Squashed 'third_party/allwpilib_2019/' content from commit bd05dfa1c
Change-Id: I2b1c2250cdb9b055133780c33593292098c375b7
git-subtree-dir: third_party/allwpilib_2019
git-subtree-split: bd05dfa1c7cca74c4fac451e7b9d6a37e7b53447
diff --git a/wpilibc/src/main/native/cpp/DMC60.cpp b/wpilibc/src/main/native/cpp/DMC60.cpp
new file mode 100644
index 0000000..7dc2d8d
--- /dev/null
+++ b/wpilibc/src/main/native/cpp/DMC60.cpp
@@ -0,0 +1,36 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) 2008-2018 FIRST. All Rights Reserved. */
+/* Open Source Software - may be modified and shared by FRC teams. The code */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project. */
+/*----------------------------------------------------------------------------*/
+
+#include "frc/DMC60.h"
+
+#include <hal/HAL.h>
+
+using namespace frc;
+
+DMC60::DMC60(int channel) : PWMSpeedController(channel) {
+ /*
+ * Note that the DMC 60 uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the DMC 60 User
+ * Manual available from Digilent.
+ *
+ * 2.004ms = full "forward"
+ * 1.52ms = the "high end" of the deadband range
+ * 1.50ms = center of the deadband range (off)
+ * 1.48ms = the "low end" of the deadband range
+ * 0.997ms = full "reverse"
+ */
+ SetBounds(2.004, 1.52, 1.50, 1.48, .997);
+ SetPeriodMultiplier(kPeriodMultiplier_1X);
+ SetSpeed(0.0);
+ SetZeroLatch();
+
+ HAL_Report(HALUsageReporting::kResourceType_DigilentDMC60, GetChannel());
+ SetName("DMC60", GetChannel());
+}