Squashed 'third_party/pico-sdk/lib/tinyusb/' content from commit 868948f67c
Change-Id: I5d33c2566dd597be9d4b1c30d4b3723c5ef4a265
git-subtree-dir: third_party/pico-sdk/lib/tinyusb
git-subtree-split: 868948f67c90fa7c2553cdcd604b52862cf55720
Signed-off-by: Austin Schuh <austin.linux@gmail.com>
diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c
new file mode 100644
index 0000000..823c71a
--- /dev/null
+++ b/examples/device/dfu_runtime/src/main.c
@@ -0,0 +1,135 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* After device is enumerated, run following command
+ *
+ * $ dfu-util -l
+ *
+ * It should be able to list our device as in Runtime mode. Then run
+ *
+ * $ dfu-util -e
+ *
+ * This will send DETTACH command to put device into bootloader. Since this example
+ * is minimal, it doesn't actually go into DFU mode but rather change the LED blinking
+ * pattern to fast rate as indicator.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 1000 ms : device should reboot
+ * - 250 ms : device not mounted
+ * - 0 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum {
+ BLINK_DFU_MODE = 100,
+ BLINK_NOT_MOUNTED = 250,
+ BLINK_MOUNTED = 1000,
+ BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+ board_init();
+
+ tusb_init();
+
+ while (1)
+ {
+ tud_task(); // tinyusb device task
+ led_blinking_task();
+ }
+
+ return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+ blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+ blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+ (void) remote_wakeup_en;
+ blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+ blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked on DFU_DETACH request to reboot to the bootloader
+void tud_dfu_runtime_reboot_to_dfu_cb(void)
+{
+ blink_interval_ms = BLINK_DFU_MODE;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK + Indicator pulse
+//--------------------------------------------------------------------+
+
+void led_blinking_task(void)
+{
+ static uint32_t start_ms = 0;
+ static bool led_state = false;
+
+ // Blink every interval ms
+ if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+ start_ms += blink_interval_ms;
+
+ board_led_write(led_state);
+ led_state = 1 - led_state; // toggle
+}
diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h
new file mode 100644
index 0000000..bdae1d2
--- /dev/null
+++ b/examples/device/dfu_runtime/src/tusb_config.h
@@ -0,0 +1,87 @@
+/*
+ * tusb_config.h
+ *
+ * Created on: Oct 28, 2019
+ * Author: Sylvain Munaut
+ */
+
+#ifndef TUSB_CONFIG_H_
+#define TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+ #error CFG_TUSB_MCU must be defined
+#endif
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+ #define BOARD_DEVICE_RHPORT_NUM 0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+ #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+ CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56)
+ #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED
+ #else
+ #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED
+ #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if BOARD_DEVICE_RHPORT_NUM == 0
+ #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+ #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+ #error "Incorrect RHPort configuration"
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG 0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE 64
+#endif
+
+//------------- CLASS -------------//
+
+#define CFG_TUD_DFU_RUNTIME 1
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* TUSB_CONFIG_H_ */
diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c
new file mode 100644
index 0000000..0609432
--- /dev/null
+++ b/examples/device/dfu_runtime/src/usb_descriptors.c
@@ -0,0 +1,166 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "class/dfu/dfu_rt_device.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ * [MSB] HID | MSC | CDC [LSB]
+ */
+#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) )
+#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+ .bLength = sizeof(tusb_desc_device_t),
+ .bDescriptorType = TUSB_DESC_DEVICE,
+ .bcdUSB = 0x0200,
+
+ #if CFG_TUD_CDC
+ // Use Interface Association Descriptor (IAD) for CDC
+ // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+ .bDeviceClass = TUSB_CLASS_MISC,
+ .bDeviceSubClass = MISC_SUBCLASS_COMMON,
+ .bDeviceProtocol = MISC_PROTOCOL_IAD,
+ #else
+ .bDeviceClass = 0x00,
+ .bDeviceSubClass = 0x00,
+ .bDeviceProtocol = 0x00,
+ #endif
+
+ .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE,
+
+ .idVendor = 0xCafe,
+ .idProduct = USB_PID,
+ .bcdDevice = 0x0100,
+
+ .iManufacturer = 0x01,
+ .iProduct = 0x02,
+ .iSerialNumber = 0x03,
+
+ .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+ return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+ ITF_NUM_DFU_RT,
+ ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_DFU_RT_DESC_LEN)
+
+uint8_t const desc_configuration[] =
+{
+ // Config number, interface count, string index, total length, attribute, power in mA
+ TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+ // Interface number, string index, attributes, detach timeout, transfer size */
+ TUD_DFU_RT_DESCRIPTOR(ITF_NUM_DFU_RT, 4, 0x0d, 1000, 4096),
+};
+
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+ (void) index; // for multiple configurations
+ return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+ (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+ "TinyUSB", // 1: Manufacturer
+ "TinyUSB Device", // 2: Product
+ "123456", // 3: Serials, should use chip ID
+ "TinyUSB DFU runtime", // 4: DFU runtime
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+ (void) langid;
+
+ size_t chr_count;
+
+ if ( index == 0)
+ {
+ memcpy(&_desc_str[1], string_desc_arr[0], 2);
+ chr_count = 1;
+ }
+ else
+ {
+ // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+ // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+ if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+ const char* str = string_desc_arr[index];
+
+ // Cap at max char
+ chr_count = strlen(str);
+ if ( chr_count > 31 ) {
+ chr_count = 31;
+ }
+
+ // Convert ASCII string into UTF-16
+ for(uint8_t i=0; i<chr_count; i++)
+ {
+ _desc_str[1+i] = str[i];
+ }
+ }
+
+ // first byte is length (including header), second byte is string type
+ _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
+
+ return _desc_str;
+}