diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt
new file mode 100644
index 0000000..abc4d91
--- /dev/null
+++ b/examples/device/midi_test/CMakeLists.txt
@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile
new file mode 100644
index 0000000..5a45507
--- /dev/null
+++ b/examples/device/midi_test/Makefile
@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk
diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c
new file mode 100644
index 0000000..1937484
--- /dev/null
+++ b/examples/device/midi_test/src/main.c
@@ -0,0 +1,177 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+/* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install
+ * synth software and midi connection management software. On
+ * - Linux (Ubuntu): install qsynth, qjackctl. Then connect TinyUSB output port to FLUID Synth input port
+ * - Windows: install MIDI-OX
+ * - MacOS: SimpleSynth
+ */
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void midi_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  tusb_init();
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+    midi_task();
+  }
+
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// MIDI Task
+//--------------------------------------------------------------------+
+
+// Variable that holds the current position in the sequence.
+uint32_t note_pos = 0;
+
+// Store example melody as an array of note values
+uint8_t note_sequence[] =
+{
+  74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78,
+  74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61,
+  56,61,64,68,74,78,81,86,90,93,98,102
+};
+
+void midi_task(void)
+{
+  static uint32_t start_ms = 0;
+
+  uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint
+  uint8_t const channel   = 0; // 0 for channel 1
+
+  // The MIDI interface always creates input and output port/jack descriptors
+  // regardless of these being used or not. Therefore incoming traffic should be read
+  // (possibly just discarded) to avoid the sender blocking in IO
+  uint8_t packet[4];
+  while ( tud_midi_available() ) tud_midi_packet_read(packet);
+
+  // send note periodically
+  if (board_millis() - start_ms < 286) return; // not enough time
+  start_ms += 286;
+
+  // Previous positions in the note sequence.
+  int previous = note_pos - 1;
+
+  // If we currently are at position 0, set the
+  // previous position to the last note in the sequence.
+  if (previous < 0) previous = sizeof(note_sequence) - 1;
+
+  // Send Note On for current position at full velocity (127) on channel 1.
+  uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 };
+  tud_midi_stream_write(cable_num, note_on, 3);
+
+  // Send Note Off for previous note.
+  uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0};
+  tud_midi_stream_write(cable_num, note_off, 3);
+
+  // Increment position
+  note_pos++;
+
+  // If we are at the end of the sequence, start over.
+  if (note_pos >= sizeof(note_sequence)) note_pos = 0;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h
new file mode 100644
index 0000000..61b9b65
--- /dev/null
+++ b/examples/device/midi_test/src/tusb_config.h
@@ -0,0 +1,112 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+  #error "Incorrect RHPort configuration"
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              1
+#define CFG_TUD_VENDOR            0
+
+// MIDI FIFO size of TX and RX
+#define CFG_TUD_MIDI_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_MIDI_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c
new file mode 100644
index 0000000..bd5a0ee
--- /dev/null
+++ b/examples/device/midi_test/src/usb_descriptors.c
@@ -0,0 +1,177 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_MIDI = 0,
+  ITF_NUM_MIDI_STREAMING,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_MIDI   0x02
+#else
+  #define EPNUM_MIDI   0x01
+#endif
+
+uint8_t const desc_fs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64)
+};
+
+#if TUD_OPT_HIGH_SPEED
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512)
+};
+#endif
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+
+  return _desc_str;
+}