBSD (x86_64 [untested])
+ pc_fields="$pc_fields uc_mcontext.__gregs[[_REG_EIP]]" # NetBSD (i386)
+ pc_fields="$pc_fields uc_mcontext.__gregs[[_REG_RIP]]" # NetBSD (x86_64)
+ pc_fields="$pc_fields uc_mcontext->ss.eip" # OS X (i386, <=10.4)
+ pc_fields="$pc_fields uc_mcontext->__ss.__eip" # OS X (i386, >=10.5)
+ pc_fields="$pc_fields uc_mcontext->ss.rip" # OS X (x86_64)
+ pc_fields="$pc_fields uc_mcontext->__ss.__rip" # OS X (>=10.5 [untested])
+ pc_fields="$pc_fields uc_mcontext->ss.srr0" # OS X (ppc, ppc64 [untested])
+ pc_fields="$pc_fields uc_mcontext->__ss.__srr0" # OS X (>=10.5 [untested])
+ pc_field_found=false
+ for pc_field in $pc_fields; do
+ if ! $pc_field_found; then
+ # Prefer sys/ucontext.h to ucontext.h, for OS X's sake.
+ if test "x$ac_cv_header_cygwin_signal_h" = xyes; then
+ AC_TRY_COMPILE([#define _GNU_SOURCE 1
+ #include <cygwin/signal.h>],
+ [ucontext_t u; return u.$pc_field == 0;],
+ AC_DEFINE_UNQUOTED(PC_FROM_UCONTEXT, $pc_field,
+ How to access the PC from a struct ucontext)
+ AC_MSG_RESULT([$pc_field])
+ pc_field_found=true)
+ elif test "x$ac_cv_header_sys_ucontext_h" = xyes; then
+ AC_TRY_COMPILE([#define _GNU_SOURCE 1
+ #include <sys/ucontext.h>],
+ [ucontext_t u; return u.$pc_field == 0;],
+ AC_DEFINE_UNQUOTED(PC_FROM_UCONTEXT, $pc_field,
+ How to access the PC from a struct ucontext)
+ AC_MSG_RESULT([$pc_field])
+ pc_field_found=true)
+ elif test "x$ac_cv_header_ucontext_h" = xyes; then
+ AC_TRY_COMPILE([#define _GNU_SOURCE 1
+ #include <ucontext.h>],
+ [ucontext_t u; return u.$pc_field == 0;],
+ AC_DEFINE_UNQUOTED(PC_FROM_UCONTEXT, $pc_field,
+ How to access the PC from a struct ucontext)
+ AC_MSG_RESULT([$pc_field])
+ pc_field_found=true)
+ else # hope some standard header gives it to us
+ AC_TRY_COMPILE([],
+ [ucontext_t u; return u.$pc_field == 0;],
+ AC_DEFINE_UNQUOTED(PC_FROM_UCONTEXT, $pc_field,
+ How to access the PC from a struct ucontext)
+ AC_MSG_RESULT([$pc_field])
+ pc_field_found=true)
+ fi
+ fi
+ done
+ if ! $pc_field_found; then
+ pc_fields=" sc_eip" # OpenBSD (i386)
+ pc_fields="$pc_fields sc_rip" # OpenBSD (x86_64)
+ for pc_field in $pc_fields; do
+ if ! $pc_field_found; then
+ AC_TRY_COMPILE([#include <signal.h>],
+ [ucontext_t u; return u.$pc_field == 0;],
+ AC_DEFINE_UNQUOTED(PC_FROM_UCONTEXT, $pc_field,
+ How to access the PC from a struct ucontext)
+ AC_MSG_RESULT([$pc_field])
+ pc_field_found=true)
+ fi
+ done
+ fi
+ if ! $pc_field_found; then
+ [$1]
+ fi])
diff --git a/m4/program_invocation_name.m4 b/m4/program_invocation_name.m4
new file mode 100644
index 0000000..6161f66
--- /dev/null
+++ b/m4/program_invocation_name.m4
@@ -0,0 +1,19 @@
+# We need to be careful to avoid having the reference to
+# program_invocation_name optimized out. We do that by
+# returning the value.
+
+AC_DEFUN([AC_PROGRAM_INVOCATION_NAME],
+ [AC_CACHE_CHECK(
+ for program_invocation_name,
+ ac_cv_have_program_invocation_name,
+ AC_TRY_LINK([extern char* program_invocation_name;],
+ [return *program_invocation_name;],
+ [ac_cv_have_program_invocation_name=yes],
+ [ac_cv_have_program_invocation_name=no])
+ )
+ if test "$ac_cv_have_program_invocation_name" = "yes"; then
+ AC_DEFINE(HAVE_PROGRAM_INVOCATION_NAME, 1,
+ [define if libc has program_invocation_name])
+ fi
+ ])
+
diff --git a/m4/stl_namespace.m4 b/m4/stl_namespace.m4
new file mode 100644
index 0000000..989ad80
--- /dev/null
+++ b/m4/stl_namespace.m4
@@ -0,0 +1,25 @@
+# We check what namespace stl code like vector expects to be executed in
+
+AC_DEFUN([AC_CXX_STL_NAMESPACE],
+ [AC_CACHE_CHECK(
+ what namespace STL code is in,
+ ac_cv_cxx_stl_namespace,
+ [AC_REQUIRE([AC_CXX_NAMESPACES])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([#include <vector>],
+ [vector<int> t; return 0;],
+ ac_cv_cxx_stl_namespace=none)
+ AC_TRY_COMPILE([#include <vector>],
+ [std::vector<int> t; return 0;],
+ ac_cv_cxx_stl_namespace=std)
+ AC_LANG_RESTORE])
+ if test "$ac_cv_cxx_stl_namespace" = none; then
+ AC_DEFINE(STL_NAMESPACE,,
+ [the namespace where STL code like vector<> is defined])
+ fi
+ if test "$ac_cv_cxx_stl_namespace" = std; then
+ AC_DEFINE(STL_NAMESPACE,std,
+ [the namespace where STL code like vector<> is defined])
+ fi
+])