diff --git a/cmake/FindComputeCpp.cmake b/cmake/FindComputeCpp.cmake
new file mode 100644
index 0000000..07ebed6
--- /dev/null
+++ b/cmake/FindComputeCpp.cmake
@@ -0,0 +1,245 @@
+#.rst:
+# FindComputeCpp
+#---------------
+#
+#   Copyright 2016 Codeplay Software Ltd.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use these files except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+
+#########################
+#  FindComputeCpp.cmake
+#########################
+#
+#  Tools for finding and building with ComputeCpp.
+#
+#  User must define COMPUTECPP_PACKAGE_ROOT_DIR pointing to the ComputeCpp
+#   installation.
+#
+#  Latest version of this file can be found at:
+#    https://github.com/codeplaysoftware/computecpp-sdk
+
+# Require CMake version 3.2.2 or higher
+cmake_minimum_required(VERSION 3.2.2)
+
+# Check that a supported host compiler can be found
+if(CMAKE_COMPILER_IS_GNUCXX)
+    # Require at least gcc 4.8
+    if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
+      message(FATAL_ERROR
+        "host compiler - Not found! (gcc version must be at least 4.8)")
+    # Require the GCC dual ABI to be disabled for 5.1 or higher
+    elseif (CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 5.1)
+      set(COMPUTECPP_DISABLE_GCC_DUAL_ABI "True")
+      message(STATUS
+        "host compiler - gcc ${CMAKE_CXX_COMPILER_VERSION} (note pre 5.1 gcc ABI enabled)")
+    else()
+      message(STATUS "host compiler - gcc ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+    # Require at least clang 3.6
+    if (${CMAKE_CXX_COMPILER_VERSION} VERSION_LESS 3.6)
+      message(FATAL_ERROR
+        "host compiler - Not found! (clang version must be at least 3.6)")
+    else()
+      message(STATUS "host compiler - clang ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+else()
+  message(WARNING
+    "host compiler - Not found! (ComputeCpp supports GCC and Clang, see readme)")
+endif()
+
+set(COMPUTECPP_64_BIT_DEFAULT ON)
+option(COMPUTECPP_64_BIT_CODE "Compile device code in 64 bit mode"
+        ${COMPUTECPP_64_BIT_DEFAULT})
+mark_as_advanced(COMPUTECPP_64_BIT_CODE)
+
+# Find OpenCL package
+find_package(OpenCL REQUIRED)
+
+# Find ComputeCpp packagee
+if(NOT COMPUTECPP_PACKAGE_ROOT_DIR)
+  message(FATAL_ERROR
+    "ComputeCpp package - Not found! (please set COMPUTECPP_PACKAGE_ROOT_DIR")
+else()
+  message(STATUS "ComputeCpp package - Found")
+endif()
+option(COMPUTECPP_PACKAGE_ROOT_DIR "Path to the ComputeCpp Package")
+
+# Obtain the path to compute++
+find_program(COMPUTECPP_DEVICE_COMPILER compute++ PATHS
+  ${COMPUTECPP_PACKAGE_ROOT_DIR} PATH_SUFFIXES bin)
+if (EXISTS ${COMPUTECPP_DEVICE_COMPILER})
+  mark_as_advanced(COMPUTECPP_DEVICE_COMPILER)
+  message(STATUS "compute++ - Found")
+else()
+  message(FATAL_ERROR "compute++ - Not found! (${COMPUTECPP_DEVICE_COMPILER})")
+endif()
+
+# Obtain the path to computecpp_info
+find_program(COMPUTECPP_INFO_TOOL computecpp_info PATHS
+  ${COMPUTECPP_PACKAGE_ROOT_DIR} PATH_SUFFIXES bin)
+if (EXISTS ${COMPUTECPP_INFO_TOOL})
+  mark_as_advanced(${COMPUTECPP_INFO_TOOL})
+  message(STATUS "computecpp_info - Found")
+else()
+  message(FATAL_ERROR "computecpp_info - Not found! (${COMPUTECPP_INFO_TOOL})")
+endif()
+
+# Obtain the path to the ComputeCpp runtime library
+find_library(COMPUTECPP_RUNTIME_LIBRARY ComputeCpp PATHS ${COMPUTECPP_PACKAGE_ROOT_DIR}
+  HINTS ${COMPUTECPP_PACKAGE_ROOT_DIR}/lib PATH_SUFFIXES lib
+  DOC "ComputeCpp Runtime Library" NO_DEFAULT_PATH)
+
+if (EXISTS ${COMPUTECPP_RUNTIME_LIBRARY})
+  mark_as_advanced(COMPUTECPP_RUNTIME_LIBRARY)
+  message(STATUS "libComputeCpp.so - Found")
+else()
+  message(FATAL_ERROR "libComputeCpp.so - Not found!")
+endif()
+
+# Obtain the ComputeCpp include directory
+set(COMPUTECPP_INCLUDE_DIRECTORY ${COMPUTECPP_PACKAGE_ROOT_DIR}/include/)
+if (NOT EXISTS ${COMPUTECPP_INCLUDE_DIRECTORY})
+  message(FATAL_ERROR "ComputeCpp includes - Not found!")
+else()
+  message(STATUS "ComputeCpp includes - Found")
+endif()
+
+# Obtain the package version
+execute_process(COMMAND ${COMPUTECPP_INFO_TOOL} "--dump-version"
+  OUTPUT_VARIABLE COMPUTECPP_PACKAGE_VERSION
+  RESULT_VARIABLE COMPUTECPP_INFO_TOOL_RESULT OUTPUT_STRIP_TRAILING_WHITESPACE)
+if(NOT COMPUTECPP_INFO_TOOL_RESULT EQUAL "0")
+  message(FATAL_ERROR "Package version - Error obtaining version!")
+else()
+  mark_as_advanced(COMPUTECPP_PACKAGE_VERSION)
+  message(STATUS "Package version - ${COMPUTECPP_PACKAGE_VERSION}")
+endif()
+
+# Obtain the device compiler flags
+execute_process(COMMAND ${COMPUTECPP_INFO_TOOL} "--dump-device-compiler-flags"
+  OUTPUT_VARIABLE COMPUTECPP_DEVICE_COMPILER_FLAGS
+  RESULT_VARIABLE COMPUTECPP_INFO_TOOL_RESULT OUTPUT_STRIP_TRAILING_WHITESPACE)
+if(NOT COMPUTECPP_INFO_TOOL_RESULT EQUAL "0")
+  message(FATAL_ERROR "compute++ flags - Error obtaining compute++ flags!")
+else()
+  mark_as_advanced(COMPUTECPP_COMPILER_FLAGS)
+  message(STATUS "compute++ flags - ${COMPUTECPP_DEVICE_COMPILER_FLAGS}")
+endif()
+
+set(COMPUTECPP_DEVICE_COMPILER_FLAGS ${COMPUTECPP_DEVICE_COMPILER_FLAGS} -sycl-compress-name -no-serial-memop -DEIGEN_NO_ASSERTION_CHECKING=1)
+
+# Check if the platform is supported
+execute_process(COMMAND ${COMPUTECPP_INFO_TOOL} "--dump-is-supported"
+  OUTPUT_VARIABLE COMPUTECPP_PLATFORM_IS_SUPPORTED
+  RESULT_VARIABLE COMPUTECPP_INFO_TOOL_RESULT OUTPUT_STRIP_TRAILING_WHITESPACE)
+if(NOT COMPUTECPP_INFO_TOOL_RESULT EQUAL "0")
+  message(FATAL_ERROR "platform - Error checking platform support!")
+else()
+  mark_as_advanced(COMPUTECPP_PLATFORM_IS_SUPPORTED)
+  if (COMPUTECPP_PLATFORM_IS_SUPPORTED)
+    message(STATUS "platform - your system can support ComputeCpp")
+  else()
+    message(STATUS "platform - your system CANNOT support ComputeCpp")
+  endif()
+endif()
+
+####################
+#   __build_sycl
+####################
+#
+#  Adds a custom target for running compute++ and adding a dependency for the
+#  resulting integration header.
+#
+#  targetName : Name of the target.
+#  sourceFile : Source file to be compiled.
+#  binaryDir : Intermediate directory to output the integration header.
+#
+function(__build_spir targetName sourceFile binaryDir)
+
+  # Retrieve source file name.
+  get_filename_component(sourceFileName ${sourceFile} NAME)
+
+  # Set the path to the Sycl file.
+  set(outputSyclFile ${binaryDir}/${sourceFileName}.sycl)
+
+  # Add any user-defined include to the device compiler
+  get_property(includeDirectories DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY
+    INCLUDE_DIRECTORIES)
+  set(device_compiler_includes "")
+  foreach(directory ${includeDirectories})
+    set(device_compiler_includes "-I${directory}" ${device_compiler_includes})
+  endforeach()
+  if (CMAKE_INCLUDE_PATH)
+    foreach(directory ${CMAKE_INCLUDE_PATH})
+      set(device_compiler_includes "-I${directory}"
+        ${device_compiler_includes})
+    endforeach()
+  endif()
+
+  # Convert argument list format
+  separate_arguments(COMPUTECPP_DEVICE_COMPILER_FLAGS)
+
+  # Add custom command for running compute++
+  add_custom_command(
+    OUTPUT ${outputSyclFile}
+    COMMAND ${COMPUTECPP_DEVICE_COMPILER}
+            ${COMPUTECPP_DEVICE_COMPILER_FLAGS}
+            -isystem ${COMPUTECPP_INCLUDE_DIRECTORY}
+            ${COMPUTECPP_PLATFORM_SPECIFIC_ARGS}
+            ${device_compiler_includes}
+            -o ${outputSyclFile}
+            -c ${CMAKE_CURRENT_SOURCE_DIR}/${sourceFile}
+    DEPENDS ${sourceFile}
+    WORKING_DIRECTORY ${binaryDir}
+  COMMENT "Building ComputeCpp integration header file ${outputSyclFile}")
+
+  # Add a custom target for the generated integration header
+  add_custom_target(${targetName}_integration_header DEPENDS ${outputSyclFile})
+
+  # Add a dependency on the integration header
+  add_dependencies(${targetName} ${targetName}_integration_header)
+
+  # Set the host compiler C++ standard to C++11
+  set_property(TARGET ${targetName} PROPERTY CXX_STANDARD 11)
+
+  # Disable GCC dual ABI on GCC 5.1 and higher
+  if(COMPUTECPP_DISABLE_GCC_DUAL_ABI)
+    set_property(TARGET ${targetName} APPEND PROPERTY COMPILE_DEFINITIONS
+      "_GLIBCXX_USE_CXX11_ABI=0")
+  endif()
+
+endfunction()
+
+#######################
+#  add_sycl_to_target
+#######################
+#
+#  Adds a SYCL compilation custom command associated with an existing
+#  target and sets a dependancy on that new command.
+#
+#  targetName : Name of the target to add a SYCL to.
+#  sourceFile : Source file to be compiled for SYCL.
+#  binaryDir : Intermediate directory to output the integration header.
+#
+function(add_sycl_to_target targetName sourceFile binaryDir)
+
+  # Add custom target to run compute++ and generate the integration header
+  __build_spir(${targetName} ${sourceFile} ${binaryDir})
+
+  # Link with the ComputeCpp runtime library
+  target_link_libraries(${targetName} PUBLIC ${COMPUTECPP_RUNTIME_LIBRARY}
+                        PUBLIC ${OpenCL_LIBRARIES})
+
+endfunction(add_sycl_to_target)