diff --git a/examples/device/cdc_msc/.skip.MCU_SAMD11 b/examples/device/cdc_msc/.skip.MCU_SAMD11
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/examples/device/cdc_msc/.skip.MCU_SAMD11
diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt
new file mode 100644
index 0000000..fa6e83b
--- /dev/null
+++ b/examples/device/cdc_msc/CMakeLists.txt
@@ -0,0 +1,29 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})
\ No newline at end of file
diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile
new file mode 100644
index 0000000..69b633f
--- /dev/null
+++ b/examples/device/cdc_msc/Makefile
@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk
diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c
new file mode 100644
index 0000000..131ae65
--- /dev/null
+++ b/examples/device/cdc_msc/src/main.c
@@ -0,0 +1,165 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void cdc_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+  tusb_init();
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+
+    cdc_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+void cdc_task(void)
+{
+  // connected() check for DTR bit
+  // Most but not all terminal client set this when making connection
+  // if ( tud_cdc_connected() )
+  {
+    // connected and there are data available
+    if ( tud_cdc_available() )
+    {
+      // read datas
+      char buf[64];
+      uint32_t count = tud_cdc_read(buf, sizeof(buf));
+      (void) count;
+
+      // Echo back
+      // Note: Skip echo by commenting out write() and write_flush()
+      // for throughput test e.g
+      //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
+      tud_cdc_write(buf, count);
+      tud_cdc_write_flush();
+    }
+  }
+}
+
+// Invoked when cdc when line state changed e.g connected/disconnected
+void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
+{
+  (void) itf;
+  (void) rts;
+
+  // TODO set some indicator
+  if ( dtr )
+  {
+    // Terminal connected
+  }else
+  {
+    // Terminal disconnected
+  }
+}
+
+// Invoked when CDC interface received data from host
+void tud_cdc_rx_cb(uint8_t itf)
+{
+  (void) itf;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c
new file mode 100644
index 0000000..134bda3
--- /dev/null
+++ b/examples/device/cdc_msc/src/msc_disk.c
@@ -0,0 +1,276 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#if CFG_TUD_MSC
+
+// whether host does safe-eject
+static bool ejected = false;
+
+// Some MCU doesn't have enough 8KB SRAM to store the whole disk
+// We will use Flash as read-only disk with board that has
+// CFG_EXAMPLE_MSC_READONLY defined
+
+#define README_CONTENTS \
+"This is tinyusb's MassStorage Class demo.\r\n\r\n\
+If you find any bugs or get any questions, feel free to file an\r\n\
+issue at github.com/hathach/tinyusb"
+
+enum
+{
+  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+  DISK_BLOCK_SIZE = 512
+};
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+const
+#endif
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
+{
+  //------------- Block0: Boot Sector -------------//
+  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
+  // sector_per_cluster = 1; reserved_sectors = 1;
+  // fat_num            = 1; fat12_root_entry_num = 16;
+  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
+  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
+  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
+  // FAT magic code at offset 510-511
+  {
+      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
+      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+
+      // Zero up to 2 last bytes of FAT magic code
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
+  },
+
+  //------------- Block1: FAT12 Table -------------//
+  {
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+  },
+
+  //------------- Block2: Root Directory -------------//
+  {
+      // first entry is volume label
+      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      // second entry is readme file
+      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
+      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+  },
+
+  //------------- Block3: Readme Content -------------//
+  README_CONTENTS
+};
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
+{
+  (void) lun;
+
+  const char vid[] = "TinyUSB";
+  const char pid[] = "Mass Storage";
+  const char rev[] = "1.0";
+
+  memcpy(vendor_id  , vid, strlen(vid));
+  memcpy(product_id , pid, strlen(pid));
+  memcpy(product_rev, rev, strlen(rev));
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+bool tud_msc_test_unit_ready_cb(uint8_t lun)
+{
+  (void) lun;
+
+  // RAM disk is ready until ejected
+  if (ejected) {
+    tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00);
+    return false;
+  }
+
+  return true;
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
+{
+  (void) lun;
+
+  *block_count = DISK_BLOCK_NUM;
+  *block_size  = DISK_BLOCK_SIZE;
+}
+
+// Invoked when received Start Stop Unit command
+// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
+// - Start = 1 : active mode, if load_eject = 1 : load disk storage
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
+{
+  (void) lun;
+  (void) power_condition;
+
+  if ( load_eject )
+  {
+    if (start)
+    {
+      // load disk storage
+    }else
+    {
+      // unload disk storage
+      ejected = true;
+    }
+  }
+
+  return true;
+}
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+  uint8_t const* addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+
+  return (int32_t) bufsize;
+}
+
+bool tud_msc_is_writable_cb (uint8_t lun)
+{
+  (void) lun;
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+  return false;
+#else
+  return true;
+#endif
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+#ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t* addr = msc_disk[lba] + offset;
+  memcpy(addr, buffer, bufsize);
+#else
+  (void) lba; (void) offset; (void) buffer;
+#endif
+
+  return (int32_t) bufsize;
+}
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
+{
+  // read10 & write10 has their own callback and MUST not be handled here
+
+  void const* response = NULL;
+  int32_t resplen = 0;
+
+  // most scsi handled is input
+  bool in_xfer = true;
+
+  switch (scsi_cmd[0])
+  {
+    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+      // Host is about to read/write etc ... better not to disconnect disk
+      resplen = 0;
+    break;
+
+    default:
+      // Set Sense = Invalid Command Operation
+      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+
+      // negative means error -> tinyusb could stall and/or response with failed status
+      resplen = -1;
+    break;
+  }
+
+  // return resplen must not larger than bufsize
+  if ( resplen > bufsize ) resplen = bufsize;
+
+  if ( response && (resplen > 0) )
+  {
+    if(in_xfer)
+    {
+      memcpy(buffer, response, (size_t) resplen);
+    }else
+    {
+      // SCSI output
+    }
+  }
+
+  return (int32_t) resplen;
+}
+
+#endif
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
new file mode 100644
index 0000000..499966c
--- /dev/null
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -0,0 +1,119 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
+      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+  #error "Incorrect RHPort configuration"
+#endif
+
+// This example doesn't use an RTOS
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC              1
+#define CFG_TUD_MSC              1
+#define CFG_TUD_HID              0
+#define CFG_TUD_MIDI             0
+#define CFG_TUD_VENDOR           0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// CDC Endpoint transfer buffer size, more is faster
+#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// MSC Buffer size of Device Mass storage
+#define CFG_TUD_MSC_EP_BUFSIZE   512
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c
new file mode 100644
index 0000000..40f75d6
--- /dev/null
+++ b/examples/device/cdc_msc/src/usb_descriptors.c
@@ -0,0 +1,278 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+  .bLength            = sizeof(tusb_desc_device_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE,
+  .bcdUSB             = USB_BCD,
+
+  // Use Interface Association Descriptor (IAD) for CDC
+  // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+  .idVendor           = USB_VID,
+  .idProduct          = USB_PID,
+  .bcdDevice          = 0x0100,
+
+  .iManufacturer      = 0x01,
+  .iProduct           = 0x02,
+  .iSerialNumber      = 0x03,
+
+  .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_CDC = 0,
+  ITF_NUM_CDC_DATA,
+  ITF_NUM_MSC,
+  ITF_NUM_TOTAL
+};
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
+  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_CXD56
+  // CXD56 doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number
+  // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN)
+  #define EPNUM_CDC_NOTIF   0x83
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x81
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x84
+
+#else
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x03
+  #define EPNUM_MSC_IN      0x83
+
+#endif
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
+
+// full speed configuration
+uint8_t const desc_fs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+// high speed configuration
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
+};
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // if link speed is high return fullspeed config, and vice versa
+  // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG
+  memcpy(desc_other_speed_config,
+         (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
+         CONFIG_TOTAL_LEN);
+
+  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
+
+  return desc_other_speed_config;
+}
+
+#endif // highspeed
+
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456789012",                // 3: Serials, should use chip ID
+  "TinyUSB CDC",                 // 4: CDC Interface
+  "TinyUSB MSC",                 // 5: MSC Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+
+  return _desc_str;
+}