diff --git a/src/host/hub.c b/src/host/hub.c
new file mode 100644
index 0000000..fd4dbd0
--- /dev/null
+++ b/src/host/hub.c
@@ -0,0 +1,388 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_HUB)
+
+#include "usbh.h"
+#include "usbh_classdriver.h"
+#include "hub.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF
+//--------------------------------------------------------------------+
+typedef struct
+{
+  uint8_t itf_num;
+  uint8_t ep_in;
+  uint8_t port_count;
+  uint8_t status_change; // data from status change interrupt endpoint
+
+  hub_port_status_response_t port_status;
+} hub_interface_t;
+
+CFG_TUSB_MEM_SECTION static hub_interface_t hub_data[CFG_TUH_HUB];
+CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(4) static uint8_t _hub_buffer[sizeof(descriptor_hub_desc_t)];
+
+TU_ATTR_ALWAYS_INLINE
+static inline hub_interface_t* get_itf(uint8_t dev_addr)
+{
+  return &hub_data[dev_addr-1-CFG_TUH_DEVICE_MAX];
+}
+
+#if CFG_TUSB_DEBUG
+static char const* const _hub_feature_str[] =
+{
+  [HUB_FEATURE_PORT_CONNECTION          ] = "PORT_CONNECTION",
+  [HUB_FEATURE_PORT_ENABLE              ] = "PORT_ENABLE",
+  [HUB_FEATURE_PORT_SUSPEND             ] = "PORT_SUSPEND",
+  [HUB_FEATURE_PORT_OVER_CURRENT        ] = "PORT_OVER_CURRENT",
+  [HUB_FEATURE_PORT_RESET               ] = "PORT_RESET",
+  [HUB_FEATURE_PORT_POWER               ] = "PORT_POWER",
+  [HUB_FEATURE_PORT_LOW_SPEED           ] = "PORT_LOW_SPEED",
+  [HUB_FEATURE_PORT_CONNECTION_CHANGE   ] = "PORT_CONNECTION_CHANGE",
+  [HUB_FEATURE_PORT_ENABLE_CHANGE       ] = "PORT_ENABLE_CHANGE",
+  [HUB_FEATURE_PORT_SUSPEND_CHANGE      ] = "PORT_SUSPEND_CHANGE",
+  [HUB_FEATURE_PORT_OVER_CURRENT_CHANGE ] = "PORT_OVER_CURRENT_CHANGE",
+  [HUB_FEATURE_PORT_RESET_CHANGE        ] = "PORT_RESET_CHANGE",
+  [HUB_FEATURE_PORT_TEST                ] = "PORT_TEST",
+  [HUB_FEATURE_PORT_INDICATOR           ] = "PORT_INDICATOR",
+};
+#endif
+
+//--------------------------------------------------------------------+
+// HUB
+//--------------------------------------------------------------------+
+bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb)
+{
+  tusb_control_request_t const request =
+  {
+    .bmRequestType_bit =
+    {
+      .recipient = TUSB_REQ_RCPT_OTHER,
+      .type      = TUSB_REQ_TYPE_CLASS,
+      .direction = TUSB_DIR_OUT
+    },
+    .bRequest = HUB_REQUEST_CLEAR_FEATURE,
+    .wValue   = feature,
+    .wIndex   = hub_port,
+    .wLength  = 0
+  };
+
+  TU_LOG2("HUB Clear Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port);
+  TU_ASSERT( tuh_control_xfer(hub_addr, &request, NULL, complete_cb) );
+  return true;
+}
+
+bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb)
+{
+  tusb_control_request_t const request =
+  {
+    .bmRequestType_bit =
+    {
+      .recipient = TUSB_REQ_RCPT_OTHER,
+      .type      = TUSB_REQ_TYPE_CLASS,
+      .direction = TUSB_DIR_OUT
+    },
+    .bRequest = HUB_REQUEST_SET_FEATURE,
+    .wValue   = feature,
+    .wIndex   = hub_port,
+    .wLength  = 0
+  };
+
+  TU_LOG2("HUB Set Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port);
+  TU_ASSERT( tuh_control_xfer(hub_addr, &request, NULL, complete_cb) );
+  return true;
+}
+
+bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port, tuh_control_complete_cb_t complete_cb)
+{
+  return hub_port_set_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET, complete_cb);
+}
+
+bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, tuh_control_complete_cb_t complete_cb)
+{
+  tusb_control_request_t const request =
+  {
+    .bmRequestType_bit =
+    {
+      .recipient = TUSB_REQ_RCPT_OTHER,
+      .type      = TUSB_REQ_TYPE_CLASS,
+      .direction = TUSB_DIR_IN
+    },
+    .bRequest = HUB_REQUEST_GET_STATUS,
+    .wValue   = 0,
+    .wIndex   = hub_port,
+    .wLength  = 4
+  };
+
+  TU_LOG2("HUB Get Port Status: addr = %u port = %u\r\n", hub_addr, hub_port);
+  TU_ASSERT( tuh_control_xfer( hub_addr, &request, resp, complete_cb) );
+  return true;
+}
+
+//--------------------------------------------------------------------+
+// CLASS-USBH API (don't require to verify parameters)
+//--------------------------------------------------------------------+
+void hub_init(void)
+{
+  tu_memclr(hub_data, sizeof(hub_data));
+}
+
+bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len)
+{
+  TU_VERIFY(TUSB_CLASS_HUB == itf_desc->bInterfaceClass &&
+            0              == itf_desc->bInterfaceSubClass);
+
+  // hub driver does not support multiple TT yet
+  TU_VERIFY(itf_desc->bInterfaceProtocol <= 1);
+
+  // msc driver length is fixed
+  uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_desc_endpoint_t);
+  TU_ASSERT(drv_len <= max_len);
+
+  //------------- Interrupt Status endpoint -------------//
+  tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) tu_desc_next(itf_desc);
+
+  TU_ASSERT(TUSB_DESC_ENDPOINT  == desc_ep->bDescriptorType &&
+            TUSB_XFER_INTERRUPT == desc_ep->bmAttributes.xfer, 0);
+  
+  TU_ASSERT(usbh_edpt_open(rhport, dev_addr, desc_ep));
+
+  hub_interface_t* p_hub = get_itf(dev_addr);
+
+  p_hub->itf_num = itf_desc->bInterfaceNumber;
+  p_hub->ep_in   = desc_ep->bEndpointAddress;
+
+  return true;
+}
+
+void hub_close(uint8_t dev_addr)
+{
+  TU_VERIFY(dev_addr > CFG_TUH_DEVICE_MAX, );
+  hub_interface_t* p_hub = get_itf(dev_addr);
+
+  if (p_hub->ep_in) tu_memclr(p_hub, sizeof( hub_interface_t));
+}
+
+bool hub_status_pipe_queue(uint8_t dev_addr)
+{
+  hub_interface_t* hub_itf = get_itf(dev_addr);
+  return usbh_edpt_xfer(dev_addr, hub_itf->ep_in, &hub_itf->status_change, 1);
+}
+
+
+//--------------------------------------------------------------------+
+// Set Configure
+//--------------------------------------------------------------------+
+
+static bool config_set_port_power (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static bool config_port_power_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+
+bool hub_set_config(uint8_t dev_addr, uint8_t itf_num)
+{
+  hub_interface_t* p_hub = get_itf(dev_addr);
+  TU_ASSERT(itf_num == p_hub->itf_num);
+
+  // Get Hub Descriptor
+  tusb_control_request_t const request =
+  {
+    .bmRequestType_bit =
+    {
+      .recipient = TUSB_REQ_RCPT_DEVICE,
+      .type      = TUSB_REQ_TYPE_CLASS,
+      .direction = TUSB_DIR_IN
+    },
+    .bRequest = HUB_REQUEST_GET_DESCRIPTOR,
+    .wValue   = 0,
+    .wIndex   = 0,
+    .wLength  = sizeof(descriptor_hub_desc_t)
+  };
+
+  TU_ASSERT( tuh_control_xfer(dev_addr, &request, _hub_buffer, config_set_port_power) );
+
+  return true;
+}
+
+static bool config_set_port_power (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+{
+  (void) request;
+  TU_ASSERT(XFER_RESULT_SUCCESS == result);
+
+  hub_interface_t* p_hub = get_itf(dev_addr);
+
+  // only use number of ports in hub descriptor
+  descriptor_hub_desc_t const* desc_hub = (descriptor_hub_desc_t const*) _hub_buffer;
+  p_hub->port_count = desc_hub->bNbrPorts;
+
+  // May need to GET_STATUS
+
+  // Set Port Power to be able to detect connection, starting with port 1
+  uint8_t const hub_port = 1;
+  return hub_port_set_feature(dev_addr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete);
+}
+
+static bool config_port_power_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+{
+  TU_ASSERT(XFER_RESULT_SUCCESS == result);
+   hub_interface_t* p_hub = get_itf(dev_addr);
+
+  if (request->wIndex == p_hub->port_count)
+  {
+    // All ports are power -> queue notification status endpoint and
+    // complete the SET CONFIGURATION
+    TU_ASSERT( usbh_edpt_xfer(dev_addr, p_hub->ep_in, &p_hub->status_change, 1) );
+
+    usbh_driver_set_config_complete(dev_addr, p_hub->itf_num);
+  }else
+  {
+    // power next port
+    uint8_t const hub_port = (uint8_t) (request->wIndex + 1);
+    return hub_port_set_feature(dev_addr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete);
+  }
+
+  return true;
+}
+
+//--------------------------------------------------------------------+
+// Connection Changes
+//--------------------------------------------------------------------+
+
+static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static bool connection_clear_conn_change_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static bool connection_port_reset_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+
+// callback as response of interrupt endpoint polling
+bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes)
+{
+  (void) xferred_bytes; // TODO can be more than 1 for hub with lots of ports
+  (void) ep_addr;
+  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+
+  hub_interface_t* p_hub = get_itf(dev_addr);
+
+  TU_LOG2("  Port Status Change = 0x%02X\r\n", p_hub->status_change);
+
+  // Hub ignore bit0 in status change
+  for (uint8_t port=1; port <= p_hub->port_count; port++)
+  {
+    if ( tu_bit_test(p_hub->status_change, port) )
+    {
+      hub_port_get_status(dev_addr, port, &p_hub->port_status, connection_get_status_complete);
+      break;
+    }
+  }
+
+  // NOTE: next status transfer is queued by usbh.c after handling this request
+
+  return true;
+}
+
+static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+{
+  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+
+  hub_interface_t* p_hub = get_itf(dev_addr);
+  uint8_t const port_num = (uint8_t) request->wIndex;
+
+  // Connection change
+  if (p_hub->port_status.change.connection)
+  {
+    // Port is powered and enabled
+    //TU_VERIFY(port_status.status_current.port_power && port_status.status_current.port_enable, );
+
+    // Acknowledge Port Connection Change
+    hub_port_clear_feature(dev_addr, port_num, HUB_FEATURE_PORT_CONNECTION_CHANGE, connection_clear_conn_change_complete);
+  }else
+  {
+    // Other changes are: Enable, Suspend, Over Current, Reset, L1 state
+    // TODO clear change
+
+    // prepare for next hub status
+    // TODO continue with status_change, or maybe we can do it again with status
+    hub_status_pipe_queue(dev_addr);
+  }
+
+  return true;
+}
+
+static bool connection_clear_conn_change_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+{
+  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+
+  hub_interface_t* p_hub = get_itf(dev_addr);
+  uint8_t const port_num = (uint8_t) request->wIndex;
+
+  if ( p_hub->port_status.status.connection )
+  {
+    // Reset port if attach event
+    hub_port_reset(dev_addr, port_num, connection_port_reset_complete);
+  }else
+  {
+    // submit detach event
+    hcd_event_t event =
+    {
+      .rhport     = usbh_get_rhport(dev_addr),
+      .event_id   = HCD_EVENT_DEVICE_REMOVE,
+      .connection =
+       {
+         .hub_addr = dev_addr,
+         .hub_port = port_num
+       }
+    };
+
+    hcd_event_handler(&event, false);
+  }
+
+  return true;
+}
+
+static bool connection_port_reset_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+{
+  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+
+  // hub_interface_t* p_hub = get_itf(dev_addr);
+  uint8_t const port_num = (uint8_t) request->wIndex;
+
+  // submit attach event
+  hcd_event_t event =
+  {
+    .rhport     = usbh_get_rhport(dev_addr),
+    .event_id   = HCD_EVENT_DEVICE_ATTACH,
+    .connection =
+    {
+      .hub_addr = dev_addr,
+      .hub_port = port_num
+    }
+  };
+
+  hcd_event_handler(&event, false);
+
+  return true;
+}
+
+#endif