Added bypass caps, pullup resistors, the crystal, gyro, and did some initial layout.
diff --git a/bbb_cape/schematic/packages/1812.fp b/bbb_cape/schematic/packages/1812.fp
new file mode 100644
index 0000000..d0210c9
--- /dev/null
+++ b/bbb_cape/schematic/packages/1812.fp
@@ -0,0 +1,11 @@
+Element["" "1812" "1812" "1812" 15.0000mm 1574.80mil -3.7498mm -39.38mil 0 100 ""]
+(
+ Pad[98.43mil -19.68mil 98.43mil 19.69mil 94.80mil 39.37mil 2.5080mm "2" "2" "square"]
+ Pad[-98.42mil -19.68mil -98.42mil 19.69mil 94.80mil 39.37mil 2.5080mm "1" "1" "square"]
+ ElementLine [-157.48mil -59.05mil -137.79mil -2.0000mm 8.00mil]
+ ElementLine [-157.48mil 2.0000mm -157.48mil -59.05mil 8.00mil]
+ ElementLine [157.48mil 2.0000mm -157.48mil 2.0000mm 8.00mil]
+ ElementLine [157.48mil -2.0000mm 157.48mil 2.0000mm 8.00mil]
+ ElementLine [-137.79mil -2.0000mm 157.48mil -2.0000mm 8.00mil]
+
+ )
diff --git a/bbb_cape/schematic/packages/ABMM2.fp b/bbb_cape/schematic/packages/ABMM2.fp
new file mode 100644
index 0000000..66d118d
--- /dev/null
+++ b/bbb_cape/schematic/packages/ABMM2.fp
@@ -0,0 +1,12 @@
+# author: Bdale Garbee
+# email: bdale@gag.com
+# dist-license: GPL 2
+# use-license: unlimited
+Element[0x0 "ABM8" "" "" 0 0 0 0 0 100 0x0]
+(
+ Pad[ 5512 -9349 5512 -12007 7480 -3936 8080 "pin2" "2" 0x0100]
+ Pad[ 5512 9350 5512 12008 7480 -3936 8080 "pin1" "1" 0x0100]
+ Pad[ -5511 9350 -5511 12008 7480 -3936 8080 "pin4" "4" 0x0100]
+ Pad[ -5511 -9349 -5511 -12007 7480 -3936 8080 "pin3" "3" 0x0100]
+ ElementArc[ 709 13720 500 500 0 360 1000 ]
+)